linux-kernel - [PATCH v3] usb: phy: samsung: Add support to set pmu isolation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-id: <1356077779-5759-1-git-send-email-gautam.vivek@samsung.com>
Date:	Fri, 21 Dec 2012 13:46:18 +0530
From:	Vivek Gautam <gautam.vivek@...sung.com>
To:	linux-usb@...r.kernel.org
Cc:	devicetree-discuss@...ts.ozlabs.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linux-samsung-soc@...r.kernel.org, gregkh@...uxfoundation.org,
	balbi@...com, kgene.kim@...sung.com, sylvester.nawrocki@...il.com,
	thomas.abraham@...aro.org, t.figa@...sung.com, ben-linux@...ff.org,
	broonie@...nsource.wolfsonmicro.com, l.majewski@...sung.com,
	kyungmin.park@...sung.com, grant.likely@...retlab.ca,
	heiko@...ech.de, dianders@...omium.org, p.paneri@...sung.com
Subject: [PATCH v3] usb: phy: samsung: Add support to set pmu isolation

Changes from v2:
 - Removed the phandle type of device node properties, instead using
   sub-nodes now.
 - Removed the property 'samsung,enable-mask' since it is SoC dependent
   (SoCs like S5PV210 and S3C64XX have different bits to enable/disable
   phy controller in comparison to exysno4210 onwards).
 - Maintaining the phy enable mask (which is SoC dependent) for device type phy
   and host type phy in the driver data.
 - Re-structuring to get device properties using sub-nodes for 'usbphy-pmu'

Changes from v1:
 - Changed the name of property for phy handler from'samsung,usb-phyctrl'
   to 'samsung,usb-phyhandle' to make it look more generic.
 - Similarly 'samsung,phyctrl-reg' is changed to 'samsung,phyhandle-reg'
 - Added a check for 'samsung,usb-phyhandle' before getting node from
   phandle.
 - Putting the node using 'of_node_put()' which had been missed.
 - Adding necessary check for the pointer in 'samsung_usbphy_set_isolation()'
   to avoid any NULL pointer dereferencing.
 - Unmapping the register ioremapped in 'samsung_usbphy_parse_dt_param()'.

Based on usb-next branch with Praveen Paneri's patches on top of it.
- http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/134476.html
- http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/131763.html

Vivek Gautam (1):
  usb: phy: samsung: Add support to set pmu isolation

 .../devicetree/bindings/usb/samsung-usbphy.txt     |   28 ++++
 drivers/usb/phy/samsung-usbphy.c                   |  145 +++++++++++++++++---
 2 files changed, 152 insertions(+), 21 deletions(-)

-- 
1.7.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/