linux-kernel - [PATCH V3 1/3] ARM: davinci: da850: add pinctrl driver DT entries

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1357813838-26511-2-git-send-email-anilkumar.v@ti.com>
Date:	Thu, 10 Jan 2013 16:00:36 +0530
From:	"Kumar, Anil" <anilkumar.v@...com>
To:	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>,
	<davinci-linux-open-source@...ux.davincidsp.com>
CC:	<linux@....linux.org.uk>, <nsekhar@...com>, <khilman@...com>,
	<hs@...x.de>
Subject: [PATCH V3 1/3] ARM: davinci: da850: add pinctrl driver DT entries

For DT, DaVinci platform can use pinctrl-single driver for handling
padconf registers.

Enable PINCTRL Kconfig for MACH_DA8XX_DT platform. Add required
pinctrl DT entries in da850 dts file.

 Test procedure
  1)Populate DT file with NAND node information.
  2)Populate board DT file with pinmux information for NAND.
  3)Boot and confirm NAND is detected by the kernel.
  4)cat /proc/mtd to show partitions.

Signed-off-by: Kumar, Anil <anilkumar.v@...com>
---
:100644 100644 37dc5a3... c7609d0... M	arch/arm/boot/dts/da850-evm.dts
:100644 100644 fbada87... e9c6e82... M	arch/arm/boot/dts/da850.dtsi
:100644 100644 0153950... a075b3e... M	arch/arm/mach-davinci/Kconfig
 arch/arm/boot/dts/da850-evm.dts |    3 +++
 arch/arm/boot/dts/da850.dtsi    |   10 ++++++++++
 arch/arm/mach-davinci/Kconfig   |    1 +
 3 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 37dc5a3..c7609d0 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -15,6 +15,9 @@
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
 	soc {
+		pmx_core:pinmux@...4120 {
+			status = "okay";
+		};
 		serial0: serial@...2000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index fbada87..e9c6e82 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -29,6 +29,16 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x01c00000 0x400000>;
 
+		pmx_core:pinmux@...4120 {
+			compatible = "pinctrl-single";
+			reg = <0x14120 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xffffffff>;
+			status = "disabled";
+		};
 		serial0: serial@...2000 {
 			compatible = "ns16550a";
 			reg = <0x42000 0x100>;
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 0153950..a075b3e 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -62,6 +62,7 @@ config MACH_DA8XX_DT
 	bool "Support DA8XX platforms using device tree"
 	default y
 	depends on ARCH_DAVINCI_DA8XX
+	select PINCTRL
 	help
 	  Say y here to include support for TI DaVinci DA850 based using
 	  Flattened Device Tree. More information at Documentation/devicetree
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/