linux-kernel - Re: tg3 v3.123 in 100Mbps Full-Duplex mode with autoneg off

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 14 Jan 2013 15:32:45 -0800
From:	"Michael Chan" <mchan@...adcom.com>
To:	"Marcin Miotk" <marcinmiotk81@...il.com>
cc:	王金浦 <jinpuwang@...il.com>,
	nsujir@...adcom.com, "Benjamin Li" <benli@...adcom.com>,
	LKML <linux-kernel@...r.kernel.org>
Subject: Re: tg3 v3.123 in 100Mbps Full-Duplex mode with autoneg off

On Wed, 2013-01-09 at 08:03 +0100, Marcin Miotk wrote:
> 03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715
> Gigabit Ethernet (rev a3)
> 03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715
> Gigabit Ethernet (rev a3) 

I tested on 3.7 kernel and it seemed to work.  Bear in mind that you'll
lose auto MDI-X when both sides don't autoneg.  Please provide the
following:

1. ethtool eth0 with a working kernel.  I'd like to see the MDI-X
setting when it is working.

2. mii-tool -vvv eth0 with the non-working kernel.

Thanks.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/