| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1356098882-10732-1-git-send-email-torbenh@linutronix.de>
Date: Fri, 21 Dec 2012 15:08:02 +0100
From: Torben Hohn <torbenh@...utronix.de>
To: Alessandro Zummo <a.zummo@...ertech.it>
Cc: rtc-linux@...glegroups.com, linux-kernel@...r.kernel.org,
Torben Hohn <torbenh@...utronix.de>
Subject: [PATCH] rtc: add support for spi rtc rx4581
Signed-off-by: Torben Hohn <torbenh@...utronix.de>
---
drivers/rtc/Kconfig | 8 ++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-rx4581.c | 313 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 322 insertions(+)
create mode 100644 drivers/rtc/rtc-rx4581.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index d0cea02..64ce23f 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -519,6 +519,14 @@ config RTC_DRV_PCF2123
This driver can also be built as a module. If so, the module
will be called rtc-pcf2123.
+config RTC_DRV_RX4581
+ tristate "Epson RX-4581"
+ help
+ If you say yes here you will get support for the Epson RX-4581.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-rx4581.
+
endif # SPI_MASTER
comment "Platform RTC drivers"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index c3f62c8..9b63071 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o
+obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o
obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o
obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
diff --git a/drivers/rtc/rtc-rx4581.c b/drivers/rtc/rtc-rx4581.c
new file mode 100644
index 0000000..c49315f
--- /dev/null
+++ b/drivers/rtc/rtc-rx4581.c
@@ -0,0 +1,313 @@
+/* drivers/rtc/rtc-rx4581.c
+ *
+ * written by Torben Hohn <torbenh@...utronix.de>
+ *
+ * Based on:
+ * drivers/rtc/rtc-max6902.c
+ *
+ * Copyright (C) 2006 8D Technologies inc.
+ * Copyright (C) 2004 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for MAX6902 spi RTC
+ *
+ * and based on:
+ * drivers/rtc/rtc-rx8581.c
+ *
+ * An I2C driver for the Epson RX8581 RTC
+ *
+ * Author: Martyn Welch <martyn.welch@...com>
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
+ * Copyright 2005-06 Tower Technologies
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+#define RX4581_REG_SC 0x00 /* Second in BCD */
+#define RX4581_REG_MN 0x01 /* Minute in BCD */
+#define RX4581_REG_HR 0x02 /* Hour in BCD */
+#define RX4581_REG_DW 0x03 /* Day of Week */
+#define RX4581_REG_DM 0x04 /* Day of Month in BCD */
+#define RX4581_REG_MO 0x05 /* Month in BCD */
+#define RX4581_REG_YR 0x06 /* Year in BCD */
+#define RX4581_REG_RAM 0x07 /* RAM */
+#define RX4581_REG_AMN 0x08 /* Alarm Min in BCD*/
+#define RX4581_REG_AHR 0x09 /* Alarm Hour in BCD */
+#define RX4581_REG_ADM 0x0A
+#define RX4581_REG_ADW 0x0A
+#define RX4581_REG_TMR0 0x0B
+#define RX4581_REG_TMR1 0x0C
+#define RX4581_REG_EXT 0x0D /* Extension Register */
+#define RX4581_REG_FLAG 0x0E /* Flag Register */
+#define RX4581_REG_CTRL 0x0F /* Control Register */
+
+
+/* Flag Register bit definitions */
+#define RX4581_FLAG_UF 0x20 /* Update */
+#define RX4581_FLAG_TF 0x10 /* Timer */
+#define RX4581_FLAG_AF 0x08 /* Alarm */
+#define RX4581_FLAG_VLF 0x02 /* Voltage Low */
+
+/* Control Register bit definitions */
+#define RX4581_CTRL_UIE 0x20 /* Update Interrupt Enable */
+#define RX4581_CTRL_TIE 0x10 /* Timer Interrupt Enable */
+#define RX4581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */
+#define RX4581_CTRL_STOP 0x02 /* STOP bit */
+#define RX4581_CTRL_RESET 0x01 /* RESET bit */
+
+static int rx4581_set_reg(struct device *dev, unsigned char address,
+ unsigned char data)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ unsigned char buf[2];
+
+ /* high nibble must be '0' to write */
+ buf[0] = address & 0x0f;
+ buf[1] = data;
+
+ return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int rx4581_get_reg(struct device *dev, unsigned char address,
+ unsigned char *data)
+{
+ struct spi_device *spi = to_spi_device(dev);
+
+ /* Set MSB to indicate read */
+ *data = address | 0x80;
+
+ return spi_write_then_read(spi, data, 1, data, 1);
+}
+
+/*
+ * In the routines that deal directly with the rx8581 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int rx4581_get_datetime(struct device *dev, struct rtc_time *tm)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ unsigned char date[7];
+ unsigned char data, err;
+
+ /* First we ensure that the "update flag" is not set, we read the
+ * time and date then re-read the "update flag". If the update flag
+ * has been set, we know that the time has changed during the read so
+ * we repeat the whole process again.
+ */
+ err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data);
+ if (err != 0) {
+ dev_err(dev, "Unable to read device flags\n");
+ return -EIO;
+ }
+
+ do {
+ /* If update flag set, clear it */
+ if (data & RX4581_FLAG_UF) {
+ err = rx4581_set_reg(dev,
+ RX4581_REG_FLAG, (data & ~RX4581_FLAG_UF));
+ if (err != 0) {
+ dev_err(dev, "Unable to write device "
+ "flags\n");
+ return -EIO;
+ }
+ }
+
+ /* Now read time and date */
+ date[0] = 0x80;
+ err = spi_write_then_read(spi, date, 1, date, 7);
+ if (err < 0) {
+ dev_err(dev, "Unable to read date\n");
+ return -EIO;
+ }
+
+ /* Check flag register */
+ err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data);
+ if (err != 0) {
+ dev_err(dev, "Unable to read device flags\n");
+ return -EIO;
+ }
+ } while (data & RX4581_FLAG_UF);
+
+ if (data & RX4581_FLAG_VLF)
+ dev_info(dev,
+ "low voltage detected, date/time is not reliable.\n");
+
+ dev_dbg(dev,
+ "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
+ "wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
+ __func__,
+ date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
+
+ tm->tm_sec = bcd2bin(date[RX4581_REG_SC] & 0x7F);
+ tm->tm_min = bcd2bin(date[RX4581_REG_MN] & 0x7F);
+ tm->tm_hour = bcd2bin(date[RX4581_REG_HR] & 0x3F); /* rtc hr 0-23 */
+ tm->tm_wday = ilog2(date[RX4581_REG_DW] & 0x7F);
+ tm->tm_mday = bcd2bin(date[RX4581_REG_DM] & 0x3F);
+ tm->tm_mon = bcd2bin(date[RX4581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
+ tm->tm_year = bcd2bin(date[RX4581_REG_YR]);
+ if (tm->tm_year < 70)
+ tm->tm_year += 100; /* assume we are in 1970...2069 */
+
+
+ dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ err = rtc_valid_tm(tm);
+ if (err < 0)
+ dev_err(dev, "retrieved date/time is not valid.\n");
+
+ return err;
+}
+
+static int rx4581_set_datetime(struct device *dev, struct rtc_time *tm)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ int err;
+ unsigned char buf[8], data;
+
+ dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ buf[0] = 0x00;
+ /* hours, minutes and seconds */
+ buf[RX4581_REG_SC+1] = bin2bcd(tm->tm_sec);
+ buf[RX4581_REG_MN+1] = bin2bcd(tm->tm_min);
+ buf[RX4581_REG_HR+1] = bin2bcd(tm->tm_hour);
+
+ buf[RX4581_REG_DM+1] = bin2bcd(tm->tm_mday);
+
+ /* month, 1 - 12 */
+ buf[RX4581_REG_MO+1] = bin2bcd(tm->tm_mon + 1);
+
+ /* year and century */
+ buf[RX4581_REG_YR+1] = bin2bcd(tm->tm_year % 100);
+ buf[RX4581_REG_DW+1] = (0x1 << tm->tm_wday);
+
+ /* Stop the clock */
+ err = rx4581_get_reg(dev, RX4581_REG_CTRL, &data);
+ if (err != 0) {
+ dev_err(dev, "Unable to read control register\n");
+ return -EIO;
+ }
+
+ err = rx4581_set_reg(dev, RX4581_REG_CTRL,
+ (data | RX4581_CTRL_STOP));
+ if (err != 0) {
+ dev_err(dev, "Unable to write control register\n");
+ return -EIO;
+ }
+
+ /* write register's data */
+ err = spi_write_then_read(spi, buf, 8, NULL, 0);
+ if (err != 0) {
+ dev_err(dev, "Unable to write to date registers\n");
+ return -EIO;
+ }
+
+ /* get VLF and clear it */
+ err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data);
+ if (err != 0) {
+ dev_err(dev, "Unable to read flag register\n");
+ return -EIO;
+ }
+
+ err = rx4581_set_reg(dev, RX4581_REG_FLAG,
+ (data & ~(RX4581_FLAG_VLF)));
+ if (err != 0) {
+ dev_err(dev, "Unable to write flag register\n");
+ return -EIO;
+ }
+
+ /* Restart the clock */
+ err = rx4581_get_reg(dev, RX4581_REG_CTRL, &data);
+ if (err != 0) {
+ dev_err(dev, "Unable to read control register\n");
+ return -EIO;
+ }
+
+ err = rx4581_set_reg(dev, RX4581_REG_CTRL,
+ (data & ~(RX4581_CTRL_STOP)));
+ if (err != 0) {
+ dev_err(dev, "Unable to write control register\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static const struct rtc_class_ops rx4581_rtc_ops = {
+ .read_time = rx4581_get_datetime,
+ .set_time = rx4581_set_datetime,
+};
+
+static int __devinit rx4581_probe(struct spi_device *spi)
+{
+ struct rtc_device *rtc;
+ unsigned char tmp;
+ int res;
+
+ res = rx4581_get_reg(&spi->dev, RX4581_REG_SC, &tmp);
+ if (res != 0)
+ return res;
+
+ rtc = rtc_device_register("rx4581",
+ &spi->dev, &rx4581_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
+
+ dev_set_drvdata(&spi->dev, rtc);
+ return 0;
+}
+
+static int __devexit rx4581_remove(struct spi_device *spi)
+{
+ struct rtc_device *rtc = dev_get_drvdata(&spi->dev);
+
+ rtc_device_unregister(rtc);
+ return 0;
+}
+
+static const struct spi_device_id rx4581_id[] = {
+ { "rx4581", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, rx4581_id);
+
+static struct spi_driver rx4581_driver = {
+ .driver = {
+ .name = "rtc-rx4581",
+ .owner = THIS_MODULE,
+ },
+ .probe = rx4581_probe,
+ .remove = __devexit_p(rx4581_remove),
+ .id_table = rx4581_id,
+};
+
+module_spi_driver(rx4581_driver);
+
+MODULE_DESCRIPTION ("rx4581 spi RTC driver");
+MODULE_AUTHOR ("Torben Hohn");
+MODULE_LICENSE ("GPL");
+MODULE_ALIAS("spi:rtc-rx4581");
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists