| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1355404930-5691-7-git-send-email-lee.jones@linaro.org> Date: Thu, 13 Dec 2012 13:22:08 +0000 From: Lee Jones <lee.jones@...aro.org> To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org Cc: arnd@...db.de, linus.walleij@...ricsson.com, ulf.hansson@...aro.org, Lee Jones <lee.jones@...aro.org> Subject: [PATCH 6/8] ARM: ux500: Setup correct settling time for the MMCI regulator The GPIO controlled MMCI regulator used on the ux5x0 boards takes 100us to settle. There's already a binding to provide such information. Let's make use of it. Acked-by: Linus Walleij <linus.walleij@...aro.org> Signed-off-by: Lee Jones <lee.jones@...aro.org> --- arch/arm/boot/dts/dbx5x0.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 88f90217..208fe8b 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -638,6 +638,7 @@ regulator-name = "mmci-reg"; regulator-type = "voltage"; + startup-delay-us = <100>; enable-active-high; states = <1800000 0x1 -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists