| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1355140012.6601.1.camel@phoenix>
Date: Mon, 10 Dec 2012 19:46:52 +0800
From: Axel Lin <axel.lin@...ics.com>
To: Mark Brown <broonie@...nsource.wolfsonmicro.com>
Cc: Marek Szyprowski <m.szyprowski@...sung.com>,
Liam Girdwood <lrg@...com>, linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] regulator: lp3971: Convert to get_voltage_sel
regulator_list_voltage_table() returns -EINVAL if selector >= n_voltages.
Thus we don't need to check if reg is greater than BUCK_TARGET_VOL_MAX_IDX in
lp3971_dcdc_get_voltage_sel.
BUCK_TARGET_VOL_MIN_IDX and BUCK_TARGET_VOL_MAX_IDX are not used, remove them.
Signed-off-by: Axel Lin <axel.lin@...ics.com>
---
drivers/regulator/lp3971.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 5f68ff1..9cb2c0f 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -73,8 +73,6 @@ static const unsigned int buck_voltage_map[] = {
};
#define BUCK_TARGET_VOL_MASK 0x3f
-#define BUCK_TARGET_VOL_MIN_IDX 0x01
-#define BUCK_TARGET_VOL_MAX_IDX 0x19
#define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2)
@@ -140,7 +138,7 @@ static int lp3971_ldo_disable(struct regulator_dev *dev)
return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0);
}
-static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
+static int lp3971_ldo_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3971_LDO1;
@@ -149,7 +147,7 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
- return dev->desc->volt_table[val];
+ return val;
}
static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -168,7 +166,7 @@ static struct regulator_ops lp3971_ldo_ops = {
.is_enabled = lp3971_ldo_is_enabled,
.enable = lp3971_ldo_enable,
.disable = lp3971_ldo_disable,
- .get_voltage = lp3971_ldo_get_voltage,
+ .get_voltage_sel = lp3971_ldo_get_voltage_sel,
.set_voltage_sel = lp3971_ldo_set_voltage_sel,
};
@@ -201,24 +199,16 @@ static int lp3971_dcdc_disable(struct regulator_dev *dev)
return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0);
}
-static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
+static int lp3971_dcdc_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3971_DCDC1;
u16 reg;
- int val;
reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck));
reg &= BUCK_TARGET_VOL_MASK;
- if (reg <= BUCK_TARGET_VOL_MAX_IDX)
- val = buck_voltage_map[reg];
- else {
- val = 0;
- dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
- }
-
- return val;
+ return reg;
}
static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
@@ -249,7 +239,7 @@ static struct regulator_ops lp3971_dcdc_ops = {
.is_enabled = lp3971_dcdc_is_enabled,
.enable = lp3971_dcdc_enable,
.disable = lp3971_dcdc_disable,
- .get_voltage = lp3971_dcdc_get_voltage,
+ .get_voltage_sel = lp3971_dcdc_get_voltage_sel,
.set_voltage_sel = lp3971_dcdc_set_voltage_sel,
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists