| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1354123534-6927-4-git-send-email-broonie@opensource.wolfsonmicro.com>
Date: Wed, 28 Nov 2012 17:25:34 +0000
From: Mark Brown <broonie@...nsource.wolfsonmicro.com>
To: Liam Girdwood <lrg@...com>
Cc: linux-kernel@...r.kernel.org, patches@...nsource.wolfsonmicro.com,
Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH 4/4] regulator: arizona-ldo1: Support 1.8V mode
Some Arizona device support a 1.8V output mode. Enable this in the driver.
Signed-off-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
---
drivers/mfd/wm5102-tables.c | 3 +
drivers/regulator/arizona-ldo1.c | 107 ++++++++++++++++++++++++++++++++-
include/linux/mfd/arizona/registers.h | 16 +++++
3 files changed, 125 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index fbe0304..065ffd3 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -274,6 +274,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000154, 0x0000 }, /* R340 - Rate Estimator 3 */
{ 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */
{ 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */
+ { 0x00000161, 0x0000 }, /* R353 - Dynamic Frequency Scaling 1 */
{ 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */
{ 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */
{ 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */
@@ -1064,6 +1065,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_RATE_ESTIMATOR_3:
case ARIZONA_RATE_ESTIMATOR_4:
case ARIZONA_RATE_ESTIMATOR_5:
+ case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1:
case ARIZONA_FLL1_CONTROL_1:
case ARIZONA_FLL1_CONTROL_2:
case ARIZONA_FLL1_CONTROL_3:
@@ -1098,6 +1100,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL2_GPIO_CLOCK:
case ARIZONA_MIC_CHARGE_PUMP_1:
case ARIZONA_LDO1_CONTROL_1:
+ case ARIZONA_LDO1_CONTROL_2:
case ARIZONA_LDO2_CONTROL_1:
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index e4b7dd4..ed7beec 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -34,6 +34,108 @@ struct arizona_ldo1 {
struct regulator_init_data init_data;
};
+static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
+
+ if (selector == rdev->desc->n_voltages - 1)
+ return 1800000;
+ else
+ return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
+}
+
+static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int sel;
+
+ sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
+ if (sel >= rdev->desc->n_voltages)
+ sel = rdev->desc->n_voltages - 1;
+
+ return sel;
+}
+
+static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned sel)
+{
+ struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
+ struct regmap *regmap = ldo->arizona->regmap;
+ unsigned int val;
+ int ret;
+
+ if (sel == rdev->desc->n_voltages - 1)
+ val = ARIZONA_LDO1_HI_PWR;
+ else
+ val = 0;
+
+ ret = regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_2,
+ ARIZONA_LDO1_HI_PWR, val);
+ if (ret != 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
+ ARIZONA_SUBSYS_MAX_FREQ, val);
+ if (ret != 0)
+ return ret;
+
+ if (val)
+ return 0;
+
+ val = sel << ARIZONA_LDO1_VSEL_SHIFT;
+
+ return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
+ ARIZONA_LDO1_VSEL_MASK, val);
+}
+
+static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
+ struct regmap *regmap = ldo->arizona->regmap;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_2, &val);
+ if (ret != 0)
+ return ret;
+
+ if (val & ARIZONA_LDO1_HI_PWR)
+ return rdev->desc->n_voltages - 1;
+
+ ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
+ if (ret != 0)
+ return ret;
+
+ return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
+}
+
+static struct regulator_ops arizona_ldo1_hc_ops = {
+ .list_voltage = arizona_ldo1_hc_list_voltage,
+ .map_voltage = arizona_ldo1_hc_map_voltage,
+ .get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
+ .set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
+ .get_bypass = regulator_get_bypass_regmap,
+ .set_bypass = regulator_set_bypass_regmap,
+};
+
+static const struct regulator_desc arizona_ldo1_hc = {
+ .name = "LDO1",
+ .supply_name = "LDOVDD",
+ .type = REGULATOR_VOLTAGE,
+ .ops = &arizona_ldo1_hc_ops,
+
+ .bypass_reg = ARIZONA_LDO1_CONTROL_1,
+ .bypass_mask = ARIZONA_LDO1_BYPASS,
+ .min_uV = 900000,
+ .uV_step = 50000,
+ .n_voltages = 8,
+ .enable_time = 500,
+
+ .owner = THIS_MODULE,
+};
+
static struct regulator_ops arizona_ldo1_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -81,6 +183,7 @@ static const struct regulator_init_data arizona_ldo1_default = {
static int arizona_ldo1_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+ const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_ldo1 *ldo1;
int ret;
@@ -100,9 +203,11 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
*/
switch (arizona->type) {
case WM5102:
+ desc = &arizona_ldo1_hc;
ldo1->init_data = arizona_ldo1_dvfs;
break;
default:
+ desc = &arizona_ldo1;
ldo1->init_data = arizona_ldo1_default;
break;
}
@@ -121,7 +226,7 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
else
config.init_data = &ldo1->init_data;
- ldo1->regulator = regulator_register(&arizona_ldo1, &config);
+ ldo1->regulator = regulator_register(desc, &config);
if (IS_ERR(ldo1->regulator)) {
ret = PTR_ERR(ldo1->regulator);
dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n",
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 7671a28..ba26e99 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -76,6 +76,7 @@
#define ARIZONA_RATE_ESTIMATOR_3 0x154
#define ARIZONA_RATE_ESTIMATOR_4 0x155
#define ARIZONA_RATE_ESTIMATOR_5 0x156
+#define ARIZONA_DYNAMIC_FREQUENCY_SCALING_1 0x161
#define ARIZONA_FLL1_CONTROL_1 0x171
#define ARIZONA_FLL1_CONTROL_2 0x172
#define ARIZONA_FLL1_CONTROL_3 0x173
@@ -110,6 +111,7 @@
#define ARIZONA_FLL2_GPIO_CLOCK 0x1AA
#define ARIZONA_MIC_CHARGE_PUMP_1 0x200
#define ARIZONA_LDO1_CONTROL_1 0x210
+#define ARIZONA_LDO1_CONTROL_2 0x212
#define ARIZONA_LDO2_CONTROL_1 0x213
#define ARIZONA_MIC_BIAS_CTRL_1 0x218
#define ARIZONA_MIC_BIAS_CTRL_2 0x219
@@ -1574,6 +1576,13 @@
#define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH 5 /* SAMPLE_RATE_DETECT_D - [4:0] */
/*
+ * R353 (0x161) - Dynamic Frequency Scaling 1
+ */
+#define ARIZONA_SUBSYS_MAX_FREQ 0x0001 /* SUBSYS_MAX_FREQ */
+#define ARIZONA_SUBSYS_MAX_FREQ_SHIFT 0 /* SUBSYS_MAX_FREQ */
+#define ARIZONA_SUBSYS_MAX_FREQ_WIDTH 1 /* SUBSYS_MAX_FREQ */
+
+/*
* R369 (0x171) - FLL1 Control 1
*/
#define ARIZONA_FLL1_FREERUN 0x0002 /* FLL1_FREERUN */
@@ -1889,6 +1898,13 @@
#define ARIZONA_LDO1_ENA_WIDTH 1 /* LDO1_ENA */
/*
+ * R530 (0x212) - LDO1 Control 2
+ */
+#define ARIZONA_LDO1_HI_PWR 0x0001 /* LDO1_HI_PWR */
+#define ARIZONA_LDO1_HI_PWR_SHIFT 0 /* LDO1_HI_PWR */
+#define ARIZONA_LDO1_HI_PWR_WIDTH 1 /* LDO1_HI_PWR */
+
+/*
* R531 (0x213) - LDO2 Control 1
*/
#define ARIZONA_LDO2_VSEL_MASK 0x07E0 /* LDO2_VSEL - [10:5] */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists