linux-kernel - [PATCH V5 1/2] mfd: stmpe: Get rid of irq_invert

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <2dcd7cb4c4022fa24b5328974e4226f5aaf89419.1354199865.git.viresh.kumar@linaro.org>
Date:	Thu, 29 Nov 2012 20:10:17 +0530
From:	Viresh Kumar <viresh.kumar@...aro.org>
To:	sameo@...ux.intel.com, grant.likely@...retlab.ca,
	rabin.vincent@...ricsson.com, shiraz.hashim@...com
Cc:	devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
	spear-devel@...t.st.com, lee.jones@...aro.org,
	linus.walleij@...aro.org, Viresh Kumar <viresh.kumar@...aro.org>
Subject: [PATCH V5 1/2] mfd: stmpe: Get rid of irq_invert_polarity

Since the very first patch, stmpe core driver is using irq_invert_polarity as
part of platform data. But, nobody is actually using it in kernel till now.

Also, this is not something part of hardware specs, but is included to cater
some board mistakes or quirks.

So, better get rid of it. This is earlier discussed here:

https://lkml.org/lkml/2012/11/27/636

Acked-by: Lee Jones <lee.jones@...aro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
Nothing changed from last version.

 drivers/mfd/stmpe.c       | 7 -------
 include/linux/mfd/stmpe.h | 2 --
 2 files changed, 9 deletions(-)

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 6175aa4..34408b4 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -960,13 +960,6 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe)
 			else
 				icr |= STMPE_ICR_LSB_HIGH;
 		}
-
-		if (stmpe->pdata->irq_invert_polarity) {
-			if (id == STMPE801_ID)
-				icr ^= STMPE801_REG_SYS_CTRL_INT_HI;
-			else
-				icr ^= STMPE_ICR_LSB_HIGH;
-		}
 	}
 
 	if (stmpe->pdata->autosleep) {
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 15dac79..383ac15 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -190,7 +190,6 @@ struct stmpe_ts_platform_data {
  * @id: device id to distinguish between multiple STMPEs on the same board
  * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
  * @irq_trigger: IRQ trigger to use for the interrupt to the host
- * @irq_invert_polarity: IRQ line is connected with reversed polarity
  * @autosleep: bool to enable/disable stmpe autosleep
  * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
  * @irq_base: base IRQ number.  %STMPE_NR_IRQS irqs will be used, or
@@ -207,7 +206,6 @@ struct stmpe_platform_data {
 	unsigned int blocks;
 	int irq_base;
 	unsigned int irq_trigger;
-	bool irq_invert_polarity;
 	bool autosleep;
 	bool irq_over_gpio;
 	int irq_gpio;
-- 
1.7.12.rc2.18.g61b472e

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/