[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <50EFDE44.9010108@ti.com>
Date: Fri, 11 Jan 2013 11:41:24 +0200
From: Roger Quadros <rogerq@...com>
To: Sergei Shtylyov <sshtylyov@...sta.com>
CC: <balbi@...com>, <gregkh@...uxfoundation.org>,
<sameo@...ux.intel.com>, <tony@...mide.com>, <kishon@...com>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 04/14] usb: phy: nop: Handle power supply regulator for
the PHY
On 01/10/2013 08:06 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 01/10/2013 07:51 PM, Roger Quadros wrote:
>
>> We use "vcc" as the supply name for the PHY's power supply.
>> The power supply will be enabled during .init() and disabled
>> during .shutdown()
>
>> Signed-off-by: Roger Quadros <rogerq@...com>
>> ---
>> drivers/usb/otg/nop-usb-xceiv.c | 18 ++++++++++++++++++
>> 1 files changed, 18 insertions(+), 0 deletions(-)
>
>> diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
>> index 163f972..1c6db10 100644
>> --- a/drivers/usb/otg/nop-usb-xceiv.c
>> +++ b/drivers/usb/otg/nop-usb-xceiv.c
> [...]
>> @@ -70,6 +72,11 @@ static int nop_init(struct usb_phy *phy)
>> {
>> struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev);
>>
>> + if (nop->vcc) {
>> + if (regulator_enable(nop->vcc))
>> + dev_err(phy->dev, "Failed to enable power\n");
>> + }
>
> Could be collapsed into single *if*.
Right.
>
>> +
>> if (nop->clk)
>> clk_enable(nop->clk);
>>
>> @@ -82,6 +89,11 @@ static void nop_shutdown(struct usb_phy *phy)
>>
>> if (nop->clk)
>> clk_disable(nop->clk);
>> +
>> + if (nop->vcc) {
>> + if (regulator_disable(nop->vcc))
>> + dev_err(phy->dev, "Failed to disable power\n");
>> + }
>
> Same here.
OK. I'll fix them in next spin.
--cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists