| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20121213015638.GA28281@quad.lixom.net>
Date: Wed, 12 Dec 2012 17:56:38 -0800
From: Olof Johansson <olof@...om.net>
To: torvalds@...ux-foundation.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
arm@...nel.org
Subject: [GIT PULL 1/5] ARM: arm-soc: device tree conversions and enablement
Continued device tree conversion and enablement across a number of
platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
smaller series as well.
ux500 has seen continued conversion for platforms. Several platforms have
seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra
is adding data for new devices/drivers, and Exynos has a bunch of new
bindings and devices added as well.
So, pretty much the same progression in the right direction as the last
few releases.
Conflicts seen with this merge:
arch/arm/Kconfig:
Add/add. Keep both.
arch/arm/boot/dts/Makefile:
For the exynos entries, add 4412-smdk and 5250-snow to the HEAD version.
For highbank, keep the new version with two entries.
arch/arm/boot/dts/at91sam9263.dtsi:
arch/arm/boot/dts/at91sam9g45.dtsi:
arch/arm/boot/dts/dbx5x0.dtsi:
arch/arm/boot/dts/imx51.dtsi:
Add/add. Keep both and terminate properly
arch/arm/boot/dts/imx6q.dtsi:
Keep the name with the prefix from the branch, but the new properties
from HEAD.
arch/arm/boot/dts/snowball.dts:
arch/arm/mach-exynos/mach-exynos4-dt.c:
Add/add. Keep both
arch/arm/mach-kirkwood/board-lsxl.c
Take out linux/gpio.h include.
arch/arm/mach-ux500/cpu-db8500.c:
Keep linux/random.h from HEAD version, take out plat/gpio-nomadik.h from the
branch version but keep the rest from there.
Remove the cpufreq platform device registration.
drivers/clk/Makefile:
Add/add. Keep both.
drivers/usb/host/ehci-orion.c:
__dev* removal conflict. Keep branch version, remove annotation.
----------------------------------------------------------------
The following changes since commit cf4af01221579a4e895f43dbfc47598fbfc5a731:
Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/dt
for you to fetch changes up to 64507dd7028e3e0145077e73b8374bd75aea117c:
Merge branch 'ste-dt-for-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt
----------------------------------------------------------------
Alban Bedel (1):
ARM: LPC32xx: Add the motor PWM to base dts file
Amit Daniel Kachhap (2):
ARM: EXYNOS: Add devicetree node for TMU driver for exynos4
ARM: EXYNOS: Add devicetree node for TMU driver for exynos5
Andrew Lunn (21):
ARM: Kirkwood: ehci-orion: Add device tree binding
ARM: Kirkwood: Convert all DT boards to EHCI via DT.
ARM: Kirkwood: Convert DNSKW to use gpio-poweroff.
ARM: Kirkwood: Convert IB62x0 to use gpio-poweroff.
ARM: Kirkwood: Enable regulator and fixed regulators.
ARM: Kirkwood: Convert DNSKW to use regulators
ARM: Kirkwood: Convert Dockstar to use regulators
ARM: Kirkwood: Convert GoFlexNet to use regulators
ARM: Kirkwood: Convert LSXL to use regulators
GPIO: mvebu: Allow all plat-orion platforms.
ARM: Kirkwood: Make use of mvebu pincltl and gpio drivers
ARM: Kirkwood: Add DTSI files for pinctrl
ARM: Kirkwood: Convert TS219 to pinctrl.
ARM: Kirkwood: Convert iConnect to pinctrl.
ARM: Kirkwood: Convert dnskw to pinctrl
ARM: Kirkwood: Convert dockstar to pinctrl.
ARM: Kirkwood: Convert dreamplug to pinctrl.
ARM: Kirkwood: Convert GoFlex Net to pinctrl.
ARM: Kirkwood: Convert ib62x0 to pinctrl.
ARM: Kirkwood: Convert lsxl boards to pinctrl.
ARM: Kirkwood: Convert IX2-200 to pinctrl.
Arnd Bergmann (8):
Merge branch 'omap/headers4' into next/dt
Merge tag 'omap-for-v3.8/dt-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/dt From Tony Lindgren <tony@...mide.com>:
Merge branch 'omap/cleanup-prcm-part2' into next/dt
Merge tag 'imx-dt' of git://git.pengutronix.de/git/imx/linux-2.6 into next/dt
Merge branch 'arm-next' of git://git.xilinx.com/linux-xlnx into next/dt
Merge tag 'mxs-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
Merge tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
Merge branch 'ste-dt-for-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt
Arun Kumar K (1):
ARM: EXYNOS: Add MFC device tree support
Axel Lin (1):
pinctrl: mvebu: Fix dove_audio1_ctrl_set function
Doug Anderson (3):
ARM: dts: Move the dwmmc aliases from smdk5250 dts to exynos
ARM: dts: Add board dts file for Snow board (ARM Chromebook)
ARM: dts: Add aliases for i2c controller for exynos4
Fabio Baltieri (1):
ARM: dts: add missing ux500 device trees
Fabio Estevam (7):
ARM: dts: imx28-evk: Use pinctrl for gpio-led
ARM: dts: imx23-olinuxino: Remove unneeded "default-on"
ARM: dts: imx23-olinuxino: Use pinctrl for gpio-led
ARM: dts: imx53-qsb: Use pinctrl for gpio-led
ARM: dts: imx53-qsb: Make DA9053 regulator functional
ARM: dts: imx6q-sabreauto: Add basic support
ARM: mxs_defconfig: Improve USB related support
Fabio Porcedda (4):
ARM: at91: dt: evk-pro3: enable uart0 and uart2
watchdog: at91sam9_wdt: add device tree support
ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45
ARM: at91/dts: evk-pro3: enable watchdog
Fadil Berisha (1):
ARM: imx23-olinuxino: Add spi support
Gwenhael Goavec-Merou (5):
ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board
ARM: dts: mxs: Add 16 bits LCD screen muxing options for I.MX28
ARM: mxs: apf28dev: Add pinctrl and gpios
ARM: mxs: apf28dev: Add LCD and backlight support
ARM: mxs: apf28dev: Add I2C and SPI support
Jamie Lentin (2):
ARM: kirkwood: Increase NAND chip-delay for DNS-32[05]
power: Add simple poweroff-gpio driver
Jason Cooper (2):
Merge commit '06763c7' into orion/dt2
ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
Josh Cartwright (6):
ARM: zynq: move arm-specific sys_timer out of ttc
ARM: zynq: dts: add description of the second uart
ARM: zynq: dts: split up device tree
clk: Add support for fundamental zynq clks
ARM: zynq: use zynq clk bindings
ARM: zynq: add clk binding support to the ttc
Julien Boibessot (2):
ARM: mxs: Add support for the Armadeus Systems APF28 module
ARM: dts: mxs: Add PWM3 muxing options for i.MX28
Kukjin Kim (2):
Merge branch 'next/pinctrl-samsung' into next/dt-exynos4x12
Merge branch 'next/dt-exynos4x12' into next/dt-samsung
Laxman Dewangan (3):
ARM: tegra: dts: add slink controller dt entry
ARM: tegra: dts: cardhu: enable SLINK4
ARM: tegra: dts: add sflash controller dt entry
Lee Jones (42):
ARM: ux500: Move regulator-name properties out to board DTS files
ARM: ux500: Fix initialisation order for UIBs
ARM: ux500: Elaborate on SDI device node names in Device Tree
ARM: ux500: Add SDI (MMC) support to the HREF Device Tree
ARM: ux500: Correct Snowball's external SD/MMC slot's bus width
ARM: ux500: Create a DTS hierarchy for ST-Ericsson's HREF boards
ARM: ux500: Create a Device Tree for early HREFs
ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF
ARM: ux500: Remove platform specific device registration when DT is enabled
ARM: ux500: Move all Device Tree booting into cpu-db8500
ARM: ux500: Strip out duplicate touch screen platform information
Documentation: Detail permitted DT properties for the BU21013 Touch Screen
ARM: ux500: Create a new Device Tree include file for boards supporting STUIBs
ARM: ux500: Stop calling the UIB init function when using Device Tree
ARM: ux500: Add all bu21013 touch screen components to supported Device Trees
ARM: ux500: Stop informing the regulator subsystem that we have full constraints
ARM: ux500: Apply a Device Tree node for the STMPE MFD
ARM: ux500: Supply the STMPE keypad Device Tree node to the STUIB DT
ARM: ux500: Remove unused board compatible string
ARM: ux500: Add skeleton DTS file for the u9540
ARM: ux500: Add support for ST-Ericsson's u9540 SoC
ARM: ux500: Add UART support to the u9540 Device Tree
ARM: ux500: Enable SDI4 port on the u9540 when booting with Device Tree
ARM: ux500: Enable all MMC devices on the u9540 when booting with DT
ARM: ux500: Rename references to the ccu9540 dev board accordingly
ARM: ux500: Remove duplicate DT_MACHINE_START - make u8500 for generic
ARM: ux500: List DT compatibility using platform names rather than by board
ARM: ux500: Add node for the MMC GPIO regulator
ARM: ux500: Change the type of interrupt to something compatible
ARM: ux500: CONFIG: Enable GPIO Regulators
ARM: ux500: Convert DT_MACHINE_START to use SMP operations
ARM: ux500: Move regulator-name properties out to board DTS files
ARM: ux500: Add SDI (MMC) support to the HREF Device Tree
ARM: ux500: Add skeleton DTS file for the u9540
ARM: ux500: Add UART support to the u9540 Device Tree
ARM: ux500: Enable SDI4 port on the u9540 when booting with Device Tree
ARM: ux500: Enable all MMC devices on the u9540 when booting with DT
ARM: ux500: Describe UART platform registering issues more accurately
ARM: ux500: Disable the MMCI gpio-regulator by default
ARM: ux500: Move board specific GPIO info out to subordinate DTS files
ARM: ux500: Stop registering the PCM driver from platform code
ARM: ux500: Rename dbx500 cpufreq code to be more generic
Liu Ying (1):
ARM: dts: imx6q-sabresd: add volume up/down gpio keys
Marek Vasut (2):
ARM: mx28: Skip OCOTP FEC MAC setup if in DT
ARM: mxs: Add SchulerControl SPS1 DTS file
Mark Zhang (1):
ARM: dt: tegra: ventana: define pinmux for ddc
Maxime Ripard (5):
ARM: dts: cfa10049: Add FEC to the CFA-10049 expansion board
ARM: dts: cfa10049: Add the DH2228FV DAC to the DTS
ARM: dts: cfa10036: Use pinctrl for power led
ARM: dts: mxs: Add hog pins to Crystalfontz boards
ARM: dts: mxs: add oled support for the cfa-10036
Nick Bowler (1):
ARM: zynq: Allow UART1 to be used as DEBUG_LL console.
Nobuhiro Iwamatsu (5):
ARM: kirkwood: Add support DT of second I2C bus
ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
ARM: Kirkwood: Add support LED of OpenBlocks A6
Olof Johansson (15):
Merge branch 'ste-dt-for-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt
Merge tag 'davinci-for-v3.8/dt' of git://gitorious.org/linux-davinci/linux-davinci into next/dt
ARM: davinci: move dtb targets to common location
Merge tag 'at91-for-next-dt' of git://github.com/at91linux/linux-at91 into next/dt
Merge tag 'tegra-for-3.8-dt' of git://git.kernel.org/.../swarren/linux-tegra into next/dt
Merge tag 'lpc32xx-dts-for-3.7' of git://git.antcom.de/linux-2.6 into next/dt
Merge branch 'ste-dt-for-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt
ARM: EXYNOS: add all i2c busses to auxdata for DT
Merge branch 'next/hdmi-samsung' of git://git.kernel.org/.../kgene/linux-samsung into next/dt
Merge branch 'next/dt-samsung' of git://git.kernel.org/.../kgene/linux-samsung into next/dt
Merge tag 'mxs-dt-3.8-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
Merge branch 'next/dt-samsung-2' of git://git.kernel.org/.../kgene/linux-samsung into next/dt
Merge tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux into next/dt
Merge branch 'orion/cleanup' into orion/dt
Merge branch 'orion/dt' into next/dt
Philippe Reynes (1):
Add device tree file for the armadeus apf27
Rahul Sharma (6):
ARM: dts: add device tree support for exynos5 hdmi
ARM: dts: add device tree support for exynos5 mixer
ARM: dts: add device tree support for exynos5 hdmiphy
ARM: dts: add device tree support for exynos5 hdmiddc
ARM: EXYNOS: add clocks for exynos5 hdmi
ARM: EXYNOS: removing exynos-drm device registration from non-dt platforms
Roland Stigge (1):
ARM: dts: imx53: pinctl update
Sascha Hauer (7):
Merge remote-tracking branch 'arm-soc/imx/multiplatform' into imx25-dt
ARM i.MX25: Add missing clock gates
ARM i.MX25: Add devicetree support
ARM i.MX25: Add devicetree
ARM i.MX: Add Ka-Ro TX25 devicetree
ARM i.MX dtsi: Add default bus-width property for esdhc controller
ARM i.MX dts: Consistently add labels to devicenodes
Sebastian Hesselbarth (3):
pinctrl: mvebu: fix iomem pointer for dove pinctrl
ARM: Dove: Convert to DT GPIO and pinctrl
ARM: Dove: Add CuBox pinhog for led
Shawn Guo (5):
ARM: imx6q: let users input debug uart port number
ARM: dts: imx6q: enable snvs lp rtc
ARM: imx: enable cpufreq for imx6q
ARM: imx6q: print silicon version on boot
ARM: imx6q: select ARM and PL310 errata
Stanislav Meduna (1):
ARM: mxs: Setup scheduler clock
Stefan Peter (1):
ARM: kirkwood: Convert mplcec4 board to pinctrl
Stephen Warren (3):
ARM: tegra: trimslice: enable SPI flash
ARM: tegra: harmony: enable HDMI port
ARM: tegra: whistler: enable HDMI port
Thierry Reding (11):
ARM: tegra: tamonten: Add DDC/PTA pinmux
ARM: tegra: tec: Remove redundant DT properties
ARM: tegra: harmony: Add ADT7641 temperature sensor
ARM: tegra: tamonten: Add NCT1008 temperature sensor
ARM: tegra: ventana: Add NCT1008 temperature sensor
ARM: tegra: Add Tegra20 host1x support
ARM: tegra: Add Tegra30 host1x support
ARM: tegra: trimslice: enable HDMI port
ARM: tegra: tamonten: Add host1x support
ARM: tegra: plutux: Enable HDMI output
ARM: tegra: tec: Enable HDMI output
Thomas Abraham (1):
ARM: dts: add board dts file for EXYNOS4412 based SMDK board
Tomasz Figa (20):
ARM: dts: Enable serial controllers on Origen and SMDKV310
ARM: dts: Add support for EXYNOS4X12 SoCs
ARM: EXYNOS: Skip wakeup-int setup if pinctrl driver is used on EXYNOS4X12
gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12
ARM: dts: Add nodes for pin controllers for exynos4x12
ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats
ARM: dts: Add nodes for GPIO keys available on Trats
ARM: dts: Add node for i2c3 bus for exynos4210-trats
ARM: dts: Add node for touchscreen voltage regulator for exynos4210-trats
ARM: dts: Add node for touchscreen for exynos4210-trats
ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats
ARM: dts: Split memory sections for exynos4210-origen
ARM: dts: Update for pinctrl-samsung driver for exynos4210-origen
ARM: dts: Update sdhci nodes for current bindings for exynos4210-origen
ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origen
ARM: EXYNOS: Detect power domain state on registration from DT
ARM: EXYNOS: Fix power domain name initialization
ARM: EXYNOS: Bind devices to power domains using DT
ARM: dts: Set up power domains for exynos4
ARM: dts: Use drive strength 3 for SD pins for exynos4
Valentin Longchamp (2):
ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
ARM: Kirkwood: Convert km_kirkwood to pinctrl
Vasanth Ananthan (1):
ARM: EXYNOS: DT Support for SATA and SATA PHY
Wei Ni (3):
ARM: dt: t20 seaboard: turn on the power for wlan
ARM: dt: t20 ventana: set pinmux and power for wlan
ARM: dt: t30 cardhu: set pinmux and power for wlan
.../bindings/arm/exynos/power_domain.txt | 15 +-
Documentation/devicetree/bindings/arm/fsl.txt | 4 +
.../devicetree/bindings/ata/exynos-sata-phy.txt | 14 +
.../devicetree/bindings/ata/exynos-sata.txt | 17 +
.../devicetree/bindings/clock/imx25-clock.txt | 162 ++++
.../devicetree/bindings/clock/zynq-7000.txt | 55 ++
.../devicetree/bindings/drm/exynos/hdmi.txt | 22 +
.../devicetree/bindings/drm/exynos/hdmiddc.txt | 12 +
.../devicetree/bindings/drm/exynos/hdmiphy.txt | 12 +
.../devicetree/bindings/drm/exynos/mixer.txt | 15 +
.../devicetree/bindings/gpio/gpio-poweroff.txt | 22 +
.../bindings/input/touchscreen/bu21013.txt | 28 +
.../devicetree/bindings/media/s5p-mfc.txt | 23 +
.../pinctrl/marvell,kirkwood-pinctrl.txt | 39 +
.../devicetree/bindings/usb/ehci-orion.txt | 15 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
.../devicetree/bindings/watchdog/atmel-wdt.txt | 15 +
arch/arm/Kconfig | 6 +
arch/arm/Kconfig.debug | 43 +-
arch/arm/boot/dts/Makefile | 14 +-
arch/arm/boot/dts/at91sam9260.dtsi | 6 +
arch/arm/boot/dts/at91sam9263.dtsi | 5 +
arch/arm/boot/dts/at91sam9g45.dtsi | 5 +
arch/arm/boot/dts/ccu9540.dts | 72 ++
arch/arm/boot/dts/cros5250-common.dtsi | 184 ++++
arch/arm/boot/dts/dbx5x0.dtsi | 56 +-
arch/arm/boot/dts/dove-cubox.dts | 10 +
arch/arm/boot/dts/dove.dtsi | 19 +-
arch/arm/boot/dts/evk-pro3.dts | 12 +
arch/arm/boot/dts/exynos4.dtsi | 54 +-
arch/arm/boot/dts/exynos4210-origen.dts | 70 +-
arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 56 +-
arch/arm/boot/dts/exynos4210-smdkv310.dts | 16 +
arch/arm/boot/dts/exynos4210-trats.dts | 87 +-
arch/arm/boot/dts/exynos4210.dtsi | 12 +
arch/arm/boot/dts/exynos4212.dtsi | 28 +
arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 +
arch/arm/boot/dts/exynos4412.dtsi | 28 +
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 965 +++++++++++++++++++
arch/arm/boot/dts/exynos4x12.dtsi | 69 ++
arch/arm/boot/dts/exynos5250-smdk5250.dts | 56 +-
arch/arm/boot/dts/exynos5250-snow.dts | 43 +
arch/arm/boot/dts/exynos5250.dtsi | 62 +-
arch/arm/boot/dts/href.dtsi | 273 ++++++
arch/arm/boot/dts/hrefprev60.dts | 48 +
arch/arm/boot/dts/hrefv60plus.dts | 217 ++++-
arch/arm/boot/dts/imx23-olinuxino.dts | 23 +-
arch/arm/boot/dts/imx23.dtsi | 13 +
arch/arm/boot/dts/imx25-karo-tx25.dts | 44 +
arch/arm/boot/dts/imx25.dtsi | 515 ++++++++++
arch/arm/boot/dts/imx27-apf27.dts | 89 ++
arch/arm/boot/dts/imx27.dtsi | 5 +-
arch/arm/boot/dts/imx28-apf28.dts | 85 ++
arch/arm/boot/dts/imx28-apf28dev.dts | 154 +++
arch/arm/boot/dts/imx28-cfa10036.dts | 46 +
arch/arm/boot/dts/imx28-cfa10049.dts | 33 +
arch/arm/boot/dts/imx28-evk.dts | 13 +-
arch/arm/boot/dts/imx28-sps1.dts | 169 ++++
arch/arm/boot/dts/imx28.dtsi | 35 +
arch/arm/boot/dts/imx51.dtsi | 43 +-
arch/arm/boot/dts/imx53-qsb.dts | 62 +-
arch/arm/boot/dts/imx53.dtsi | 92 +-
arch/arm/boot/dts/imx6q-sabreauto.dts | 64 ++
arch/arm/boot/dts/imx6q-sabresd.dts | 18 +
arch/arm/boot/dts/imx6q.dtsi | 114 ++-
arch/arm/boot/dts/kirkwood-6281.dtsi | 44 +
arch/arm/boot/dts/kirkwood-6282.dtsi | 45 +
arch/arm/boot/dts/kirkwood-98dx4122.dtsi | 31 +
arch/arm/boot/dts/kirkwood-dnskw.dtsi | 140 +++
arch/arm/boot/dts/kirkwood-dockstar.dts | 37 +
arch/arm/boot/dts/kirkwood-dreamplug.dts | 21 +
arch/arm/boot/dts/kirkwood-goflexnet.dts | 73 ++
arch/arm/boot/dts/kirkwood-ib62x0.dts | 40 +
arch/arm/boot/dts/kirkwood-iconnect.dts | 51 +
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 89 ++
arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 17 +
arch/arm/boot/dts/kirkwood-lsxl.dtsi | 95 ++
arch/arm/boot/dts/kirkwood-mplcec4.dts | 59 ++
arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 59 ++
arch/arm/boot/dts/kirkwood-ts219-6281.dts | 31 +
arch/arm/boot/dts/kirkwood-ts219-6282.dts | 31 +
arch/arm/boot/dts/kirkwood.dtsi | 17 +-
arch/arm/boot/dts/lpc32xx.dtsi | 7 +
arch/arm/boot/dts/snowball.dts | 140 ++-
arch/arm/boot/dts/stuib.dtsi | 78 ++
arch/arm/boot/dts/tegra20-harmony.dts | 25 +-
arch/arm/boot/dts/tegra20-plutux.dts | 6 +
arch/arm/boot/dts/tegra20-seaboard.dts | 6 +
arch/arm/boot/dts/tegra20-tamonten.dtsi | 88 +-
arch/arm/boot/dts/tegra20-tec.dts | 9 +-
arch/arm/boot/dts/tegra20-trimslice.dts | 54 +-
arch/arm/boot/dts/tegra20-ventana.dts | 90 +-
arch/arm/boot/dts/tegra20-whistler.dts | 21 +-
arch/arm/boot/dts/tegra20.dtsi | 137 +++
arch/arm/boot/dts/tegra30-cardhu-a02.dts | 6 +
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 6 +
arch/arm/boot/dts/tegra30-cardhu.dtsi | 37 +
arch/arm/boot/dts/tegra30.dtsi | 147 +++
arch/arm/boot/dts/u9540.dts | 72 ++
arch/arm/boot/dts/zynq-7000.dtsi | 166 ++++
arch/arm/boot/dts/zynq-ep107.dts | 63 --
arch/arm/boot/dts/zynq-zc702.dts | 44 +
arch/arm/configs/mxs_defconfig | 6 +
arch/arm/configs/u8500_defconfig | 1 +
arch/arm/include/debug/imx.S | 20 +-
arch/arm/mach-davinci/Makefile.boot | 2 -
arch/arm/mach-exynos/Kconfig | 1 +
arch/arm/mach-exynos/Makefile | 1 -
arch/arm/mach-exynos/clock-exynos4.c | 4 +
arch/arm/mach-exynos/clock-exynos5.c | 21 +-
arch/arm/mach-exynos/common.c | 7 +-
arch/arm/mach-exynos/dev-drm.c | 29 -
arch/arm/mach-exynos/include/mach/irqs.h | 3 +
arch/arm/mach-exynos/include/mach/map.h | 2 +
arch/arm/mach-exynos/mach-exynos4-dt.c | 4 +
arch/arm/mach-exynos/mach-exynos5-dt.c | 42 +
arch/arm/mach-exynos/mach-nuri.c | 3 -
arch/arm/mach-exynos/mach-origen.c | 3 -
arch/arm/mach-exynos/mach-smdk4x12.c | 3 -
arch/arm/mach-exynos/mach-smdkv310.c | 3 -
arch/arm/mach-exynos/mach-universal_c210.c | 3 -
arch/arm/mach-exynos/pm_domains.c | 93 +-
arch/arm/mach-imx/Kconfig | 18 +
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/clk-imx25.c | 119 ++-
arch/arm/mach-imx/clk-imx6q.c | 1 +
arch/arm/mach-imx/common.h | 1 +
arch/arm/mach-imx/imx25-dt.c | 48 +
arch/arm/mach-imx/lluart.c | 28 +-
arch/arm/mach-imx/mach-imx6q.c | 35 +
arch/arm/mach-imx/mx6q.h | 4 -
arch/arm/mach-kirkwood/Kconfig | 5 +
arch/arm/mach-kirkwood/board-dnskw.c | 54 --
arch/arm/mach-kirkwood/board-dockstar.c | 16 -
arch/arm/mach-kirkwood/board-dreamplug.c | 15 -
arch/arm/mach-kirkwood/board-goflexnet.c | 24 -
arch/arm/mach-kirkwood/board-ib62x0.c | 35 -
arch/arm/mach-kirkwood/board-iconnect.c | 18 -
arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 26 -
arch/arm/mach-kirkwood/board-km_kirkwood.c | 13 -
arch/arm/mach-kirkwood/board-lsxl.c | 28 -
arch/arm/mach-kirkwood/board-mplcec4.c | 36 -
arch/arm/mach-kirkwood/board-ns2.c | 1 -
arch/arm/mach-kirkwood/board-nsa310.c | 4 -
arch/arm/mach-kirkwood/board-openblocks_a6.c | 5 +-
arch/arm/mach-kirkwood/board-ts219.c | 26 -
arch/arm/mach-kirkwood/board-usi_topkick.c | 1 -
arch/arm/mach-mxs/mach-mxs.c | 56 ++
arch/arm/mach-mxs/timer.c | 10 +-
arch/arm/mach-ux500/board-mop500-audio.c | 16 -
arch/arm/mach-ux500/board-mop500-stuib.c | 22 +-
arch/arm/mach-ux500/board-mop500.c | 146 +--
arch/arm/mach-ux500/board-mop500.h | 10 +-
arch/arm/mach-ux500/cpu-db8500.c | 110 ++-
arch/arm/mach-ux500/cpu.c | 3 +
arch/arm/mach-zynq/common.c | 33 +-
arch/arm/mach-zynq/common.h | 4 +-
arch/arm/mach-zynq/include/mach/zynq_soc.h | 16 +-
arch/arm/mach-zynq/timer.c | 297 +++---
arch/arm/plat-orion/irq.c | 6 +-
arch/arm/plat-samsung/devs.c | 1 +
arch/arm/plat-samsung/include/plat/devs.h | 2 -
arch/arm/plat-samsung/include/plat/mfc.h | 11 +
arch/arm/plat-samsung/s5p-dev-mfc.c | 34 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-zynq.c | 383 ++++++++
drivers/gpio/Kconfig | 2 +-
drivers/gpio/gpio-samsung.c | 43 +-
drivers/pinctrl/mvebu/pinctrl-dove.c | 22 +-
drivers/pinctrl/mvebu/pinctrl-kirkwood.c | 568 +++++------
drivers/power/Kconfig | 3 +
drivers/power/Makefile | 1 +
drivers/power/reset/Kconfig | 15 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/gpio-poweroff.c | 129 +++
drivers/usb/host/ehci-orion.c | 38 +-
drivers/watchdog/at91sam9_wdt.c | 11 +
include/linux/clk/zynq.h | 24 +
178 files changed, 8119 insertions(+), 1443 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
create mode 100644 Documentation/devicetree/bindings/ata/exynos-sata.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/zynq-7000.txt
create mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmi.txt
create mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
create mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
create mode 100644 Documentation/devicetree/bindings/drm/exynos/mixer.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
create mode 100644 Documentation/devicetree/bindings/media/s5p-mfc.txt
create mode 100644 Documentation/devicetree/bindings/usb/ehci-orion.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
create mode 100644 arch/arm/boot/dts/ccu9540.dts
create mode 100644 arch/arm/boot/dts/cros5250-common.dtsi
create mode 100644 arch/arm/boot/dts/exynos4212.dtsi
create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts
create mode 100644 arch/arm/boot/dts/exynos4412.dtsi
create mode 100644 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/exynos4x12.dtsi
create mode 100644 arch/arm/boot/dts/exynos5250-snow.dts
create mode 100644 arch/arm/boot/dts/href.dtsi
create mode 100644 arch/arm/boot/dts/hrefprev60.dts
create mode 100644 arch/arm/boot/dts/imx25-karo-tx25.dts
create mode 100644 arch/arm/boot/dts/imx25.dtsi
create mode 100644 arch/arm/boot/dts/imx27-apf27.dts
create mode 100644 arch/arm/boot/dts/imx28-apf28.dts
create mode 100644 arch/arm/boot/dts/imx28-apf28dev.dts
create mode 100644 arch/arm/boot/dts/imx28-sps1.dts
create mode 100644 arch/arm/boot/dts/imx6q-sabreauto.dts
create mode 100644 arch/arm/boot/dts/kirkwood-6281.dtsi
create mode 100644 arch/arm/boot/dts/kirkwood-6282.dtsi
create mode 100644 arch/arm/boot/dts/kirkwood-98dx4122.dtsi
create mode 100644 arch/arm/boot/dts/stuib.dtsi
create mode 100644 arch/arm/boot/dts/u9540.dts
create mode 100644 arch/arm/boot/dts/zynq-7000.dtsi
delete mode 100644 arch/arm/boot/dts/zynq-ep107.dts
create mode 100644 arch/arm/boot/dts/zynq-zc702.dts
delete mode 100644 arch/arm/mach-exynos/dev-drm.c
create mode 100644 arch/arm/mach-imx/imx25-dt.c
create mode 100644 drivers/clk/clk-zynq.c
create mode 100644 drivers/power/reset/Kconfig
create mode 100644 drivers/power/reset/Makefile
create mode 100644 drivers/power/reset/gpio-poweroff.c
create mode 100644 include/linux/clk/zynq.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists