Message-id: <1357733199-17206-4-git-send-email-a.kesavan@samsung.com>
Date:	Wed, 09 Jan 2013 17:36:39 +0530
From:	Abhilash Kesavan <a.kesavan@...sung.com>
To:	myungjoo.ham@...sung.com, linux-kernel@...r.kernel.org,
	linux-pm@...r.kernel.org, kgene.kim@...sung.com
Cc:	kyungmin.park@...sung.com, rjw@...k.pl, jhbird.choi@...sung.com,
	Abhilash Kesavan <a.kesavan@...sung.com>
Subject: [PATCH 4/4] PM/Devfreq: Add Exynos5-bus devfreq driver for Exynos5250

Exynos5-bus device devfreq driver monitors PPMU counters and
adjusts operating frequencies and voltages with OPP. ASV should
be used to provide appropriate voltages as per the speed group
of the SoC rather than using a constant 1.025V.

Signed-off-by: Abhilash Kesavan <a.kesavan@...sung.com>
Cc: Jonghwan Choi <jhbird.choi@...sung.com>
Cc: Kukjin Kim <kgene.kim@...sung.com>
---
 drivers/devfreq/Kconfig               |   10 +
 drivers/devfreq/Makefile              |    1 +
 drivers/devfreq/exynos/Makefile       |    1 +
 drivers/devfreq/exynos/exynos5_bus.c  |  469 +++++++++++++++++++++++++++++++++
 drivers/devfreq/exynos/exynos5_ppmu.c |  412 +++++++++++++++++++++++++++++
 drivers/devfreq/exynos/exynos_ppmu.c  |   56 ++++
 include/linux/exynos5_ppmu.h          |   26 ++
 include/linux/exynos_ppmu.h           |   79 ++++++
 8 files changed, 1054 insertions(+), 0 deletions(-)
 create mode 100644 drivers/devfreq/exynos/exynos5_bus.c
 create mode 100644 drivers/devfreq/exynos/exynos5_ppmu.c
 create mode 100644 drivers/devfreq/exynos/exynos_ppmu.c
 create mode 100644 include/linux/exynos5_ppmu.h
 create mode 100644 include/linux/exynos_ppmu.h

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 0f079be..1560d0d 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -78,4 +78,14 @@ config ARM_EXYNOS4_BUS_DEVFREQ
 	  To operate with optimal voltages, ASV support is required
 	  (CONFIG_EXYNOS_ASV).
 
+config ARM_EXYNOS5_BUS_DEVFREQ
+	bool "ARM Exynos5250 Bus DEVFREQ Driver"
+	depends on SOC_EXYNOS5250
+	select ARCH_HAS_OPP
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	help
+	  This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int).
+	  It reads PPMU counters of memory controllers and adjusts the
+	  operating frequencies and voltages with OPP support.
+
 endif # PM_DEVFREQ
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 3bc1fef..16138c9 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_DEVFREQ_GOV_USERSPACE)	+= governor_userspace.o
 
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ)	+= exynos/
+obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ)	+= exynos/
diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile
index 1498823..69713a8 100644
--- a/drivers/devfreq/exynos/Makefile
+++ b/drivers/devfreq/exynos/Makefile
@@ -1,2 +1,3 @@
 # Exynos DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ)	+= exynos4_bus.o
+obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ)	+= exynos_ppmu.o exynos5_ppmu.o exynos5_bus.o
diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c
new file mode 100644
index 0000000..1d4a4b1
--- /dev/null
+++ b/drivers/devfreq/exynos/exynos5_bus.c
@@ -0,0 +1,469 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework
+ * Based on work done by Jonghwan Choi <jhbird.choi@...sung.com>
+ * Support for only EXYNOS5250 is present.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/opp.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos.h>
+#include <linux/regulator/consumer.h>
+#include <linux/exynos_ppmu.h>
+#include <linux/exynos5_ppmu.h>
+
+#include "../governor.h"
+
+#define MAX_SAFEVOLT			1100000 /* 1.10V */
+/* Assume that the bus is saturated if the utilization is 25% */
+#define INT_BUS_SATURATION_RATIO	25
+#define EXYNOS5_BUS_INT_POLL_TIME	msecs_to_jiffies(100)
+
+enum int_level_idx {
+	LV_0,
+	LV_1,
+	LV_2,
+	LV_3,
+	LV_4,
+	_LV_END
+};
+
+struct busfreq_data_int {
+	struct device *dev;
+	struct devfreq *devfreq;
+	bool disabled;
+	struct regulator *vdd_int;
+	unsigned long curr_freq;
+	struct notifier_block pm_notifier;
+	struct mutex lock;
+	struct pm_qos_request int_req;
+	struct clk *int_clk;
+	struct exynos5_ppmu_handle *ppmu;
+	struct delayed_work work;
+	int busy;
+};
+
+struct int_bus_opp_table {
+	unsigned int idx;
+	unsigned long clk;
+	unsigned long volt;
+};
+
+static struct int_bus_opp_table exynos5_int_opp_table[] = {
+	{LV_0, 266000, 1025000},
+	{LV_1, 200000, 1025000},
+	{LV_2, 160000, 1025000},
+	{LV_3, 133000, 1025000},
+	{LV_4, 100000, 1025000},
+	{0, 0, 0},
+};
+
+static int exynos5_int_setvolt(struct busfreq_data_int *data,
+		unsigned long volt)
+{
+	return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT);
+}
+
+static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq,
+			      u32 flags)
+{
+	int err = 0;
+	struct platform_device *pdev = container_of(dev, struct platform_device,
+						    dev);
+	struct busfreq_data_int *data = platform_get_drvdata(pdev);
+	struct opp *opp;
+	unsigned long old_freq, freq;
+	unsigned long volt;
+
+	rcu_read_lock();
+	opp = devfreq_recommended_opp(dev, _freq, flags);
+	if (IS_ERR(opp)) {
+		rcu_read_unlock();
+		dev_err(dev, "%s: Invalid OPP.\n", __func__);
+		return PTR_ERR(opp);
+	}
+
+	freq = opp_get_freq(opp);
+	volt = opp_get_voltage(opp);
+	rcu_read_unlock();
+
+	old_freq = data->curr_freq;
+
+	if (old_freq == freq)
+		return 0;
+
+	dev_dbg(dev, "targetting %lukHz %luuV\n", freq, volt);
+
+	mutex_lock(&data->lock);
+
+	if (data->disabled)
+		goto out;
+
+	if (freq > exynos5_int_opp_table[_LV_END - 1].clk)
+		pm_qos_update_request(&data->int_req,
+				data->busy * old_freq * 16 / 100000);
+	else
+		pm_qos_update_request(&data->int_req, -1);
+
+	if (old_freq < freq)
+		err = exynos5_int_setvolt(data, volt);
+	if (err)
+		goto out;
+
+	err = clk_set_rate(data->int_clk, freq * 1000);
+
+	if (err)
+		goto out;
+
+	if (old_freq > freq)
+		err = exynos5_int_setvolt(data, volt);
+	if (err)
+		goto out;
+
+	data->curr_freq = freq;
+out:
+	mutex_unlock(&data->lock);
+	return err;
+}
+
+static int exynos5_int_get_dev_status(struct device *dev,
+				      struct devfreq_dev_status *stat)
+{
+	struct platform_device *pdev = container_of(dev, struct platform_device,
+						    dev);
+	struct busfreq_data_int *data = platform_get_drvdata(pdev);
+
+	stat->current_frequency = data->curr_freq;
+	stat->busy_time = data->busy;
+	stat->total_time = 100;
+
+	return 0;
+}
+
+static void exynos5_int_poll_start(struct busfreq_data_int *data)
+{
+	schedule_delayed_work(&data->work, EXYNOS5_BUS_INT_POLL_TIME);
+}
+
+static void exynos5_int_poll_stop(struct busfreq_data_int *data)
+{
+	cancel_delayed_work_sync(&data->work);
+}
+
+static void exynos5_int_poll(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct busfreq_data_int *data;
+	int ret;
+
+	dwork = to_delayed_work(work);
+	data = container_of(dwork, struct busfreq_data_int, work);
+
+	ret = exynos5_ppmu_get_busy(data->ppmu, PPMU_SET_RIGHT);
+
+	if (ret >= 0) {
+		data->busy = ret;
+		mutex_lock(&data->devfreq->lock);
+		update_devfreq(data->devfreq);
+		mutex_unlock(&data->devfreq->lock);
+	}
+
+	schedule_delayed_work(&data->work, EXYNOS5_BUS_INT_POLL_TIME);
+}
+
+static void exynos5_int_exit(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev, struct platform_device,
+						    dev);
+	struct busfreq_data_int *data = platform_get_drvdata(pdev);
+
+	devfreq_unregister_opp_notifier(dev, data->devfreq);
+}
+
+static struct devfreq_dev_profile exynos5_devfreq_int_profile = {
+	.initial_freq		= 160000,
+	.polling_ms		= 0,
+	.target			= exynos5_busfreq_int_target,
+	.get_dev_status		= exynos5_int_get_dev_status,
+	.exit			= exynos5_int_exit,
+};
+
+static int exynos5250_init_int_tables(struct busfreq_data_int *data)
+{
+	int i, err = 0;
+
+	for (i = LV_0; i < _LV_END; i++) {
+		err = opp_add(data->dev, exynos5_int_opp_table[i].clk,
+				exynos5_int_opp_table[i].volt);
+		if (err) {
+			dev_err(data->dev, "Cannot add opp entries.\n");
+			return err;
+		}
+	}
+
+	return 0;
+}
+static struct devfreq_simple_ondemand_data exynos5_int_ondemand_data = {
+	.downdifferential = 2,
+	.upthreshold = INT_BUS_SATURATION_RATIO,
+};
+
+static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this,
+		unsigned long event, void *ptr)
+{
+	struct busfreq_data_int *data = container_of(this,
+					struct busfreq_data_int, pm_notifier);
+	struct opp *opp;
+	unsigned long maxfreq = ULONG_MAX;
+	unsigned long freq;
+	unsigned long volt;
+	int err = 0;
+
+	switch (event) {
+	case PM_SUSPEND_PREPARE:
+		/* Set Fastest and Deactivate DVFS */
+		mutex_lock(&data->lock);
+
+		data->disabled = true;
+
+		rcu_read_lock();
+		opp = opp_find_freq_floor(data->dev, &maxfreq);
+		if (IS_ERR(opp)) {
+			rcu_read_unlock();
+			err = PTR_ERR(opp);
+			goto unlock;
+		}
+		freq = opp_get_freq(opp);
+		volt = opp_get_voltage(opp);
+		rcu_read_unlock();
+
+		err = exynos5_int_setvolt(data, volt);
+		if (err)
+			goto unlock;
+
+		err = clk_set_rate(data->int_clk, freq * 1000);
+
+		if (err)
+			goto unlock;
+
+		data->curr_freq = freq;
+unlock:
+		mutex_unlock(&data->lock);
+		if (err)
+			return NOTIFY_BAD;
+		return NOTIFY_OK;
+	case PM_POST_RESTORE:
+	case PM_POST_SUSPEND:
+		/* Reactivate */
+		mutex_lock(&data->lock);
+		data->disabled = false;
+		mutex_unlock(&data->lock);
+		return NOTIFY_OK;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static __devinit int exynos5_busfreq_int_probe(struct platform_device *pdev)
+{
+	struct busfreq_data_int *data;
+	struct opp *opp;
+	struct device *dev = &pdev->dev;
+	unsigned long initial_freq;
+	unsigned long initial_volt;
+	int err = 0;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int),
+				GFP_KERNEL);
+	if (data == NULL) {
+		dev_err(dev, "Cannot allocate memory.\n");
+		return -ENOMEM;
+	}
+
+	data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event;
+	data->dev = dev;
+	mutex_init(&data->lock);
+
+	err = exynos5250_init_int_tables(data);
+	if (err)
+		goto err_regulator;
+
+	data->vdd_int = regulator_get(dev, "vdd_int");
+	if (IS_ERR(data->vdd_int)) {
+		dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
+		err = PTR_ERR(data->vdd_int);
+		goto err_regulator;
+	}
+
+	data->int_clk = clk_get(dev, "int_clk");
+	if (IS_ERR(data->int_clk)) {
+		dev_err(dev, "Cannot get clock \"int_clk\"\n");
+		err = PTR_ERR(data->int_clk);
+		goto err_clock;
+	}
+
+	rcu_read_lock();
+	opp = opp_find_freq_floor(dev,
+			&exynos5_devfreq_int_profile.initial_freq);
+	if (IS_ERR(opp)) {
+		rcu_read_unlock();
+		dev_err(dev, "Invalid initial frequency %lu kHz.\n",
+		       exynos5_devfreq_int_profile.initial_freq);
+		err = PTR_ERR(opp);
+		goto err_opp_add;
+	}
+	initial_freq = opp_get_freq(opp);
+	initial_volt = opp_get_voltage(opp);
+	rcu_read_unlock();
+	data->curr_freq = initial_freq;
+
+	err = clk_set_rate(data->int_clk, initial_freq * 1000);
+	if (err) {
+		dev_err(dev, "Failed to set initial frequency\n");
+		goto err_opp_add;
+	}
+
+	err = exynos5_int_setvolt(data, initial_volt);
+	if (err)
+		goto err_opp_add;
+
+	platform_set_drvdata(pdev, data);
+
+	data->ppmu = exynos5_ppmu_get();
+	if (!data->ppmu)
+		goto err_ppmu_get;
+
+	INIT_DELAYED_WORK(&data->work, exynos5_int_poll);
+	exynos5_int_poll_start(data);
+
+	data->devfreq = devfreq_add_device(dev, &exynos5_devfreq_int_profile,
+					   "simple_ondemand",
+					   &exynos5_int_ondemand_data);
+
+	if (IS_ERR(data->devfreq)) {
+		err = PTR_ERR(data->devfreq);
+		goto err_devfreq_add;
+	}
+
+	devfreq_register_opp_notifier(dev, data->devfreq);
+
+	err = register_pm_notifier(&data->pm_notifier);
+	if (err) {
+		dev_err(dev, "Failed to setup pm notifier\n");
+		goto err_devfreq_add;
+	}
+
+	/* TODO: Add a new QOS class for int/mif bus */
+	pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1);
+
+	return 0;
+
+err_devfreq_add:
+	devfreq_remove_device(data->devfreq);
+	exynos5_int_poll_stop(data);
+err_ppmu_get:
+	platform_set_drvdata(pdev, NULL);
+err_opp_add:
+	clk_put(data->int_clk);
+err_clock:
+	regulator_put(data->vdd_int);
+err_regulator:
+	return err;
+}
+
+static __devexit int exynos5_busfreq_int_remove(struct platform_device *pdev)
+{
+	struct busfreq_data_int *data = platform_get_drvdata(pdev);
+
+	pm_qos_remove_request(&data->int_req);
+	unregister_pm_notifier(&data->pm_notifier);
+	devfreq_remove_device(data->devfreq);
+	regulator_put(data->vdd_int);
+	clk_put(data->int_clk);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos5_busfreq_int_suspend(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev, struct platform_device,
+						    dev);
+	struct busfreq_data_int *data = platform_get_drvdata(pdev);
+
+	exynos5_int_poll_stop(data);
+	return 0;
+}
+
+static int exynos5_busfreq_int_resume(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev, struct platform_device,
+						    dev);
+	struct busfreq_data_int *data = platform_get_drvdata(pdev);
+
+	exynos5_int_poll_start(data);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(exynos5_busfreq_int_pm, exynos5_busfreq_int_suspend,
+		exynos5_busfreq_int_resume);
+
+/* platform device pointer for exynos5 devfreq device. */
+static struct platform_device *exynos5_devfreq_pdev;
+
+static struct platform_driver exynos5_busfreq_int_driver = {
+	.probe		= exynos5_busfreq_int_probe,
+	.remove		= __devexit_p(exynos5_busfreq_int_remove),
+	.driver		= {
+		.name		= "exynos5-bus-int",
+		.owner		= THIS_MODULE,
+		.pm		= &exynos5_busfreq_int_pm,
+	},
+};
+
+static int __init exynos5_busfreq_int_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&exynos5_busfreq_int_driver);
+	if (ret < 0)
+		goto out;
+
+	exynos5_devfreq_pdev =
+		platform_device_register_simple("exynos5-bus-int", -1, NULL, 0);
+	if (IS_ERR_OR_NULL(exynos5_devfreq_pdev)) {
+		ret = PTR_ERR(exynos5_devfreq_pdev);
+		goto out1;
+	}
+
+	return 0;
+out1:
+	platform_driver_unregister(&exynos5_busfreq_int_driver);
+out:
+	return ret;
+}
+late_initcall(exynos5_busfreq_int_init);
+
+static void __exit exynos5_busfreq_int_exit(void)
+{
+	platform_device_unregister(exynos5_devfreq_pdev);
+	platform_driver_unregister(&exynos5_busfreq_int_driver);
+}
+module_exit(exynos5_busfreq_int_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework");
diff --git a/drivers/devfreq/exynos/exynos5_ppmu.c b/drivers/devfreq/exynos/exynos5_ppmu.c
new file mode 100644
index 0000000..0620f24
--- /dev/null
+++ b/drivers/devfreq/exynos/exynos5_ppmu.c
@@ -0,0 +1,412 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS5 PPMU support
+ * Support for only EXYNOS5250 is present.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/exynos_ppmu.h>
+#include <linux/exynos5_ppmu.h>
+
+#include <mach/map.h>
+
+#define FIXED_POINT_OFFSET	(0x8)
+#define FIXED_POINT_MASK	(0xff)
+
+enum exynos5_ppmu_list {
+	PPMU_DDR_C,
+	PPMU_DDR_R1,
+	PPMU_DDR_L,
+	PPMU_RIGHT,
+	PPMU_CPU,
+	PPMU_END,
+};
+
+struct exynos5_ppmu_handle {
+	struct list_head node;
+	struct exynos_ppmu ppmu[PPMU_END];
+};
+
+static DEFINE_SPINLOCK(exynos5_ppmu_lock);
+static LIST_HEAD(exynos5_ppmu_handle_list);
+static struct exynos_ppmu ppmu[PPMU_END];
+
+static const char *exynos5_ppmu_name[PPMU_END] = {
+	[PPMU_DDR_C]	= "DDR_C",
+	[PPMU_DDR_R1]	= "DDR_R1",
+	[PPMU_DDR_L]	= "DDR_L",
+	[PPMU_RIGHT]	= "RIGHT",
+	[PPMU_CPU]	= "CPU",
+};
+
+static void exynos5_ppmu_reset(struct exynos_ppmu *ppmu)
+{
+	unsigned long flags;
+	void __iomem *ppmu_base = ppmu->hw_base;
+
+	/* Reset the performance and cycle counters */
+	exynos_ppmu_reset(ppmu_base);
+
+	/* Setup count registers for monitoring read/write transactions */
+	ppmu->event[PPMU_PMNCNT0] = RD_DATA_COUNT;
+	exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT0,
+			ppmu->event[PPMU_PMNCNT0]);
+	ppmu->event[PPMU_PMCCNT1] = WR_DATA_COUNT;
+	exynos_ppmu_setevent(ppmu_base, PPMU_PMCCNT1,
+			ppmu->event[PPMU_PMCCNT1]);
+	ppmu->event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
+	exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
+			ppmu->event[PPMU_PMNCNT3]);
+
+	local_irq_save(flags);
+	ppmu->reset_time = ktime_get();
+	exynos_ppmu_start(ppmu_base);
+	local_irq_restore(flags);
+}
+
+static void exynos5_ppmu_read(struct exynos_ppmu *ppmu)
+{
+	unsigned long flags;
+	ktime_t read_time;
+	ktime_t t;
+	int reg, j;
+	void __iomem *ppmu_base = ppmu->hw_base;
+
+	local_irq_save(flags);
+	read_time = ktime_get();
+	exynos_ppmu_stop(ppmu_base);
+	local_irq_restore(flags);
+
+	/* Update local data from PPMU */
+	ppmu->ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
+	reg = __raw_readl(ppmu_base + PPMU_FLAG);
+	ppmu->ccnt_overflow = reg & PPMU_CCNT_OVERFLOW;
+
+	for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
+		if (ppmu->event[j] == 0)
+			ppmu->count[j] = 0;
+		else
+			ppmu->count[j] = exynos_ppmu_read(ppmu_base, j);
+	}
+	t = ktime_sub(read_time, ppmu->reset_time);
+	ppmu->ns = ktime_to_ns(t);
+}
+
+static void exynos5_ppmu_add(struct exynos_ppmu *to, struct exynos_ppmu *from)
+{
+	int i, j;
+
+	for (i = 0; i < PPMU_END; i++) {
+		for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++)
+			to[i].count[j] += from[i].count[j];
+
+		to[i].ccnt += from[i].ccnt;
+		if (to[i].ccnt < from[i].ccnt)
+			to[i].ccnt_overflow = true;
+
+		to[i].ns += from[i].ns;
+
+		if (from[i].ccnt_overflow)
+			to[i].ccnt_overflow = true;
+	}
+}
+
+static void exynos5_ppmu_handle_clear(struct exynos5_ppmu_handle *handle)
+{
+	memset(&handle->ppmu, 0, sizeof(struct exynos_ppmu) * PPMU_END);
+}
+
+static void exynos5_ppmu_update(void)
+{
+	int i;
+	struct exynos5_ppmu_handle *handle;
+
+	for (i = 0; i < PPMU_END; i++) {
+		exynos5_ppmu_read(&ppmu[i]);
+		exynos5_ppmu_reset(&ppmu[i]);
+	}
+
+	list_for_each_entry(handle, &exynos5_ppmu_handle_list, node)
+		exynos5_ppmu_add(handle->ppmu, ppmu);
+}
+
+static int exynos5_ppmu_get_filter(enum exynos5_ppmu_sets filter,
+	enum exynos5_ppmu_list *start, enum exynos5_ppmu_list *end)
+{
+	switch (filter) {
+	case PPMU_SET_DDR:
+		*start = PPMU_DDR_C;
+		*end = PPMU_DDR_L;
+		break;
+	case PPMU_SET_RIGHT:
+		*start = PPMU_RIGHT;
+		*end = PPMU_RIGHT;
+		break;
+	case PPMU_SET_CPU:
+		*start = PPMU_CPU;
+		*end = PPMU_CPU;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int exynos5_ppmu_get_busy(struct exynos5_ppmu_handle *handle,
+	enum exynos5_ppmu_sets filter)
+{
+	unsigned long flags;
+	int i, temp, ret, busy = 0;
+	enum exynos5_ppmu_list start;
+	enum exynos5_ppmu_list end;
+
+	ret = exynos5_ppmu_get_filter(filter, &start, &end);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&exynos5_ppmu_lock, flags);
+
+	exynos5_ppmu_update();
+
+	for (i = start; i <= end; i++) {
+		if (handle->ppmu[i].ccnt_overflow) {
+			busy = -EOVERFLOW;
+			break;
+		}
+		temp = handle->ppmu[i].count[PPMU_PMNCNT3] * 100;
+		if (handle->ppmu[i].ccnt > 0)
+			temp /= handle->ppmu[i].ccnt;
+		if (temp > busy)
+			busy = temp;
+	}
+
+	exynos5_ppmu_handle_clear(handle);
+
+	spin_unlock_irqrestore(&exynos5_ppmu_lock, flags);
+
+	return busy;
+}
+
+static void exynos5_ppmu_put(struct exynos5_ppmu_handle *handle)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&exynos5_ppmu_lock, flags);
+
+	list_del(&handle->node);
+
+	spin_unlock_irqrestore(&exynos5_ppmu_lock, flags);
+
+	kfree(handle);
+}
+
+struct exynos5_ppmu_handle *exynos5_ppmu_get(void)
+{
+	struct exynos5_ppmu_handle *handle;
+	unsigned long flags;
+
+	handle = kzalloc(sizeof(struct exynos5_ppmu_handle), GFP_KERNEL);
+	if (!handle)
+		return NULL;
+
+	spin_lock_irqsave(&exynos5_ppmu_lock, flags);
+
+	exynos5_ppmu_update();
+	list_add_tail(&handle->node, &exynos5_ppmu_handle_list);
+
+	spin_unlock_irqrestore(&exynos5_ppmu_lock, flags);
+
+	return handle;
+}
+
+static void exynos5_ppmu_debug_compute(struct exynos_ppmu *ppmu,
+	enum ppmu_counter i, u32 *sat, u32 *freq, u32 *bw)
+{
+	u64 ns = ppmu->ns;
+	u32 busy = ppmu->count[i];
+	u32 total = ppmu->ccnt;
+
+	u64 s;
+	u64 f;
+	u64 b;
+
+	s = (u64)busy * 100 * (1 << FIXED_POINT_OFFSET);
+	s += total / 2;
+	do_div(s, total);
+
+	f = (u64)total * 1000 * (1 << FIXED_POINT_OFFSET);
+	f += ns / 2;
+	f = div64_u64(f, ns);
+
+	b = (u64)busy * (128 / 8) * 1000 * (1 << FIXED_POINT_OFFSET);
+	b += ns / 2;
+	b = div64_u64(b, ns);
+
+	*sat = s;
+	*freq = f;
+	*bw = b;
+}
+
+static void exynos5_ppmu_debug_show_one_counter(struct seq_file *s,
+	const char *name, const char *type, struct exynos_ppmu *ppmu,
+	enum ppmu_counter i, u32 *bw_total)
+{
+	u32 sat;
+	u32 freq;
+	u32 bw;
+
+	exynos5_ppmu_debug_compute(ppmu, i, &sat, &freq, &bw);
+
+	seq_printf(s, "%-10s %-10s %4u.%02u MBps %3u.%02u MHz %2u.%02u%%\n",
+		name, type,
+		bw >> FIXED_POINT_OFFSET,
+		(bw & FIXED_POINT_MASK) * 100 / (1 << FIXED_POINT_OFFSET),
+		freq >> FIXED_POINT_OFFSET,
+		(freq & FIXED_POINT_MASK) * 100 / (1 << FIXED_POINT_OFFSET),
+		sat >> FIXED_POINT_OFFSET,
+		(sat & FIXED_POINT_MASK) * 100 / (1 << FIXED_POINT_OFFSET));
+
+	*bw_total += bw;
+}
+
+static void exynos5_ppmu_debug_show_one(struct seq_file *s,
+	const char *name, struct exynos_ppmu *ppmu,
+	u32 *bw_total)
+{
+	exynos5_ppmu_debug_show_one_counter(s, name, "read+write",
+		ppmu, PPMU_PMNCNT3, &bw_total[PPMU_PMNCNT3]);
+	exynos5_ppmu_debug_show_one_counter(s, "", "read",
+		ppmu, PPMU_PMNCNT0, &bw_total[PPMU_PMNCNT0]);
+	exynos5_ppmu_debug_show_one_counter(s, "", "write",
+		ppmu, PPMU_PMCCNT1, &bw_total[PPMU_PMCCNT1]);
+
+}
+
+static int exynos5_ppmu_debug_show(struct seq_file *s, void *d)
+{
+	int i;
+	u32 bw_total[PPMU_PMNCNT_MAX];
+	struct exynos5_ppmu_handle *handle;
+	unsigned long flags;
+
+	memset(bw_total, 0, sizeof(bw_total));
+
+	handle = exynos5_ppmu_get();
+	msleep(100);
+
+	spin_lock_irqsave(&exynos5_ppmu_lock, flags);
+
+	exynos5_ppmu_update();
+
+	for (i = 0; i < PPMU_CPU; i++)
+		exynos5_ppmu_debug_show_one(s, exynos5_ppmu_name[i],
+				&handle->ppmu[i], bw_total);
+
+	seq_printf(s, "%-10s %-10s %4u.%02u MBps\n", "total", "read+write",
+		bw_total[PPMU_PMNCNT3] >> FIXED_POINT_OFFSET,
+		(bw_total[PPMU_PMNCNT3] & FIXED_POINT_MASK) *
+				100 / (1 << FIXED_POINT_OFFSET));
+	seq_printf(s, "%-10s %-10s %4u.%02u MBps\n", "", "read",
+		bw_total[PPMU_PMNCNT0] >> FIXED_POINT_OFFSET,
+		(bw_total[PPMU_PMNCNT0] & FIXED_POINT_MASK) *
+				100 / (1 << FIXED_POINT_OFFSET));
+	seq_printf(s, "%-10s %-10s %4u.%02u MBps\n", "", "write",
+		bw_total[PPMU_PMCCNT1] >> FIXED_POINT_OFFSET,
+		(bw_total[PPMU_PMCCNT1] & FIXED_POINT_MASK) *
+				100 / (1 << FIXED_POINT_OFFSET));
+
+	seq_printf(s, "\n");
+
+	exynos5_ppmu_debug_show_one(s, exynos5_ppmu_name[PPMU_CPU],
+			&ppmu[PPMU_CPU], bw_total);
+
+	spin_unlock_irqrestore(&exynos5_ppmu_lock, flags);
+
+	exynos5_ppmu_put(handle);
+
+	return 0;
+}
+
+static int exynos5_ppmu_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, exynos5_ppmu_debug_show, inode->i_private);
+}
+
+static const struct file_operations exynos5_ppmu_debug_fops = {
+	.open		= exynos5_ppmu_debug_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init exynos5_ppmu_debug_init(void)
+{
+	debugfs_create_file("exynos5_bus", S_IRUGO, NULL, NULL,
+		&exynos5_ppmu_debug_fops);
+	return 0;
+}
+late_initcall(exynos5_ppmu_debug_init);
+
+static int exynos5_ppmu_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int i;
+
+	for (i = 0; i < PPMU_END; i++) {
+		/* get the memory region */
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (res == NULL) {
+			dev_err(&pdev->dev, "failed to get memory region resource\n");
+			return -ENOENT;
+		}
+
+		ppmu[i].hw_base = devm_request_and_ioremap(&pdev->dev, res);
+		if (ppmu->hw_base == NULL) {
+			dev_err(&pdev->dev, "failed to ioremap memory region\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int __devexit exynos5_ppmu_remove(struct platform_device *pdev)
+{
+	dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name);
+
+	return 0;
+}
+
+static const struct of_device_id exynos5_ppmu_match[] = {
+	{
+		.compatible = "samsung,exynos5250-ppmu",
+	},
+	{},
+};
+
+static struct platform_driver exynos5_ppmu_driver = {
+	.probe		= exynos5_ppmu_probe,
+	.remove		= __devexit_p(exynos5_ppmu_remove),
+	.driver		= {
+		.name	= "exynos5-ppmu",
+		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(exynos5_ppmu_match),
+	},
+};
+module_platform_driver(exynos5_ppmu_driver);
diff --git a/drivers/devfreq/exynos/exynos_ppmu.c b/drivers/devfreq/exynos/exynos_ppmu.c
new file mode 100644
index 0000000..da373be
--- /dev/null
+++ b/drivers/devfreq/exynos/exynos_ppmu.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS - PPMU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <linux/exynos_ppmu.h>
+
+void exynos_ppmu_reset(void __iomem *ppmu_base)
+{
+	__raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base);
+	__raw_writel(PPMU_ENABLE_CYCLE  |
+		     PPMU_ENABLE_COUNT0 |
+		     PPMU_ENABLE_COUNT1 |
+		     PPMU_ENABLE_COUNT2 |
+		     PPMU_ENABLE_COUNT3,
+		     ppmu_base + PPMU_CNTENS);
+}
+
+void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
+			unsigned int evt)
+{
+	__raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch));
+}
+
+void exynos_ppmu_start(void __iomem *ppmu_base)
+{
+	__raw_writel(PPMU_ENABLE, ppmu_base);
+}
+
+void exynos_ppmu_stop(void __iomem *ppmu_base)
+{
+	__raw_writel(PPMU_DISABLE, ppmu_base);
+}
+
+unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch)
+{
+	unsigned int total;
+
+	if (ch == PPMU_PMNCNT3)
+		total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) |
+			  __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1)));
+	else
+		total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch));
+
+	return total;
+}
diff --git a/include/linux/exynos5_ppmu.h b/include/linux/exynos5_ppmu.h
new file mode 100644
index 0000000..9f492c1
--- /dev/null
+++ b/include/linux/exynos5_ppmu.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS5 PPMU header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __DEVFREQ_EXYNOS5_PPMU_H
+#define __DEVFREQ_EXYNOS5_PPMU_H __FILE__
+
+enum exynos5_ppmu_sets {
+	PPMU_SET_DDR,
+	PPMU_SET_RIGHT,
+	PPMU_SET_CPU,
+};
+
+struct exynos5_ppmu_handle *exynos5_ppmu_get(void);
+extern int exynos5_ppmu_get_busy(struct exynos5_ppmu_handle *handle,
+	enum exynos5_ppmu_sets filter);
+
+#endif /* __DEVFREQ_EXYNOS5_PPMU_H */
+
diff --git a/include/linux/exynos_ppmu.h b/include/linux/exynos_ppmu.h
new file mode 100644
index 0000000..b46d31b
--- /dev/null
+++ b/include/linux/exynos_ppmu.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS PPMU header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __DEVFREQ_EXYNOS_PPMU_H
+#define __DEVFREQ_EXYNOS_PPMU_H __FILE__
+
+#include <linux/ktime.h>
+
+/* For PPMU Control */
+#define PPMU_ENABLE             BIT(0)
+#define PPMU_DISABLE            0x0
+#define PPMU_CYCLE_RESET        BIT(1)
+#define PPMU_COUNTER_RESET      BIT(2)
+
+#define PPMU_ENABLE_COUNT0      BIT(0)
+#define PPMU_ENABLE_COUNT1      BIT(1)
+#define PPMU_ENABLE_COUNT2      BIT(2)
+#define PPMU_ENABLE_COUNT3      BIT(3)
+#define PPMU_ENABLE_CYCLE       BIT(31)
+
+#define PPMU_CNTENS		0x10
+#define PPMU_FLAG		0x50
+#define PPMU_CCNT_OVERFLOW	BIT(31)
+#define PPMU_CCNT		0x100
+
+#define PPMU_PMCNT0		0x110
+#define PPMU_PMCNT_OFFSET	0x10
+#define PMCNT_OFFSET(x)		(PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x))
+
+#define PPMU_BEVT0SEL		0x1000
+#define PPMU_BEVTSEL_OFFSET	0x100
+#define PPMU_BEVTSEL(x)		(PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET))
+
+/* For Event Selection */
+#define RD_DATA_COUNT		0x5
+#define WR_DATA_COUNT		0x6
+#define RDWR_DATA_COUNT		0x7
+
+enum ppmu_counter {
+	PPMU_PMNCNT0,
+	PPMU_PMCCNT1,
+	PPMU_PMNCNT2,
+	PPMU_PMNCNT3,
+	PPMU_PMNCNT_MAX,
+};
+
+struct bus_opp_table {
+	unsigned int idx;
+	unsigned long clk;
+	unsigned long volt;
+};
+
+struct exynos_ppmu {
+	void __iomem *hw_base;
+	unsigned int ccnt;
+	unsigned int event[PPMU_PMNCNT_MAX];
+	unsigned int count[PPMU_PMNCNT_MAX];
+	unsigned long long ns;
+	ktime_t reset_time;
+	bool ccnt_overflow;
+	bool count_overflow[PPMU_PMNCNT_MAX];
+};
+
+void exynos_ppmu_reset(void __iomem *ppmu_base);
+void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
+			unsigned int evt);
+void exynos_ppmu_start(void __iomem *ppmu_base);
+void exynos_ppmu_stop(void __iomem *ppmu_base);
+unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch);
+#endif /* __DEVFREQ_EXYNOS_PPMU_H */
+
-- 
1.7.8.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists