Linux version 3.7.0-rc7 (root@ps) (gcc version 4.7.2 (Debian 4.7.2-4) ) #1 SMP Fri Nov 30 23:13:52 CET 2012 Command line: root=/dev/md0 rootfstype=ext4 profile=2 ro BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc7 e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000cf239fff] usable BIOS-e820: [mem 0x00000000cf23a000-0x00000000cf27cfff] ACPI NVS BIOS-e820: [mem 0x00000000cf27d000-0x00000000cf354fff] reserved BIOS-e820: [mem 0x00000000cf355000-0x00000000cf364fff] ACPI NVS BIOS-e820: [mem 0x00000000cf365000-0x00000000cf3e0fff] reserved BIOS-e820: [mem 0x00000000cf3e1000-0x00000000cf3e6fff] ACPI data BIOS-e820: [mem 0x00000000cf3e7000-0x00000000cf3e7fff] ACPI NVS BIOS-e820: [mem 0x00000000cf3e8000-0x00000000cf3e9fff] ACPI data BIOS-e820: [mem 0x00000000cf3ea000-0x00000000cf3ebfff] ACPI NVS BIOS-e820: [mem 0x00000000cf3ec000-0x00000000cf3ecfff] reserved BIOS-e820: [mem 0x00000000cf3ed000-0x00000000cf3f0fff] ACPI NVS BIOS-e820: [mem 0x00000000cf3f1000-0x00000000cf3fffff] reserved BIOS-e820: [mem 0x00000000cf400000-0x00000000cf5fffff] usable BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffbfffff] reserved BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable NX (Execute Disable) protection: active DMI 2.4 present. DMI: /DG31PR, BIOS PRG3110H.86A.0065.2009.0421.1559 04/21/2009 e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable No AGP bridge found e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-E7FFF uncachable E8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 100000000 mask FE0000000 write-back 2 base 120000000 mask FF0000000 write-back 3 base 0CF600000 mask FFFE00000 uncachable 4 base 0CF800000 mask FFF800000 uncachable 5 base 0D0000000 mask FF0000000 uncachable 6 base 0E0000000 mask FE0000000 uncachable 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 4GB, type WB reg 1, base: 4GB, range: 512MB, type WB reg 2, base: 4608MB, range: 256MB, type WB reg 3, base: 3318MB, range: 2MB, type UC reg 4, base: 3320MB, range: 8MB, type UC reg 5, base: 3328MB, range: 256MB, type UC reg 6, base: 3584MB, range: 512MB, type UC total RAM covered: 4086M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 256MB, type WB reg 3, base: 3318MB, range: 2MB, type UC reg 4, base: 3320MB, range: 8MB, type UC reg 5, base: 4GB, range: 512MB, type WB reg 6, base: 4608MB, range: 256MB, type WB e820: update [mem 0xcf600000-0xffffffff] usable ==> reserved e820: last_pfn = 0xcf600 max_arch_pfn = 0x400000000 initial memory mapped: [mem 0x00000000-0x1fffffff] Base memory trampoline at [ffff880000099000] 99000 size 24576 init_memory_mapping: [mem 0x00000000-0xcf5fffff] [mem 0x00000000-0xcf5fffff] page 2M kernel direct mapping tables up to 0xcf5fffff @ [mem 0x1fffb000-0x1fffffff] init_memory_mapping: [mem 0x100000000-0x12fffffff] [mem 0x100000000-0x12fffffff] page 2M kernel direct mapping tables up to 0x12fffffff @ [mem 0xcf5fe000-0xcf5fffff] ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL) ACPI: XSDT 00000000cf3e8f10 00044 (v01 INTEL DG31PR 06222004 MSFT 00010013) ACPI: FACP 00000000cf3e6d90 000F4 (v04 INTEL DG31PR 06222004 MSFT 00010013) ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120913/tbfadt-394) ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xCF3EBF40/0x00000000CF3E7F40, using 32 (20120913/tbfadt-521) ACPI: DSDT 00000000cf3e1010 04BE9 (v01 INTEL DG31PR 00000000 INTL 20051117) ACPI: FACS 00000000cf3ebf40 00040 ACPI: APIC 00000000cf3e6f10 0006C (v02 INTEL DG31PR 06222004 MSFT 00010013) ACPI: HPET 00000000cf3efd10 00038 (v01 INTEL ICH7HPET 06222004 AMI. 00000001) ACPI: MCFG 00000000cf3efc10 0003C (v01 INTEL DG31PR 06222004 MSFT 00000097) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0 Zone ranges: DMA [mem 0x00010000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x12fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00010000-0x0009efff] node 0: [mem 0x00100000-0xcf239fff] node 0: [mem 0xcf400000-0xcf5fffff] node 0: [mem 0x100000000-0x12fffffff] On node 0 totalpages: 1045449 DMA zone: 64 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3913 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 828538 pages, LIFO batch:31 Normal zone: 3072 pages used for memmap Normal zone: 193536 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 40 e820: [mem 0xcf600000-0xfed1bfff] available for PCI devices setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88012fc00000 s72640 r8192 d21568 u524288 pcpu-alloc: s72640 r8192 d21568 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025987 Kernel command line: root=/dev/md0 rootfstype=ext4 profile=2 ro BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc7 kernel profiling enabled (shift: 2) PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) __ex_table already sorted, skipping sort Checking aperture... No AGP bridge found Memory: 4037360k/4980736k available (3780k kernel code, 798940k absent, 144436k reserved, 1503k data, 456k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. NR_IRQS:4352 nr_irqs:712 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 2399.873 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.74 BogoMIPS (lpj=9599492) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) process: using mwait in idle threads Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 tlb_flushall_shift: -1 Freeing SMP alternatives: 16k freed ACPI: Core revision 20120913 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel 06/17 (fam: 06, model: 17, stepping: 0a) Performance Events: 4-deep LBR, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 smpboot: Booting Node 0, Processors #1 Brought up 2 CPUs smpboot: Total of 2 processors activated (9599.49 BogoMIPS) devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000 pci 0000:00:02.0: reg 10: [mem 0xff900000-0xff97ffff] pci 0000:00:02.0: reg 14: [io 0xf140-0xf147] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] pci 0000:00:02.0: reg 1c: [mem 0xff700000-0xff7fffff] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 pci 0000:00:1b.0: reg 10: [mem 0xff980000-0xff983fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 pci 0000:00:1d.3: reg 20: [io 0xf020-0xf03f] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 10: [mem 0xff984000-0xff9843ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 00ff) pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a pci 0000:00:1f.1: reg 10: [io 0xf130-0xf137] pci 0000:00:1f.1: reg 14: [io 0xf120-0xf123] pci 0000:00:1f.1: reg 18: [io 0xf110-0xf117] pci 0000:00:1f.1: reg 1c: [io 0xf100-0xf103] pci 0000:00:1f.1: reg 20: [io 0xf0f0-0xf0ff] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f pci 0000:00:1f.2: reg 10: [io 0xf0e0-0xf0e7] pci 0000:00:1f.2: reg 14: [io 0xf0d0-0xf0d3] pci 0000:00:1f.2: reg 18: [io 0xf0c0-0xf0c7] pci 0000:00:1f.2: reg 1c: [io 0xf0b0-0xf0b3] pci 0000:00:1f.2: reg 20: [io 0xf0a0-0xf0af] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:02:06.0: [8086:1229] type 00 class 0x020000 pci 0000:02:06.0: reg 10: [mem 0xff830000-0xff830fff] pci 0000:02:06.0: reg 14: [io 0xe000-0xe03f] pci 0000:02:06.0: reg 18: [mem 0xff800000-0xff81ffff] pci 0000:02:06.0: reg 30: [mem 0xff820000-0xff82ffff pref] pci 0000:02:06.0: supports D1 D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xff800000-0xff8fffff] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized ACPI: bus type scsi registered libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xcf23a000-0xcfffffff] e820: reserve RAM buffer [mem 0xcf600000-0xcfffffff] HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x00000000 window] pnp 00:00: [mem 0xd0000000-0xffffffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfed14000-0xfed19fff] pnp 00:01: [mem 0xe0000000-0xe3ffffff] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:02: [io 0x0400-0x047f] pnp 00:02: [io 0x1180-0x119f] pnp 00:02: [io 0x0500-0x053f] pnp 00:02: [mem 0xfec00000-0xfecfffff] pnp 00:02: [mem 0xfee00000-0xfee0ffff] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] pnp 00:02: [mem 0xffb00000-0xffcfffff] pnp 00:02: [mem 0xfc800000-0xfc800fff] pnp 00:02: [mem 0xfed20000-0xfed7ffff] pnp 00:02: [mem 0xffe00000-0xffffffff] system 00:02: [io 0x0400-0x047f] has been reserved system 00:02: [io 0x1180-0x119f] has been reserved system 00:02: [io 0x0500-0x053f] has been reserved system 00:02: [mem 0xfec00000-0xfecfffff] could not be reserved system 00:02: [mem 0xfee00000-0xfee0ffff] has been reserved system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:02: [mem 0xffb00000-0xffcfffff] could not be reserved system 00:02: [mem 0xfc800000-0xfc800fff] has been reserved system 00:02: [mem 0xfed20000-0xfed7ffff] has been reserved system 00:02: [mem 0xffe00000-0xffffffff] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] pnp 00:03: [io 0x0290-0x029f] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] system 00:03: [io 0x0290-0x029f] has been reserved system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:04: [io 0x03f8-0x03ff] pnp 00:04: [irq 4] pnp 00:04: [dma 0 disabled] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:05: [dma 4] pnp 00:05: [io 0x0000-0x000f] pnp 00:05: [io 0x0081-0x0083] pnp 00:05: [io 0x0087] pnp 00:05: [io 0x0089-0x008b] pnp 00:05: [io 0x008f] pnp 00:05: [io 0x00c0-0x00df] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0061] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:08: [io 0x0010-0x001f] pnp 00:08: [io 0x0022-0x003f] pnp 00:08: [io 0x0044-0x005f] pnp 00:08: [io 0x0062-0x0063] pnp 00:08: [io 0x0065-0x006f] pnp 00:08: [io 0x0072-0x007f] pnp 00:08: [io 0x0080] pnp 00:08: [io 0x0084-0x0086] pnp 00:08: [io 0x0088] pnp 00:08: [io 0x008c-0x008e] pnp 00:08: [io 0x0090-0x009f] pnp 00:08: [io 0x00a2-0x00bf] pnp 00:08: [io 0x00e0-0x00ef] pnp 00:08: [io 0x04d0-0x04d1] system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x00f0-0x00ff] pnp 00:09: [irq 13] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:0a: [mem 0xfed00000-0xfed003ff] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:1e.0: PCI bridge to [bus 02] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xff800000-0xff8fffff] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xff800000-0xff8fffff] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xd0000000-0xffffffff] NET: Registered protocol family 2 TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0xcb23a000-0xcf239fff] (64MB) mapped at [ffff8800cb23a000-ffff8800cf239fff] squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.20) msgmni has been set to 7885 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Non-volatile memory driver v1.3 brd: module loaded loop: module loaded ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix ata2: port disabled--ignoring scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:02:06.0 eth0: addr 0xff830000, irq 21, MAC addr 00:02:b3:29:95:0b i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt w83627ehf: Found W83627DHG chip at 0x290 md: raid1 personality registered for level 1 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com oprofile: using NMI interrupt. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:06: setting system clock to 2012-11-30 22:17:26 UTC (1354313846) ata3.00: ATA-8: SAMSUNG HM251JI, 2SS00_01, max UDMA7 ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: failed to get Identify Device Data, Emask 0x1 ata4.00: ATA-8: SAMSUNG HM250JI, HS100-08, max UDMA7 ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: failed to get Identify Device Data, Emask 0x1 ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM251JI 2SS0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:0:0: [sda] Attached SCSI disk ata4.00: failed to get Identify Device Data, Emask 0x1 ata4.00: failed to get Identify Device Data, Emask 0x1 ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HM250JI HS10 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 3:0:0:0: [sdb] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 4 and added 4 devices. md: autorun ... md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md1 md: bind md: bind md: running: md/raid1:md1: active with 2 out of 2 mirrors created bitmap (2 pages) for device md1 md1: bitmap initialized from disk: read 1 pages, set 0 of 3247 bits md1: detected capacity change from 0 to 217838190592 md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: md/raid1:md0: active with 2 out of 2 mirrors created bitmap (1 pages) for device md0 md0: bitmap initialized from disk: read 1 pages, set 0 of 481 bits tsc: Refined TSC clocksource calibration: 2399.951 MHz Switching to clocksource tsc md0: detected capacity change from 0 to 32218349568 md: ... autorun DONE. md0: unknown partition table EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 9:0. devtmpfs: mounted Freeing unused kernel memory: 456k freed udevd[160]: starting version 175 microcode: CPU0 sig=0x1067a, pf=0x1, revision=0x0 microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 microcode: CPU1 sig=0x1067a, pf=0x1, revision=0x0 microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 md1: unknown partition table microcode: Microcode Update Driver: v2.00 , Peter Oruba EXT4-fs (md0): re-mounted. Opts: (null) EXT4-fs (md0): re-mounted. Opts: barrier=0 EXT4-fs (md1): barriers disabled EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: barrier=0 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready e100 0000:02:06.0 eth0: NIC Link is Up 100 Mbps Full Duplex IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready