| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1355404930-5691-4-git-send-email-lee.jones@linaro.org> Date: Thu, 13 Dec 2012 13:22:05 +0000 From: Lee Jones <lee.jones@...aro.org> To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org Cc: arnd@...db.de, linus.walleij@...ricsson.com, ulf.hansson@...aro.org, Lee Jones <lee.jones@...aro.org> Subject: [PATCH 3/8] ARM: ux500: Specify the ux5x0 MMCI regulator's on/off GPIO as high-enable If not specified, the GPIO control bit is inverted by default i.e. low-enable and high-disable. This is not the case with the MMCI regulator, hence it will turn on during a disable and off when regulator_enable() is invoked. Acked-by: Linus Walleij <linus.walleij@...aro.org> Signed-off-by: Lee Jones <lee.jones@...aro.org> --- arch/arm/boot/dts/dbx5x0.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 6b1aa6d..88f90217 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -638,6 +638,8 @@ regulator-name = "mmci-reg"; regulator-type = "voltage"; + enable-active-high; + states = <1800000 0x1 2900000 0x0>; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists