Message-ID: <1354162826.1809.241.camel@bling.home>
Date:	Wed, 28 Nov 2012 21:20:26 -0700
From:	Alex Williamson <alex.williamson@...hat.com>
To:	Alexey Kardashevskiy <aik@...abs.ru>
Cc:	Benjamin Herrenschmidt <benh@...nel.crashing.org>,
	Paul Mackerras <paulus@...ba.org>,
	linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
	David Gibson <david@...son.dropbear.id.au>
Subject: Re: [PATCH] vfio powerpc: enabled on powernv platform

On Thu, 2012-11-29 at 14:53 +1100, Alexey Kardashevskiy wrote:
> This patch initializes IOMMU groups based on the IOMMU
> configuration discovered during the PCI scan on POWERNV
> (POWER non virtualized) platform. The IOMMU groups are
> to be used later by VFIO driver (PCI pass through).
> 
> It also implements an API for mapping/unmapping pages for
> guest PCI drivers and providing DMA window properties.
> This API is going to be used later by QEMU-VFIO to handle
> h_put_tce hypercalls from the KVM guest.
> 
> Although this driver has been tested only on the POWERNV
> platform, it should work on any platform which supports
> TCE tables.
> 
> To enable VFIO on POWER, enable SPAPR_TCE_IOMMU config
> option and configure VFIO as required.
> 
> Cc: David Gibson <david@...son.dropbear.id.au>
> Signed-off-by: Alexey Kardashevskiy <aik@...abs.ru>
> ---
>  arch/powerpc/include/asm/iommu.h     |    9 ++
>  arch/powerpc/kernel/iommu.c          |  159 ++++++++++++++++++++++++++++++++++
>  arch/powerpc/platforms/powernv/pci.c |  135 +++++++++++++++++++++++++++++
>  drivers/iommu/Kconfig                |    8 ++
>  4 files changed, 311 insertions(+)
> 
> diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
> index cbfe678..5c7087a 100644
> --- a/arch/powerpc/include/asm/iommu.h
> +++ b/arch/powerpc/include/asm/iommu.h
> @@ -76,6 +76,9 @@ struct iommu_table {
>  	struct iommu_pool large_pool;
>  	struct iommu_pool pools[IOMMU_NR_POOLS];
>  	unsigned long *it_map;       /* A simple allocation bitmap for now */
> +#ifdef CONFIG_IOMMU_API
> +	struct iommu_group *it_group;
> +#endif
>  };
>  
>  struct scatterlist;
> @@ -147,5 +150,11 @@ static inline void iommu_restore(void)
>  }
>  #endif
>  
> +extern long iommu_clear_tces(struct iommu_table *tbl, unsigned long entry,
> +		unsigned long pages);
> +extern long iommu_put_tces(struct iommu_table *tbl, unsigned long entry,
> +		uint64_t tce, enum dma_data_direction direction,
> +		unsigned long pages);
> +
>  #endif /* __KERNEL__ */
>  #endif /* _ASM_IOMMU_H */
> diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
> index ff5a6ce..1225fbb 100644
> --- a/arch/powerpc/kernel/iommu.c
> +++ b/arch/powerpc/kernel/iommu.c
> @@ -44,6 +44,7 @@
>  #include <asm/kdump.h>
>  #include <asm/fadump.h>
>  #include <asm/vio.h>
> +#include <asm/tce.h>
>  
>  #define DBG(...)
>  
> @@ -856,3 +857,161 @@ void iommu_free_coherent(struct iommu_table *tbl, size_t size,
>  		free_pages((unsigned long)vaddr, get_order(size));
>  	}
>  }
> +
> +#ifdef CONFIG_IOMMU_API
> +/*
> + * SPAPR TCE API
> + */
> +static void tce_flush(struct iommu_table *tbl)
> +{
> +	/* Flush/invalidate TLB caches if necessary */
> +	if (ppc_md.tce_flush)
> +		ppc_md.tce_flush(tbl);
> +
> +	/* Make sure updates are seen by hardware */
> +	mb();
> +}
> +
> +/*
> + * iommu_clear_tces clears tces and returned the number of pages
> + * which it called put_page() on.
> + */
> +static long clear_tces_nolock(struct iommu_table *tbl, unsigned long entry,
> +		unsigned long pages)
> +{
> +	int i, retpages = 0;
> +	unsigned long oldtce;
> +	struct page *page;
> +
> +	for (i = 0; i < pages; ++i) {
> +		oldtce = ppc_md.tce_get(tbl, entry + i);
> +		ppc_md.tce_free(tbl, entry + i, 1);
> +
> +		if (!(oldtce & (TCE_PCI_WRITE | TCE_PCI_READ)))
> +			continue;
> +
> +		page = pfn_to_page(oldtce >> PAGE_SHIFT);
> +
> +		WARN_ON(!page);
> +		if (!page)
> +			continue;
> +
> +		if (oldtce & TCE_PCI_WRITE)
> +			SetPageDirty(page);
> +
> +		if (!(oldtce & ~PAGE_MASK))
> +			++retpages;

I'm confused, it looks like you're trying to only increment the counter
for tce pages aligned at the start of a page, but don't we need to mask
out the read/write and valid bits?  Trickiness like this demands a
comment.

> +
> +		put_page(page);
> +	}
> +
> +	return retpages;
> +}
> +
> +/*
> + * iommu_clear_tces clears tces and returned the number of released pages
> + */
> +long iommu_clear_tces(struct iommu_table *tbl, unsigned long entry,
> +		unsigned long pages)
> +{
> +	int ret;
> +	struct iommu_pool *pool = get_pool(tbl, entry);
> +
> +	spin_lock(&(pool->lock));
> +	ret = clear_tces_nolock(tbl, entry, pages);
> +	tce_flush(tbl);
> +	spin_unlock(&(pool->lock));
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iommu_clear_tces);
> +
> +static int put_tce(struct iommu_table *tbl, unsigned long entry,
> +		uint64_t tce, enum dma_data_direction direction)
> +{
> +	int ret;
> +	struct page *page = NULL;
> +	unsigned long kva, offset;
> +
> +	/* Map new TCE */
> +	offset = (tce & IOMMU_PAGE_MASK) - (tce & PAGE_MASK);
> +
> +	ret = get_user_pages_fast(tce & PAGE_MASK, 1,
> +			direction != DMA_TO_DEVICE, &page);
> +	if (ret < 1) {
> +		printk(KERN_ERR "tce_vfio: get_user_pages_fast failed tce=%llx ioba=%lx ret=%d\n",
> +				tce, entry << IOMMU_PAGE_SHIFT, ret);
> +		if (!ret)
> +			ret = -EFAULT;
> +		return ret;
> +	}
> +
> +	kva = (unsigned long) page_address(page);
> +	kva += offset;
> +
> +	/* tce_build receives a virtual address */
> +	entry += tbl->it_offset; /* Offset into real TCE table */
> +	ret = ppc_md.tce_build(tbl, entry, 1, kva, direction, NULL);
> +
> +	/* tce_build() only returns non-zero for transient errors */
> +	if (unlikely(ret)) {
> +		printk(KERN_ERR "tce_vfio: tce_put failed on tce=%llx ioba=%lx kva=%lx ret=%d\n",
> +				tce, entry << IOMMU_PAGE_SHIFT, kva, ret);
> +		put_page(page);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * iommu_put_tces builds tces and returned the number of actually
> + * locked system pages
> + */
> +long iommu_put_tces(struct iommu_table *tbl, unsigned long entry,
> +		uint64_t tce, enum dma_data_direction direction,
> +		unsigned long pages)
> +{
> +	int i, ret = 0, retpages = 0;
> +	struct iommu_pool *pool = get_pool(tbl, entry);
> +
> +	BUILD_BUG_ON(PAGE_SIZE < IOMMU_PAGE_SIZE);
> +	BUG_ON(direction == DMA_NONE);
> +
> +	spin_lock(&(pool->lock));
> +
> +	/* Check if any is in use */
> +	for (i = 0; i < pages; ++i) {
> +		unsigned long oldtce = ppc_md.tce_get(tbl, entry + i);
> +		if (oldtce & (TCE_PCI_WRITE | TCE_PCI_READ)) {
> +			spin_unlock(&(pool->lock));
> +			return -EBUSY;
> +		}
> +	}
> +
> +	/* Put tces to the table */
> +	for (i = 0; (i < pages) && !ret; ++i, tce += IOMMU_PAGE_SIZE) {
> +		ret = put_tce(tbl, entry + i, tce, direction);
> +		/*
> +		 * As IOMMU page size is always 4K, the system page size
> +		 * can be 64K and there is no special tracking for IOMMU pages,
> +		 * we only do rlimit check/update for the very first
> +		 * 4K IOMMUpage within 64K system page.
> +		 */
> +		if (!(tce & ~PAGE_MASK))
> +			++retpages;

Ah, here's the comment I was looking for, though I'm still not sure
about the read/write bits.

Isn't there an exploit here that a user can lock pages beyond their
limits if they just skip mapping the first 4k of each page?  Thanks,

Alex

> +	}
> +
> +	/* If failed, release locked pages, otherwise return the number of pages */
> +	if (ret)
> +		clear_tces_nolock(tbl, entry, i);
> +	else
> +		ret = retpages;
> +
> +	tce_flush(tbl);
> +	spin_unlock(&(pool->lock));
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iommu_put_tces);
> +#endif /* CONFIG_IOMMU_API */
> diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
> index 05205cf..21250ef 100644
> --- a/arch/powerpc/platforms/powernv/pci.c
> +++ b/arch/powerpc/platforms/powernv/pci.c
> @@ -20,6 +20,7 @@
>  #include <linux/irq.h>
>  #include <linux/io.h>
>  #include <linux/msi.h>
> +#include <linux/iommu.h>
>  
>  #include <asm/sections.h>
>  #include <asm/io.h>
> @@ -613,3 +614,137 @@ void __init pnv_pci_init(void)
>  	ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs;
>  #endif
>  }
> +
> +#ifdef CONFIG_IOMMU_API
> +/*
> + * IOMMU groups support required by VFIO
> + */
> +static int add_device(struct device *dev)
> +{
> +	struct iommu_table *tbl;
> +	int ret = 0;
> +
> +	if (WARN_ON(dev->iommu_group)) {
> +		printk(KERN_WARNING "tce_vfio: device %s is already in iommu group %d, skipping\n",
> +				dev_name(dev),
> +				iommu_group_id(dev->iommu_group));
> +		return -EBUSY;
> +	}
> +
> +	tbl = get_iommu_table_base(dev);
> +	if (!tbl) {
> +		pr_debug("tce_vfio: skipping device %s with no tbl\n",
> +				dev_name(dev));
> +		return 0;
> +	}
> +
> +	pr_debug("tce_vfio: adding %s to iommu group %d\n",
> +			dev_name(dev), iommu_group_id(tbl->it_group));
> +
> +	ret = iommu_group_add_device(tbl->it_group, dev);
> +	if (ret < 0)
> +		printk(KERN_ERR "tce_vfio: %s has not been added, ret=%d\n",
> +				dev_name(dev), ret);
> +
> +	return ret;
> +}
> +
> +static void del_device(struct device *dev)
> +{
> +	iommu_group_remove_device(dev);
> +}
> +
> +static int iommu_bus_notifier(struct notifier_block *nb,
> +			      unsigned long action, void *data)
> +{
> +	struct device *dev = data;
> +
> +	switch (action) {
> +	case BUS_NOTIFY_ADD_DEVICE:
> +		return add_device(dev);
> +	case BUS_NOTIFY_DEL_DEVICE:
> +		del_device(dev);
> +		return 0;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static struct notifier_block tce_iommu_bus_nb = {
> +	.notifier_call = iommu_bus_notifier,
> +};
> +
> +static void group_release(void *iommu_data)
> +{
> +	struct iommu_table *tbl = iommu_data;
> +	tbl->it_group = NULL;
> +}
> +
> +static int __init tce_iommu_init(void)
> +{
> +	struct pci_dev *pdev = NULL;
> +	struct iommu_table *tbl;
> +	struct iommu_group *grp;
> +
> +	/* Allocate and initialize IOMMU groups */
> +	for_each_pci_dev(pdev) {
> +		tbl = get_iommu_table_base(&pdev->dev);
> +		if (!tbl)
> +			continue;
> +
> +		/* Skip already initialized */
> +		if (tbl->it_group)
> +			continue;
> +
> +		grp = iommu_group_alloc();
> +		if (IS_ERR(grp)) {
> +			printk(KERN_INFO "tce_vfio: cannot create "
> +					"new IOMMU group, ret=%ld\n",
> +					PTR_ERR(grp));
> +			return PTR_ERR(grp);
> +		}
> +		tbl->it_group = grp;
> +		iommu_group_set_iommudata(grp, tbl, group_release);
> +	}
> +
> +	bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb);
> +
> +	/* Add PCI devices to VFIO groups */
> +	for_each_pci_dev(pdev)
> +		add_device(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +static void __exit tce_iommu_cleanup(void)
> +{
> +	struct pci_dev *pdev = NULL;
> +	struct iommu_table *tbl;
> +	struct iommu_group *grp = NULL;
> +
> +	bus_unregister_notifier(&pci_bus_type, &tce_iommu_bus_nb);
> +
> +	/* Delete PCI devices from VFIO groups */
> +	for_each_pci_dev(pdev)
> +		del_device(&pdev->dev);
> +
> +	/* Release VFIO groups */
> +	for_each_pci_dev(pdev) {
> +		tbl = get_iommu_table_base(&pdev->dev);
> +		if (!tbl)
> +			continue;
> +		grp = tbl->it_group;
> +
> +		/* Skip (already) uninitialized */
> +		if (!grp)
> +			continue;
> +
> +		/* Do actual release, group_release() is expected to work */
> +		iommu_group_put(grp);
> +		BUG_ON(tbl->it_group);
> +	}
> +}
> +
> +module_init(tce_iommu_init);
> +module_exit(tce_iommu_cleanup);
> +#endif /* CONFIG_IOMMU_API */
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 9f69b56..29d11dc 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -187,4 +187,12 @@ config EXYNOS_IOMMU_DEBUG
>  
>  	  Say N unless you need kernel log message for IOMMU debugging
>  
> +config SPAPR_TCE_IOMMU
> +	bool "sPAPR TCE IOMMU Support"
> +	depends on PPC_POWERNV
> +	select IOMMU_API
> +	help
> +	  Enables bits of IOMMU API required by VFIO. The iommu_ops is
> +	  still not implemented.
> +
>  endif # IOMMU_SUPPORT



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists