[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1355120784-31118-4-git-send-email-a.kesavan@samsung.com>
Date: Mon, 10 Dec 2012 11:56:24 +0530
From: Abhilash Kesavan <a.kesavan@...sung.com>
To: lrg@...com, broonie@...nsource.wolfsonmicro.com,
linux-kernel@...r.kernel.org
Cc: dianders@...omium.org, olof@...om.net, grant.likely@...retlab.ca,
thomas.abraham@...aro.org, kgene.kim@...sung.com,
sameo@...ux.intel.com, Abhilash Kesavan <a.kesavan@...sung.com>
Subject: [RFC PATCH 3/3] dt: Document: Add optional MAX77686 operating mode
bindings
Add documenatation for various operating mode capabilities of
the MAX77686 PMIC.
Signed-off-by: Abhilash Kesavan <a.kesavan@...sung.com>
---
Documentation/devicetree/bindings/mfd/max77686.txt | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index c6a3469..f2867a9 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -13,6 +13,12 @@ Required properties:
- interrupts : This i2c device has an IRQ line connected to the main SoC.
- interrupt-parent : The parent interrupt controller.
+optional properties:
+- max77686-opmode : The regulators of max77686 have various operating mode
+ capabilities such as low power mode, standby mode (controlled by PWRREQ
+ signal) etc. Check the regulator CTRL register for the bits setting these
+ modes.
+
Optional node:
- voltage-regulators : The regulators of max77686 have to be instantiated
under subnode named "voltage-regulators" using the following format.
--
1.7.8.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists