| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1354934194-28213-1-git-send-email-vivien.didelot@savoirfairelinux.com>
Date: Fri, 7 Dec 2012 21:36:34 -0500
From: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
Grant Likely <grant.likely@...retlab.ca>,
linux-kernel@...r.kernel.org,
Jerome Oufella <jerome.oufella@...oirfairelinux.com>
Subject: [PATCH v2] gpio: add TS-5500 DIO blocks support
Technologic Systems TS-5500 provides digital I/O lines exposed through
pin blocks. On this platform, there are three of them, named DIO1, DIO2
and LCD port, that may be used as a DIO block.
The TS-5500 pin blocks are described in the product's wiki:
http://wiki.embeddedarm.com/wiki/TS-5500#Digital_I.2FO
This driver is not limited to the TS-5500 blocks. It can be extended to
support similar boards pin blocks, such as on the TS-5600.
This patch is the V2 of the previous https://lkml.org/lkml/2012/9/25/671
with corrections suggested by Linus Walleij.
Signed-off-by: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Signed-off-by: Jerome Oufella <jerome.oufella@...oirfairelinux.com>
---
drivers/gpio/Kconfig | 8 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-ts5500.c | 466 ++++++++++++++++++++++++++++++
include/linux/platform_data/gpio-ts5500.h | 27 ++
4 files changed, 502 insertions(+)
create mode 100644 drivers/gpio/gpio-ts5500.c
create mode 100644 include/linux/platform_data/gpio-ts5500.h
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 47150f5..d1e6474 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -189,6 +189,14 @@ config GPIO_STA2X11
Say yes here to support the STA2x11/ConneXt GPIO device.
The GPIO module has 128 GPIO pins with alternate functions.
+config GPIO_TS5500
+ tristate "TS-5500 DIO blocks and compatibles"
+ help
+ This driver supports Digital I/O exposed by pin blocks found on some
+ Technologic Systems platforms. It includes, but is not limited to, 3
+ blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
+ LCD port.
+
config GPIO_VT8500
bool "VIA/Wondermedia SoC GPIO Support"
depends on ARCH_VT8500
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9aeed67..e33f344 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
+obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c
new file mode 100644
index 0000000..0634cee
--- /dev/null
+++ b/drivers/gpio/gpio-ts5500.c
@@ -0,0 +1,466 @@
+/*
+ * Digital I/O driver for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ * Vivien Didelot <vivien.didelot@...oirfairelinux.com>
+ *
+ * Technologic Systems platforms have pin blocks, exposing several Digital
+ * Input/Output lines (DIO). This driver aims to support single pin blocks.
+ * In that sense, the support is not limited to the TS-5500 blocks.
+ * Actually, the following platforms have DIO support:
+ *
+ * TS-5500:
+ * Documentation: http://wiki.embeddedarm.com/wiki/TS-5500
+ * Blocks: DIO1, DIO2 and LCD port.
+ *
+ * TS-5600:
+ * Documentation: http://wiki.embeddedarm.com/wiki/TS-5600
+ * Blocks: LCD port (identical to TS-5500 LCD).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_data/gpio-ts5500.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* List of supported Technologic Systems platforms DIO blocks */
+enum ts5500_blocks { TS5500_DIO1, TS5500_DIO2, TS5500_LCD, TS5600_LCD };
+
+struct ts5500_priv {
+ const struct ts5500_dio *pinout;
+ struct gpio_chip gpio_chip;
+ spinlock_t lock;
+ bool strap;
+ u8 hwirq;
+};
+
+/*
+ * Hex 7D is used to control several blocks (e.g. DIO2 and LCD port).
+ * This flag ensures that the region has been requested by this driver.
+ */
+static bool hex7d_reserved;
+
+/*
+ * This structure is used to describe capabilities of DIO lines,
+ * such as available directions and connected interrupt (if any).
+ */
+struct ts5500_dio {
+ const u8 value_addr;
+ const u8 value_mask;
+ const u8 control_addr;
+ const u8 control_mask;
+ const bool no_input;
+ const bool no_output;
+ const u8 irq;
+};
+
+#define TS5500_DIO_IN_OUT(vaddr, vbit, caddr, cbit) \
+ { \
+ .value_addr = vaddr, \
+ .value_mask = BIT(vbit), \
+ .control_addr = caddr, \
+ .control_mask = BIT(cbit), \
+ }
+
+#define TS5500_DIO_IN(addr, bit) \
+ { \
+ .value_addr = addr, \
+ .value_mask = BIT(bit), \
+ .no_output = true, \
+ }
+
+#define TS5500_DIO_IN_IRQ(addr, bit, _irq) \
+ { \
+ .value_addr = addr, \
+ .value_mask = BIT(bit), \
+ .no_output = true, \
+ .irq = _irq, \
+ }
+
+#define TS5500_DIO_OUT(addr, bit) \
+ { \
+ .value_addr = addr, \
+ .value_mask = BIT(bit), \
+ .no_input = true, \
+ }
+
+/*
+ * Input/Output DIO lines are programmed in groups of 4. Their values are
+ * available through 4 consecutive bits in a value port, whereas the direction
+ * of these 4 lines is driven by only 1 bit in a control port.
+ */
+#define TS5500_DIO_GROUP(vaddr, vbitfrom, caddr, cbit) \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 0, caddr, cbit), \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 1, caddr, cbit), \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 2, caddr, cbit), \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 3, caddr, cbit)
+
+/*
+ * TS-5500 DIO1 block
+ *
+ * value control dir hw
+ * addr bit addr bit in out irq name pin offset
+ *
+ * 0x7b 0 0x7a 0 x x DIO1_0 1 0
+ * 0x7b 1 0x7a 0 x x DIO1_1 3 1
+ * 0x7b 2 0x7a 0 x x DIO1_2 5 2
+ * 0x7b 3 0x7a 0 x x DIO1_3 7 3
+ * 0x7b 4 0x7a 1 x x DIO1_4 9 4
+ * 0x7b 5 0x7a 1 x x DIO1_5 11 5
+ * 0x7b 6 0x7a 1 x x DIO1_6 13 6
+ * 0x7b 7 0x7a 1 x x DIO1_7 15 7
+ * 0x7c 0 0x7a 5 x x DIO1_8 4 8
+ * 0x7c 1 0x7a 5 x x DIO1_9 6 9
+ * 0x7c 2 0x7a 5 x x DIO1_10 8 10
+ * 0x7c 3 0x7a 5 x x DIO1_11 10 11
+ * 0x7c 4 x DIO1_12 12 12
+ * 0x7c 5 x 7 DIO1_13 14 13
+ */
+static const struct ts5500_dio ts5500_dio1[] = {
+ TS5500_DIO_GROUP(0x7b, 0, 0x7a, 0),
+ TS5500_DIO_GROUP(0x7b, 4, 0x7a, 1),
+ TS5500_DIO_GROUP(0x7c, 0, 0x7a, 5),
+ TS5500_DIO_IN(0x7c, 4),
+ TS5500_DIO_IN_IRQ(0x7c, 5, 7),
+};
+
+/*
+ * TS-5500 DIO2 block
+ *
+ * value control dir hw
+ * addr bit addr bit in out irq name pin offset
+ *
+ * 0x7e 0 0x7d 0 x x DIO2_0 1 0
+ * 0x7e 1 0x7d 0 x x DIO2_1 3 1
+ * 0x7e 2 0x7d 0 x x DIO2_2 5 2
+ * 0x7e 3 0x7d 0 x x DIO2_3 7 3
+ * 0x7e 4 0x7d 1 x x DIO2_4 9 4
+ * 0x7e 5 0x7d 1 x x DIO2_5 11 5
+ * 0x7e 6 0x7d 1 x x DIO2_6 13 6
+ * 0x7e 7 0x7d 1 x x DIO2_7 15 7
+ * 0x7f 0 0x7d 5 x x DIO2_8 4 8
+ * 0x7f 1 0x7d 5 x x DIO2_9 6 9
+ * 0x7f 2 0x7d 5 x x DIO2_10 8 10
+ * 0x7f 3 0x7d 5 x x DIO2_11 10 11
+ * 0x7f 4 x 6 DIO2_13 14 12
+ */
+static const struct ts5500_dio ts5500_dio2[] = {
+ TS5500_DIO_GROUP(0x7e, 0, 0x7d, 0),
+ TS5500_DIO_GROUP(0x7e, 4, 0x7d, 1),
+ TS5500_DIO_GROUP(0x7f, 0, 0x7d, 5),
+ TS5500_DIO_IN_IRQ(0x7f, 4, 6),
+};
+
+/*
+ * TS-5500 LCD port used as DIO block
+ * TS-5600 LCD port is identical
+ *
+ * value control dir hw
+ * addr bit addr bit in out irq name pin offset
+ *
+ * 0x72 0 0x7d 2 x x LCD_0 8 0
+ * 0x72 1 0x7d 2 x x LCD_1 7 1
+ * 0x72 2 0x7d 2 x x LCD_2 10 2
+ * 0x72 3 0x7d 2 x x LCD_3 9 3
+ * 0x72 4 0x7d 3 x x LCD_4 12 4
+ * 0x72 5 0x7d 3 x x LCD_5 11 5
+ * 0x72 6 0x7d 3 x x LCD_6 14 6
+ * 0x72 7 0x7d 3 x x LCD_7 13 7
+ * 0x73 0 x LCD_EN 5 8
+ * 0x73 6 x LCD_WR 6 9
+ * 0x73 7 x 1 LCD_RS 3 10
+ */
+static const struct ts5500_dio ts5500_lcd[] = {
+ TS5500_DIO_GROUP(0x72, 0, 0x7d, 2),
+ TS5500_DIO_GROUP(0x72, 4, 0x7d, 3),
+ TS5500_DIO_OUT(0x73, 0),
+ TS5500_DIO_IN(0x73, 6),
+ TS5500_DIO_IN_IRQ(0x73, 7, 1),
+};
+
+static inline struct ts5500_priv *ts5500_gc_to_priv(struct gpio_chip *chip)
+{
+ return container_of(chip, struct ts5500_priv, gpio_chip);
+}
+
+static inline void ts5500_set_mask(u8 mask, u8 addr)
+{
+ u8 val = inb(addr);
+ val |= mask;
+ outb(val, addr);
+}
+
+static inline void ts5500_clear_mask(u8 mask, u8 addr)
+{
+ u8 val = inb(addr);
+ val &= ~mask;
+ outb(val, addr);
+}
+
+static int ts5500_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+ unsigned long flags;
+
+ if (line.no_input)
+ return -ENXIO;
+
+ if (line.no_output)
+ return 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ ts5500_clear_mask(line.control_mask, line.control_addr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int ts5500_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+
+ return !!(inb(line.value_addr) & line.value_mask);
+}
+
+static int ts5500_gpio_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+ unsigned long flags;
+
+ if (line.no_output)
+ return -ENXIO;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!line.no_input)
+ ts5500_set_mask(line.control_mask, line.control_addr);
+
+ if (val)
+ ts5500_set_mask(line.value_mask, line.value_addr);
+ else
+ ts5500_clear_mask(line.value_mask, line.value_addr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static void ts5500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (val)
+ ts5500_set_mask(line.value_mask, line.value_addr);
+ else
+ ts5500_clear_mask(line.value_mask, line.value_addr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int ts5500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio *block = priv->pinout;
+ const struct ts5500_dio line = block[offset];
+
+ /* Only one pin is connected to an interrupt */
+ if (line.irq)
+ return line.irq;
+
+ /* As this pin is input-only, we may strap it to another in/out pin */
+ if (priv->strap)
+ return priv->hwirq;
+
+ return -ENXIO;
+}
+
+static int ts5500_enable_irq(struct ts5500_priv *priv)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->hwirq == 7)
+ ts5500_set_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+ else if (priv->hwirq == 6)
+ ts5500_set_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+ else if (priv->hwirq == 1)
+ ts5500_set_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+ else
+ ret = -EINVAL;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ret;
+}
+
+static void ts5500_disable_irq(struct ts5500_priv *priv)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->hwirq == 7)
+ ts5500_clear_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+ else if (priv->hwirq == 6)
+ ts5500_clear_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+ else if (priv->hwirq == 1)
+ ts5500_clear_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+ else
+ dev_err(priv->gpio_chip.dev, "invalid hwirq %d\n", priv->hwirq);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int __devinit ts5500_dio_probe(struct platform_device *pdev)
+{
+ enum ts5500_blocks block = platform_get_device_id(pdev)->driver_data;
+ struct ts5500_dio_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ const char *name = dev_name(dev);
+ struct ts5500_priv *priv;
+ struct resource *res;
+ unsigned long flags;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "missing IRQ resource\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+ priv->hwirq = res->start;
+ spin_lock_init(&priv->lock);
+
+ priv->gpio_chip.owner = THIS_MODULE;
+ priv->gpio_chip.label = name;
+ priv->gpio_chip.dev = dev;
+ priv->gpio_chip.direction_input = ts5500_gpio_input;
+ priv->gpio_chip.direction_output = ts5500_gpio_output;
+ priv->gpio_chip.get = ts5500_gpio_get;
+ priv->gpio_chip.set = ts5500_gpio_set;
+ priv->gpio_chip.to_irq = ts5500_gpio_to_irq;
+ priv->gpio_chip.base = -1;
+ if (pdata) {
+ priv->gpio_chip.base = pdata->base;
+ priv->strap = pdata->strap;
+ }
+
+ switch (block) {
+ case TS5500_DIO1:
+ priv->pinout = ts5500_dio1;
+ priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio1);
+
+ if (!devm_request_region(dev, 0x7a, 3, name)) {
+ dev_err(dev, "failed to request %s ports\n", name);
+ return -EBUSY;
+ }
+ break;
+ case TS5500_DIO2:
+ priv->pinout = ts5500_dio2;
+ priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio2);
+
+ if (!devm_request_region(dev, 0x7e, 2, name)) {
+ dev_err(dev, "failed to request %s ports\n", name);
+ return -EBUSY;
+ }
+
+ if (hex7d_reserved)
+ break;
+
+ if (!devm_request_region(dev, 0x7d, 1, name)) {
+ dev_err(dev, "failed to request %s 7D\n", name);
+ return -EBUSY;
+ }
+
+ hex7d_reserved = true;
+ break;
+ case TS5500_LCD:
+ case TS5600_LCD:
+ priv->pinout = ts5500_lcd;
+ priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_lcd);
+
+ if (!devm_request_region(dev, 0x72, 2, name)) {
+ dev_err(dev, "failed to request %s ports\n", name);
+ return -EBUSY;
+ }
+
+ if (!hex7d_reserved) {
+ if (!devm_request_region(dev, 0x7d, 1, name)) {
+ dev_err(dev, "failed to request %s 7D\n", name);
+ return -EBUSY;
+ }
+
+ hex7d_reserved = true;
+ }
+
+ /* Ensure usage of LCD port as DIO */
+ spin_lock_irqsave(&priv->lock, flags);
+ ts5500_clear_mask(BIT(4), 0x7d);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ }
+
+ ret = gpiochip_add(&priv->gpio_chip);
+ if (ret) {
+ dev_err(dev, "failed to register the gpio chip\n");
+ return ret;
+ }
+
+ ret = ts5500_enable_irq(priv);
+ if (ret) {
+ dev_err(dev, "invalid interrupt %d\n", priv->hwirq);
+ goto cleanup;
+ }
+
+ return 0;
+cleanup:
+ if (gpiochip_remove(&priv->gpio_chip))
+ dev_err(dev, "failed to remove gpio chip\n");
+ return ret;
+}
+
+static int __devexit ts5500_dio_remove(struct platform_device *pdev)
+{
+ struct ts5500_priv *priv = platform_get_drvdata(pdev);
+
+ ts5500_disable_irq(priv);
+ return gpiochip_remove(&priv->gpio_chip);
+}
+
+static struct platform_device_id ts5500_dio_ids[] = {
+ { "ts5500-dio1", TS5500_DIO1 },
+ { "ts5500-dio2", TS5500_DIO2 },
+ { "ts5500-dio-lcd", TS5500_LCD },
+ { "ts5600-dio-lcd", TS5600_LCD },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, ts5500_dio_ids);
+
+static struct platform_driver ts5500_dio_driver = {
+ .driver = {
+ .name = "ts5500-dio",
+ .owner = THIS_MODULE,
+ },
+ .probe = ts5500_dio_probe,
+ .remove = __devexit_p(ts5500_dio_remove),
+ .id_table = ts5500_dio_ids,
+};
+
+module_platform_driver(ts5500_dio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Savoir-faire Linux Inc. <kernel@...oirfairelinux.com>");
+MODULE_DESCRIPTION("Technologic Systems TS-5500 Digital I/O driver");
diff --git a/include/linux/platform_data/gpio-ts5500.h b/include/linux/platform_data/gpio-ts5500.h
new file mode 100644
index 0000000..b10d11c
--- /dev/null
+++ b/include/linux/platform_data/gpio-ts5500.h
@@ -0,0 +1,27 @@
+/*
+ * GPIO (DIO) header for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ * Vivien Didelot <vivien.didelot@...oirfairelinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PDATA_GPIO_TS5500_H
+#define _PDATA_GPIO_TS5500_H
+
+/**
+ * struct ts5500_dio_platform_data - TS-5500 pin block configuration
+ * @base: The GPIO base number to use.
+ * @strap: The only pin connected to an interrupt in a block is input-only.
+ * If you need a bidirectional line which can trigger an IRQ, you
+ * may strap it with an in/out pin. This flag indicates this case.
+ */
+struct ts5500_dio_platform_data {
+ int base;
+ bool strap;
+};
+
+#endif /* _PDATA_GPIO_TS5500_H */
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists