| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAErSpo6KJvEkiqkU--sF_vySk2YUgL_9t1OEYAAGBp9Ebom26w@mail.gmail.com> Date: Fri, 4 Jan 2013 13:01:03 -0700 From: Bjorn Helgaas <bhelgaas@...gle.com> To: Jiang Liu <liuj97@...il.com> Cc: Daniel J Blueman <daniel@...ra.org>, Jesse Barnes <jbarnes@...tuousgeek.org>, Kenji Kaneshige <kaneshige.kenji@...fujitsu.com>, Yinghai Lu <yinghai@...nel.org>, Linux Kernel <linux-kernel@...r.kernel.org>, Linux PCI <linux-pci@...r.kernel.org> Subject: Re: 3.8-rc2: pciehp waitqueue hang... On Thu, Jan 3, 2013 at 8:41 AM, Jiang Liu <liuj97@...il.com> wrote: > Hi Daniel, > It seems like an issue caused by recursive PCIe HPC. > Could you please help to try the patch from: > http://www.spinics.net/lists/linux-pci/msg18625.html Hi Gerry, I'm working on merging this patch. Seems like something that might be appropriate for stable as well. Did you look for similar problems in other hotplug drivers? > Thanks! > Gerry > On 01/03/2013 11:11 PM, Daniel J Blueman wrote: >> When the Apple thunderbolt ethernet adapter comes loose on my Macbook >> Pro Retina (Intel DSL3510), we see pci_slot_name return >> non-deterministic data (ie varying each boot), and we see pciehp_wp >> remain armed with events causing the kthread to get stuck: >> >> tg3 0000:0a:00.0 eth0: Link is up at 1000 Mbps, full duplex >> tg3 0000:0a:00.0 eth0: Flow control is on for TX and on for RX >> <thunderbold adapter comes loose> >> pciehp 0000:06:03.0:pcie24: Card not present on Slot(3) >> tg3 0000:0a:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will not >> clear MAC_TX_MODE=ffffffff >> tg3 0000:0a:00.0 eth0: No firmware running >> tg3 0000:0a:00.0 eth0: Link is down >> pcieport 0000:00:01.1: System wakeup enabled by ACPI >> pciehp 0000:09:00.0:pcie24: unloading service driver pciehp >> pciehp 0000:09:00.0:pcie24: Latch open on >> Slot(\xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon) >> pciehp 0000:09:00.0:pcie24: Button pressed on >> Slot(\xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon) >> pciehp 0000:09:00.0:pcie24: Card present on >> Slot(\xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon) >> pciehp 0000:09:00.0:pcie24: Power fault on slot >> \xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon >> pciehp 0000:09:00.0:pcie24: Power fault bit 0 set >> pciehp 0000:09:00.0:pcie24: PCI slot >> #\xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon >> - powering on due to button press. >> pciehp 0000:09:00.0:pcie24: Link Training Error occurs >> pciehp 0000:09:00.0:pcie24: Failed to check link status >> INFO: task kworker/0:1:52 blocked for more than 120 seconds. >> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >> kworker/0:1 D ffff880265893090 0 52 2 0x00000000 >> ffff8802655456f8 0000000000000046 ffffffff81a21a60 ffff880265545fd8 >> 0000000000004000 ffff880265545fd8 ffff880265892bb0 ffff880265adc8d0 >> 000000000000059e 0000000000000082 ffff880265545668 ffffffff810415aa >> Call Trace: >> [<ffffffff810415aa>] ? console_unlock+0x1fa/0x4a0 >> [<ffffffff8108d16d>] ? trace_hardirqs_off+0xd/0x10 >> [<ffffffff81041b19>] ? vprintk_emit+0x1c9/0x510 >> [<ffffffff81558db4>] schedule+0x24/0x70 >> [<ffffffff8155653c>] schedule_timeout+0x19c/0x1e0 >> [<ffffffff81558c43>] wait_for_common+0xe3/0x180 >> [<ffffffff8105adc1>] ? flush_workqueue+0x111/0x4d0 >> [<ffffffff81071140>] ? try_to_wake_up+0x2d0/0x2d0 >> [<ffffffff81558d88>] wait_for_completion+0x18/0x20 >> [<ffffffff8105ae86>] flush_workqueue+0x1d6/0x4d0 >> [<ffffffff8105acb0>] ? flush_workqueue_prep_cwqs+0x200/0x200 >> [<ffffffff8125e909>] pciehp_release_ctrl+0x39/0x90 >> [<ffffffff8125b945>] pciehp_remove+0x25/0x30 >> [<ffffffff81255bf2>] pcie_port_remove_service+0x52/0x70 >> [<ffffffff81306a27>] __device_release_driver+0x77/0xe0 >> [<ffffffff81306ab9>] device_release_driver+0x29/0x40 >> [<ffffffff813064b1>] bus_remove_device+0xf1/0x140 >> [<ffffffff81303fe7>] device_del+0x127/0x1c0 >> [<ffffffff81255d70>] ? resume_iter+0x40/0x40 >> [<ffffffff81304091>] device_unregister+0x11/0x20 >> [<ffffffff81255da5>] remove_iter+0x35/0x40 >> [<ffffffff81302eb6>] device_for_each_child+0x36/0x70 >> [<ffffffff81256341>] pcie_port_device_remove+0x21/0x40 >> [<ffffffff81256588>] pcie_portdrv_remove+0x28/0x50 >> [<ffffffff8124a821>] pci_device_remove+0x41/0xc0 >> [<ffffffff81306a27>] __device_release_driver+0x77/0xe0 >> [<ffffffff81306ab9>] device_release_driver+0x29/0x40 >> [<ffffffff813064b1>] bus_remove_device+0xf1/0x140 >> [<ffffffff81303fe7>] device_del+0x127/0x1c0 >> [<ffffffff81304091>] device_unregister+0x11/0x20 >> [<ffffffff8124566c>] pci_stop_bus_device+0x8c/0xa0 >> [<ffffffff81245615>] pci_stop_bus_device+0x35/0xa0 >> [<ffffffff81245811>] pci_stop_and_remove_bus_device+0x11/0x20 >> [<ffffffff8125cc91>] pciehp_unconfigure_device+0x91/0x190 >> [<ffffffff8125c76d>] ? pciehp_power_thread+0x2d/0x110 >> [<ffffffff8125c591>] pciehp_disable_slot+0x71/0x220 >> [<ffffffff8125c826>] pciehp_power_thread+0xe6/0x110 >> [<ffffffff8105d203>] process_one_work+0x193/0x550 >> [<ffffffff8105d1a1>] ? process_one_work+0x131/0x550 >> [<ffffffff8125c740>] ? pciehp_disable_slot+0x220/0x220 >> [<ffffffff8105d96d>] worker_thread+0x15d/0x400 >> [<ffffffff8109213d>] ? trace_hardirqs_on+0xd/0x10 >> [<ffffffff8105d810>] ? rescuer_thread+0x210/0x210 >> [<ffffffff81062bd6>] kthread+0xd6/0xe0 >> [<ffffffff8155a18b>] ? _raw_spin_unlock_irq+0x2b/0x50 >> [<ffffffff81062b00>] ? __init_kthread_worker+0x70/0x70 >> [<ffffffff8155ae6c>] ret_from_fork+0x7c/0xb0 >> [<ffffffff81062b00>] ? __init_kthread_worker+0x70/0x70 >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@...r.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists