lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <35286B1AE75A7C47BFF0870081A31B4B3A9B501754@SAFEX1MAIL4.st.com>
Date:	Tue, 27 Nov 2012 09:44:17 +0100
From:	Mathias LEBLANC <Mathias.LEBLANC@...com>
To:	Kent Yoder <key@...ux.vnet.ibm.com>
Cc:	Rajiv Andrade <mail@...jiv.net>,
	Marcel Selhorst <tpmdd@...horst.net>,
	Sirrix AG <tpmdd@...rix.com>,
	"tpmdd-devel@...ts.sourceforge.net" 
	<tpmdd-devel@...ts.sourceforge.net>,
	Debora Velarde <debora@...ux.vnet.ibm.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	Jean-Luc BLANC <jean-luc.blanc@...com>
Subject: RE: [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x

Hi Kent,

What's version of the kernel do you compiled?
I don't understand why you have some problem with formating, i have send you the patch with no error and warning of code formating.
The tpm_continue_selftest_nocheck()  (in kernel 3.x.x) and tpm_continue_selftest() (in kernel 2.6.x) is called to have the tpm ready.
If the tpm_continue_selftest is not called by the driver, it will be use in the applications.

Regards,

Matthias Leblanc
________________________________________
From: Kent Yoder [key@...ux.vnet.ibm.com]
Sent: 26 November 2012 18:46
To: Mathias LEBLANC
Cc: Rajiv Andrade; Marcel Selhorst; Sirrix AG; tpmdd-devel@...ts.sourceforge.net; Debora Velarde; linux-kernel@...r.kernel.org; Jean-Luc BLANC
Subject: Re: [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x

Hi Mathias,

On Mon, Nov 19, 2012 at 11:15:21PM +0100, Mathias Leblanc wrote:
>  * STMicroelectronics version 1.2.0, Copyright (C) 2010
>  * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
>  * This is free software, and you are welcome to redistribute it
>  * under certain conditions.
>
> This is the driver for TPM chip from ST Microelectronics.
>
> If you have a TPM security chip from STMicroelectronics working with
> an I2C, in menuconfig or .config choose the tpm driver on
> device --> tpm and activate the protocol of your choice before compiling
> the kernel.
> The driver will be accessible from within Linux.
>
> Tested on linux x86/x64, beagleboard REV B & XM REV C and CHROMIUM OS
> on kernel 3.x.x
>
> Signed-off-by: Mathias Leblanc <mathias.leblanc@...com>
> ---
>  drivers/char/tpm/tpm_stm_st33_i2c.c  |  903 ++++++++++++++++++++++++++++++++++
>  drivers/char/tpm/tpm_stm_st33_i2c.h  |   81 +++
>  include/linux/i2c/tpm_stm_st33_i2c.h |   47 ++
>  3 files changed, 1031 insertions(+)
>  create mode 100644 drivers/char/tpm/tpm_stm_st33_i2c.c
>  create mode 100644 drivers/char/tpm/tpm_stm_st33_i2c.h
>  create mode 100644 include/linux/i2c/tpm_stm_st33_i2c.h

  I'm still getting the compiler errors I mentioned earlier. I've fixed
them up with the patch below (plus some formatting), all except for the
tpm_continue_selftest_nocheck() problem. Do you really need to call
continue selftest on resume?  That strikes me as out of place here.
What's making the call to the TPM to start the self test in that case?

Please test with the patch below.

Thanks,
Kent


diff --git a/drivers/char/tpm/tpm_stm_st33_i2c.c b/drivers/char/tpm/tpm_stm_st33_i2c.c
index 52f3380..67f81b6 100644
--- a/drivers/char/tpm/tpm_stm_st33_i2c.c
+++ b/drivers/char/tpm/tpm_stm_st33_i2c.c
@@ -722,7 +722,7 @@ tpm_st33_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
                        goto _irq_set;

                intmask = TPM_GLOBAL_INT_ENABLE;
-               err = I2C_WRITE_DATA(client, TPM_INT_ENABLE + 3, &intmask, 1);
+               err = I2C_WRITE_DATA(client, (TPM_INT_ENABLE + 3), &intmask, 1);
                if (err < 0)
                        goto _irq_set;

@@ -820,10 +820,10 @@ static int tpm_st33_i2c_pm_suspend(struct i2c_client *client, pm_message_t mesg)

        if (power_mgt)
                gpio_set_value(pin_infos->io_lpcpd, 0);
-       else{
+       else {
                if (chip->data_buffer == NULL)
                        chip->data_buffer = pin_infos->tpm_i2c_buffer[0];
-               ret = tpm_pm_suspend(&client->dev, mesg);
+               ret = tpm_pm_suspend(&client->dev);
        }
        return ret;
 }                              /* tpm_st33_i2c_suspend() */
@@ -848,12 +848,12 @@ static int tpm_st33_i2c_pm_resume(struct i2c_client *client)
                                          (chip->vendor.status(chip) &&
                                          TPM_STS_VALID) == TPM_STS_VALID,
                                          chip->vendor.timeout_b);
-       } else{
-       if (chip->data_buffer == NULL)
-               chip->data_buffer = pin_infos->tpm_i2c_buffer[0];
-       ret = tpm_pm_resume(&client->dev);
-       if (!ret)
-               tpm_continue_selftest_nocheck(chip);
+       } else {
+               if (chip->data_buffer == NULL)
+                       chip->data_buffer = pin_infos->tpm_i2c_buffer[0];
+               ret = tpm_pm_resume(&client->dev);
+               if (!ret)
+                       tpm_continue_selftest_nocheck(chip);
        }
        return ret;
 }                              /* tpm_st33_i2c_pm_resume() */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ