lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 19 Dec 2012 16:15:01 +0800
From:	Tang Chen <tangchen@...fujitsu.com>
To:	jiang.liu@...wei.com, wujianguo@...wei.com, hpa@...or.com,
	akpm@...ux-foundation.org, wency@...fujitsu.com,
	laijs@...fujitsu.com, linfeng@...fujitsu.com, yinghai@...nel.org,
	isimatu.yasuaki@...fujitsu.com, rob@...dley.net,
	kosaki.motohiro@...fujitsu.com, minchan.kim@...il.com,
	mgorman@...e.de, rientjes@...gle.com, guz.fnst@...fujitsu.com,
	rusty@...tcorp.com.au, lliubbo@...il.com, jaegeuk.hanse@...il.com,
	tony.luck@...el.com, glommer@...allels.com
Cc:	linux-kernel@...r.kernel.org, linux-mm@...ck.org,
	Tang Chen <tangchen@...fujitsu.com>
Subject: [PATCH v4 4/6] page_alloc: Introduce zone_movable_limit[] to keep movable limit for nodes

This patch introduces a new array zone_movable_limit[] to store the
ZONE_MOVABLE limit from movablecore_map boot option for all nodes.
The function sanitize_zone_movable_limit() will find out to which
node the ranges in movable_map.map[] belongs, and calculates the
low boundary of ZONE_MOVABLE for each node.

Signed-off-by: Tang Chen <tangchen@...fujitsu.com>
Signed-off-by: Liu Jiang <jiang.liu@...wei.com>
Reviewed-by: Wen Congyang <wency@...fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@...fujitsu.com>
Tested-by: Lin Feng <linfeng@...fujitsu.com>
---
 mm/page_alloc.c |   79 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 78 insertions(+), 1 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 40d2f4b..128d28a 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -212,6 +212,7 @@ static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
 static unsigned long __initdata required_kernelcore;
 static unsigned long __initdata required_movablecore;
 static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
+static unsigned long __meminitdata zone_movable_limit[MAX_NUMNODES];
 
 /* movable_zone is the "real" zone pages in ZONE_MOVABLE are taken from */
 int movable_zone;
@@ -4385,6 +4386,77 @@ static unsigned long __meminit zone_absent_pages_in_node(int nid,
 	return __absent_pages_in_range(nid, zone_start_pfn, zone_end_pfn);
 }
 
+/**
+ * sanitize_zone_movable_limit - Sanitize the zone_movable_limit array.
+ *
+ * zone_movable_limit is initialized as 0. This function will try to get
+ * the first ZONE_MOVABLE pfn of each node from movablecore_map, and
+ * assigne them to zone_movable_limit.
+ * zone_movable_limit[nid] == 0 means no limit for the node.
+ *
+ * Note: Each range is represented as [start_pfn, end_pfn)
+ */
+static void __meminit sanitize_zone_movable_limit(void)
+{
+	int map_pos = 0, i, nid;
+	unsigned long start_pfn, end_pfn;
+
+	if (!movablecore_map.nr_map)
+		return;
+
+	/* Iterate all ranges from minimum to maximum */
+	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
+		/*
+		 * If we have found lowest pfn of ZONE_MOVABLE of the node
+		 * specified by user, just go on to check next range.
+		 */
+		if (zone_movable_limit[nid])
+			continue;
+
+#ifdef CONFIG_ZONE_DMA
+		/* Skip DMA memory. */
+		if (start_pfn < arch_zone_highest_possible_pfn[ZONE_DMA])
+			start_pfn = arch_zone_highest_possible_pfn[ZONE_DMA];
+#endif
+
+#ifdef CONFIG_ZONE_DMA32
+		/* Skip DMA32 memory. */
+		if (start_pfn < arch_zone_highest_possible_pfn[ZONE_DMA32])
+			start_pfn = arch_zone_highest_possible_pfn[ZONE_DMA32];
+#endif
+
+#ifdef CONFIG_HIGHMEM
+		/* Skip lowmem if ZONE_MOVABLE is highmem. */
+		if (zone_movable_is_highmem() &&
+		    start_pfn < arch_zone_lowest_possible_pfn[ZONE_HIGHMEM])
+			start_pfn = arch_zone_lowest_possible_pfn[ZONE_HIGHMEM];
+#endif
+
+		if (start_pfn >= end_pfn)
+			continue;
+
+		while (map_pos < movablecore_map.nr_map) {
+			if (end_pfn <= movablecore_map.map[map_pos].start_pfn)
+				break;
+
+			if (start_pfn >= movablecore_map.map[map_pos].end_pfn) {
+				map_pos++;
+				continue;
+			}
+
+			/*
+			 * The start_pfn of ZONE_MOVABLE is either the minimum
+			 * pfn specified by movablecore_map, or 0, which means
+			 * the node has no ZONE_MOVABLE.
+			 */
+			zone_movable_limit[nid] = max(start_pfn,
+					movablecore_map.map[map_pos].start_pfn);
+
+			break;
+		}
+	}
+}
+
 #else /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
 static inline unsigned long __meminit zone_spanned_pages_in_node(int nid,
 					unsigned long zone_type,
@@ -4403,6 +4475,10 @@ static inline unsigned long __meminit zone_absent_pages_in_node(int nid,
 	return zholes_size[zone_type];
 }
 
+static void __meminit sanitize_zone_movable_limit(void)
+{
+}
+
 #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
 
 static void __meminit calculate_node_totalpages(struct pglist_data *pgdat,
@@ -4846,7 +4922,6 @@ static void __init find_zone_movable_pfns_for_nodes(void)
 		goto out;
 
 	/* usable_startpfn is the lowest possible pfn ZONE_MOVABLE can be at */
-	find_usable_zone_for_movable();
 	usable_startpfn = arch_zone_lowest_possible_pfn[movable_zone];
 
 restart:
@@ -5005,6 +5080,8 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 
 	/* Find the PFNs that ZONE_MOVABLE begins at in each node */
 	memset(zone_movable_pfn, 0, sizeof(zone_movable_pfn));
+	find_usable_zone_for_movable();
+	sanitize_zone_movable_limit();
 	find_zone_movable_pfns_for_nodes();
 
 	/* Print out the zone ranges */
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists