[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130111175454.GI14149@atomide.com>
Date: Fri, 11 Jan 2013 09:54:55 -0800
From: Tony Lindgren <tony@...mide.com>
To: Matt Porter <mporter@...com>
Cc: Sekhar Nori <nsekhar@...com>,
Grant Likely <grant.likely@...retlab.ca>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Benoit Cousson <b-cousson@...com>,
Russell King <linux@....linux.org.uk>,
Vinod Koul <vinod.koul@...el.com>,
Rob Landley <rob@...dley.net>, Chris Ball <cjb@...top.org>,
Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Linux DaVinci Kernel List
<davinci-linux-open-source@...ux.davincidsp.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Documentation List <linux-doc@...r.kernel.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Linux SPI Devel List
<spi-devel-general@...ts.sourceforge.net>,
Arnd Bergmann <arnd@...db.de>, Dan Williams <djbw@...com>,
Rob Herring <rob.herring@...xeda.com>
Subject: Re: [PATCH v4 10/14] mmc: omap_hsmmc: add generic DMA request
support to the DT binding
* Matt Porter <mporter@...com> [130110 21:47]:
> The binding definition is based on the generic DMA request binding.
Acked-by: Tony Lindgren <tony@...mide.com>
> Signed-off-by: Matt Porter <mporter@...com>
> ---
> .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 25 +++++++++++++++++++-
> 1 file changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> index ed271fc..826cc51 100644
> --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> @@ -20,8 +20,28 @@ ti,dual-volt: boolean, supports dual voltage cards
> ti,non-removable: non-removable slot (like eMMC)
> ti,needs-special-reset: Requires a special softreset sequence
> ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
> +dmas: DMA controller phandle and DMA request value ordered pair
> +One tx and one rx pair is required.
> +dma-names: DMA request names. These strings correspond 1:1 with
> +the ordered pairs in dmas. The RX request must be "rx" and the
> +TX request must be "tx".
> +
> +Examples:
> +
> +[hwmod populated DMA resources]
> +
> + mmc1: mmc@...809c000 {
> + compatible = "ti,omap4-hsmmc";
> + reg = <0x4809c000 0x400>;
> + ti,hwmods = "mmc1";
> + ti,dual-volt;
> + bus-width = <4>;
> + vmmc-supply = <&vmmc>; /* phandle to regulator node */
> + ti,non-removable;
> + };
> +
> +[generic DMA request binding]
>
> -Example:
> mmc1: mmc@...809c000 {
> compatible = "ti,omap4-hsmmc";
> reg = <0x4809c000 0x400>;
> @@ -30,4 +50,7 @@ Example:
> bus-width = <4>;
> vmmc-supply = <&vmmc>; /* phandle to regulator node */
> ti,non-removable;
> + dmas = <&edma 24
> + &edma 25>;
> + dma-names = "tx", "rx";
> };
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists