| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20130114200540.9B5BE3E2458@localhost> Date: Mon, 14 Jan 2013 20:05:40 +0000 From: Grant Likely <grant.likely@...retlab.ca> To: Masanari Iida <standby24x7@...il.com>, rob.herring@...xeda.com, devicetree-discuss@...ts.ozlabs.org, rob@...dley.net, linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org Cc: Masanari Iida <standby24x7@...il.com> Subject: Re: [PATCH] documentation: devicetree: Fix typo within Documentation/devicetree On Mon, 14 Jan 2013 15:14:56 +0900, Masanari Iida <standby24x7@...il.com> wrote: > Correct spelling typos within Documentation/devicetree > > Signed-off-by: Masanari Iida <standby24x7@...il.com> Applied, thanks. g. > --- > Documentation/devicetree/bindings/arm/atmel-aic.txt | 2 +- > Documentation/devicetree/bindings/arm/exynos/power_domain.txt | 2 +- > Documentation/devicetree/bindings/arm/gic.txt | 4 ++-- > Documentation/devicetree/bindings/arm/omap/omap.txt | 6 +++--- > Documentation/devicetree/bindings/i2c/samsung-i2c.txt | 2 +- > Documentation/devicetree/bindings/mips/cavium/dma-engine.txt | 2 +- > Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt | 6 +++--- > Documentation/devicetree/bindings/mmc/samsung-sdhci.txt | 2 +- > Documentation/devicetree/bindings/powerpc/fsl/srio.txt | 4 ++-- > Documentation/devicetree/bindings/regulator/tps62360-regulator.txt | 4 ++-- > Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 2 +- > Documentation/devicetree/bindings/watchdog/samsung-wdt.txt | 2 +- > 12 files changed, 19 insertions(+), 19 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt > index 19078bf..ad03121 100644 > --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt > +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt > @@ -4,7 +4,7 @@ Required properties: > - compatible: Should be "atmel,<chip>-aic" > - interrupt-controller: Identifies the node as an interrupt controller. > - interrupt-parent: For single AIC system, it is an empty property. > -- #interrupt-cells: The number of cells to define the interrupts. It sould be 3. > +- #interrupt-cells: The number of cells to define the interrupts. It should be 3. > The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet). > The second cell is used to specify flags: > bits[3:0] trigger type and level flags: > diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt > index 6528e21..3fb457b 100644 > --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt > +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt > @@ -4,7 +4,7 @@ Exynos processors include support for multiple power domains which are used > to gate power to one or more peripherals on the processor. > > Required Properties: > -- compatiable: should be one of the following. > +- compatible: should be one of the following. > * samsung,exynos4210-pd - for exynos4210 type power domain. > - reg: physical base address of the controller and length of memory mapped > region. > diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt > index 62eb8df..3dfb0c0 100644 > --- a/Documentation/devicetree/bindings/arm/gic.txt > +++ b/Documentation/devicetree/bindings/arm/gic.txt > @@ -42,7 +42,7 @@ Main node required properties: > > Optional > - interrupts : Interrupt source of the parent interrupt controller on > - secondary GICs, or VGIC maintainance interrupt on primary GIC (see > + secondary GICs, or VGIC maintenance interrupt on primary GIC (see > below). > > - cpu-offset : per-cpu offset within the distributor and cpu interface > @@ -74,7 +74,7 @@ Required properties: > virtual interface control register base and size. The 2nd additional > region is the GIC virtual cpu interface register base and size. > > -- interrupts : VGIC maintainance interrupt. > +- interrupts : VGIC maintenance interrupt. > > Example: > > diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt > index d0051a7..f8288ea 100644 > --- a/Documentation/devicetree/bindings/arm/omap/omap.txt > +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt > @@ -39,16 +39,16 @@ Boards: > - OMAP3 Tobi with Overo : Commercial expansion board with daughter board > compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3" > > -- OMAP4 SDP : Software Developement Board > +- OMAP4 SDP : Software Development Board > compatible = "ti,omap4-sdp", "ti,omap4430" > > - OMAP4 PandaBoard : Low cost community board > compatible = "ti,omap4-panda", "ti,omap4430" > > -- OMAP3 EVM : Software Developement Board for OMAP35x, AM/DM37x > +- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x > compatible = "ti,omap3-evm", "ti,omap3" > > -- AM335X EVM : Software Developement Board for AM335x > +- AM335X EVM : Software Development Board for AM335x > compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3" > > - AM335X Bone : Low cost community board > diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt > index b6cb5a1..ccdf9c9 100644 > --- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt > +++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt > @@ -18,7 +18,7 @@ Optional properties: > The gpio specifier depends on the gpio controller. Required in all > cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output > lines are permanently wired to the respective client > - - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not > + - samsung,i2c-slave-addr: Slave address in multi-master environment. If not > specified, default value is 0. > - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not > specified, the default value in Hz is 100000. > diff --git a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt > index cb4291e..a5bdff4 100644 > --- a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt > +++ b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt > @@ -1,7 +1,7 @@ > * DMA Engine. > > The Octeon DMA Engine transfers between the Boot Bus and main memory. > -The DMA Engine will be refered to by phandle by any device that is > +The DMA Engine will be referred to by phandle by any device that is > connected to it. > > Properties: > diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > index 7927689..898b222 100644 > --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > @@ -11,11 +11,11 @@ Required Properties: > > * compatible: should be > - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210 > - specific extentions. > + specific extensions. > - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412 > - specific extentions. > + specific extensions. > - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 > - specific extentions. > + specific extensions. > > * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface > unit (ciu) clock. This property is applicable only for Exynos5 SoC's and > diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt > index 630a7d7..43acfdf 100644 > --- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt > +++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt > @@ -49,5 +49,5 @@ Example: > }; > > Note: This example shows both SoC specific and board specific properties > - in a single device node. The properties can be actually be seperated > + in a single device node. The properties can be actually be separated > into SoC specific node and board specific node. > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt > index b039bcb..07abf0f 100644 > --- a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt > +++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt > @@ -8,9 +8,9 @@ Properties: > Definition: Must include "fsl,srio" for IP blocks with IP Block > Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0. > > - Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major > + Optionally, a compatible string of "fsl,srio-vX.Y" where X is Major > version in IP Block Revision Register and Y is Minor version. If this > - compatiable is provided it should be ordered before "fsl,srio". > + compatible is provided it should be ordered before "fsl,srio". > > - reg > Usage: required > diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt > index c8ca6b8..1b20c3d 100644 > --- a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt > +++ b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt > @@ -17,9 +17,9 @@ Optional properties: > - ti,vsel1-gpio: Gpio for controlling VSEL1 line. > If this property is missing, then assume that there is no GPIO > for vsel1 control. > -- ti,vsel0-state-high: Inital state of vsel0 input is high. > +- ti,vsel0-state-high: Initial state of vsel0 input is high. > If this property is missing, then assume the state as low (0). > -- ti,vsel1-state-high: Inital state of vsel1 input is high. > +- ti,vsel1-state-high: Initial state of vsel1 input is high. > If this property is missing, then assume the state as low (0). > > Any property defined as part of the core regulator binding, defined in > diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt > index 90ec45f..7ac7259 100644 > --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt > +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt > @@ -7,7 +7,7 @@ Required properties: > - reg: physical base address of the controller and length of memory mapped > region. > - interrupts: Two interrupt numbers to the cpu should be specified. First > - interrupt number is the rtc alarm interupt and second interrupt number > + interrupt number is the rtc alarm interrupt and second interrupt number > is the rtc tick interrupt. The number of cells representing a interrupt > depends on the parent interrupt controller. > > diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt > index 79ead82..ce0d8e7 100644 > --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt > +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt > @@ -2,7 +2,7 @@ > > The Samsung's Watchdog controller is used for resuming system operation > after a preset amount of time during which the WDT reset event has not > -occured. > +occurred. > > Required properties: > - compatible : should be "samsung,s3c2410-wdt" > -- > 1.8.1.336.g94702dd > -- Grant Likely, B.Sc, P.Eng. Secret Lab Technologies, Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists