| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1354028674-23685-7-git-send-email-mark.langsdorf@calxeda.com>
Date: Tue, 27 Nov 2012 09:04:34 -0600
From: Mark Langsdorf <mark.langsdorf@...xeda.com>
To: linux-kernel@...r.kernel.org, cpufreq@...r.kernel.org,
linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: Mark Langsdorf <mark.langsdorf@...xeda.com>,
devicetree-discuss@...ts.ozlabs.org
Subject: [PATCH 6/6 v5] cpufreq, highbank: add support for highbank cpufreq
Highbank processors depend on the external ECME to perform voltage
management based on a requested frequency. Communication between the
A9 cores and the ECME happens over the pl320 IPC channel.
Signed-off-by: Mark Langsdorf <mark.langsdorf@...xeda.com>
Cc: devicetree-discuss@...ts.ozlabs.org
---
Changes from v4
Removed erroneous changes to arch/arm/Kconfig.
Removed unnecessary changes to drivers/cpufreq/Kconfig.arm
Alphabetized additions to arch/arm/mach-highbank/Kconfig
Changed ipc call and header to match new ipc location in
drivers/mailbox.
Changes from v3
None.
Changes from v2
Changed transition latency binding in code to match documentation.
Changes from v1
Added highbank specific Kconfig changes.
.../bindings/cpufreq/highbank-cpufreq.txt | 53 +++++
arch/arm/boot/dts/highbank.dts | 10 +
arch/arm/mach-highbank/Kconfig | 2 +
drivers/cpufreq/Kconfig.arm | 13 ++
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/highbank-cpufreq.c | 229 +++++++++++++++++++++
6 files changed, 308 insertions(+)
create mode 100644 Documentation/devicetree/bindings/cpufreq/highbank-cpufreq.txt
create mode 100644 drivers/cpufreq/highbank-cpufreq.c
diff --git a/Documentation/devicetree/bindings/cpufreq/highbank-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/highbank-cpufreq.txt
new file mode 100644
index 0000000..1d5a836
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/highbank-cpufreq.txt
@@ -0,0 +1,53 @@
+Highbank cpufreq driver
+
+This is cpufreq driver for Calxeda ECX-1000 (highbank) processor. It is based
+on the generic cpu0 driver and uses a similar format for bindings. Since
+the EnergyCore Management Engine maintains the voltage based on the
+frequency, the voltage component of the operating points can be set to any
+arbitrary values.
+
+Both required properties listed below must be defined under node /cpus/cpu@0.
+
+Required properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
+ for details
+- transition-latency: Specify the possible maximum transition latency for clock,
+ in unit of nanoseconds.
+
+Examples:
+
+cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz ignored */
+ 790000 1000000
+ 396000 1000000
+ 198000 1000000
+ >;
+ transition-latency = <200000>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 0c6fc34..8624c94 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -36,6 +36,16 @@
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
+ operating-points = <
+ /* kHz ignored */
+ 1300000 1000000
+ 1200000 1000000
+ 1100000 1000000
+ 800000 1000000
+ 400000 1000000
+ 200000 1000000
+ >;
+ transition-latency = <100000>;
};
cpu@1 {
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 2896881..b7862da 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,5 +1,7 @@
config ARCH_HIGHBANK
bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 5961e64..7a8bcdc 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -76,3 +76,16 @@ config ARM_EXYNOS5250_CPUFREQ
help
This adds the CPUFreq driver for Samsung EXYNOS5250
SoC.
+
+config ARM_HIGHBANK_CPUFREQ
+ tristate "Calxeda Highbank-based"
+ depends on ARCH_HIGHBANK
+ select CPU_FREQ_TABLE
+ select PM_OPP
+ default m
+ help
+ This adds the CPUFreq driver for Calxeda Highbank SoC
+ based boards.
+
+ If in doubt, say N.
+
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 1bc90e1..9e8f12a 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
##################################################################################
# PowerPC platform drivers
diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c
new file mode 100644
index 0000000..f2ac342
--- /dev/null
+++ b/drivers/cpufreq/highbank-cpufreq.c
@@ -0,0 +1,229 @@
+/*
+ * Copyright (C) 2012 Calxeda, Inc.
+ *
+ * derived from cpufreq-cpu0 by Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/opp.h>
+#include <linux/slab.h>
+#include <linux/mailbox.h>
+
+#define HB_CPUFREQ_CHANGE_NOTE 0x80000001
+
+static unsigned int transition_latency;
+
+static struct device *cpu_dev;
+static struct clk *cpu_clk;
+static struct cpufreq_frequency_table *freq_table;
+
+static int hb_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+static unsigned int hb_get_speed(unsigned int cpu)
+{
+ return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int hb_voltage_change(unsigned int freq)
+{
+ int i;
+ u32 msg[7];
+
+ msg[0] = HB_CPUFREQ_CHANGE_NOTE;
+ msg[1] = freq / 1000;
+ for (i = 2; i < 7; i++)
+ msg[i] = 0;
+
+ return ipc_transmit(msg);
+}
+
+static int hb_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ unsigned long freq_Hz;
+ unsigned int index, cpu;
+ int ret;
+
+ ret = cpufreq_frequency_table_target(policy, freq_table, target_freq,
+ relation, &index);
+ if (ret) {
+ pr_err("failed to match target freqency %d: %d\n",
+ target_freq, ret);
+ return ret;
+ }
+
+ freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
+ if (freq_Hz < 0)
+ freq_Hz = freq_table[index].frequency * 1000;
+ freqs.new = freq_Hz / 1000;
+ freqs.old = clk_get_rate(cpu_clk) / 1000;
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ for_each_online_cpu(cpu) {
+ freqs.cpu = cpu;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
+
+ pr_debug("%u MHz --> %u MHz\n", freqs.old / 1000, freqs.new / 1000);
+
+ /* scaling up? scale voltage before frequency */
+ if (freqs.new > freqs.old) {
+ ret = hb_voltage_change(freqs.new);
+ if (ret) {
+ freqs.new = freqs.old;
+ return -EAGAIN;
+ }
+ }
+
+ ret = clk_set_rate(cpu_clk, freqs.new * 1000);
+ if (ret) {
+ pr_err("failed to set clock rate: %d\n", ret);
+ hb_voltage_change(freqs.old);
+ return ret;
+ }
+
+ /* scaling down? scale voltage after frequency */
+ if (freqs.new < freqs.old) {
+ ret = hb_voltage_change(freqs.new);
+ if (ret) {
+ if (clk_set_rate(cpu_clk, freqs.old * 1000))
+ pr_err("also failed to reset freq\n");
+ freqs.new = freqs.old;
+ return -EAGAIN;
+ }
+ }
+
+ for_each_online_cpu(cpu) {
+ freqs.cpu = cpu;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
+
+ return 0;
+}
+
+static int hb_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (ret) {
+ pr_err("invalid frequency table: %d\n", ret);
+ return ret;
+ }
+
+ policy->cpuinfo.transition_latency = transition_latency;
+ policy->cur = clk_get_rate(cpu_clk) / 1000;
+
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
+ cpumask_setall(policy->cpus);
+
+ cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+
+ return 0;
+}
+
+static int hb_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+
+ return 0;
+}
+
+static struct freq_attr *hb_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver hb_cpufreq_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = hb_verify_speed,
+ .target = hb_set_target,
+ .get = hb_get_speed,
+ .init = hb_cpufreq_init,
+ .exit = hb_cpufreq_exit,
+ .name = "highbank-cpufreq",
+ .attr = hb_cpufreq_attr,
+};
+
+static int __devinit hb_cpufreq_driver_init(void)
+{
+ struct device_node *np;
+ int ret;
+
+ np = of_find_node_by_path("/cpus/cpu@0");
+ if (!np) {
+ pr_err("failed to find highbank cpufreq node\n");
+ return -ENOENT;
+ }
+
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev) {
+ pr_err("failed to get highbank cpufreq device\n");
+ ret = -ENODEV;
+ goto out_put_node;
+ }
+
+ cpu_dev->of_node = np;
+
+ cpu_clk = clk_get(cpu_dev, NULL);
+ if (IS_ERR(cpu_clk)) {
+ ret = PTR_ERR(cpu_clk);
+ pr_err("failed to get cpu0 clock: %d\n", ret);
+ goto out_put_node;
+ }
+
+ ret = of_init_opp_table(cpu_dev);
+ if (ret) {
+ pr_err("failed to init OPP table: %d\n", ret);
+ goto out_put_node;
+ }
+
+ ret = opp_init_cpufreq_table(cpu_dev, &freq_table);
+ if (ret) {
+ pr_err("failed to init cpufreq table: %d\n", ret);
+ goto out_put_node;
+ }
+
+ if (of_property_read_u32(np, "transition-latency", &transition_latency))
+ transition_latency = CPUFREQ_ETERNAL;
+
+ ret = cpufreq_register_driver(&hb_cpufreq_driver);
+ if (ret) {
+ pr_err("failed register driver: %d\n", ret);
+ goto out_free_table;
+ }
+
+ of_node_put(np);
+ return 0;
+
+out_free_table:
+ opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_put_node:
+ of_node_put(np);
+ return ret;
+}
+late_initcall(hb_cpufreq_driver_init);
+
+MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@...xeda.com>");
+MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver");
+MODULE_LICENSE("GPL");
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists