[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <50F52FC5.9000109@nvidia.com>
Date: Tue, 15 Jan 2013 16:00:29 +0530
From: Laxman Dewangan <ldewangan@...dia.com>
To: Laxman Dewangan <ldewangan@...dia.com>
CC: "linus.walleij@...aro.org" <linus.walleij@...aro.org>,
Pritesh Raithatha <praithatha@...dia.com>,
"grant.likely@...retlab.ca" <grant.likely@...retlab.ca>,
"rob.herring@...xeda.com" <rob.herring@...xeda.com>,
"devicetree-discuss@...ts.ozlabs.org"
<devicetree-discuss@...ts.ozlabs.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>
Subject: Re: [PATCH V2 1/2] pinctrl: tegra: add support for rcv-sel and drive
type
Hi Linus W,
On Tuesday 08 January 2013 01:02 PM, Laxman Dewangan wrote:
> From: Pritesh Raithatha <praithatha@...dia.com>
>
> NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e.
> rcv-sel and drive type.
>
> rcv-sel: Select between High and Normal VIL/VIH receivers.
> RCVR_SEL=1: High VIL/VIH
> RCVR_SEL=0: Normal VIL/VIH
>
> drv_type: Ouptput drive type:
> 33-50 ohm driver: 0x1
> 66-100ohm driver: 0x0
>
> Add support of these parameters to be configure from DTS file.
>
> Tegra20 and Tegra30 does not support this configuration and hence initialize their
> pinmux structure with reg = -1.
>
> Originally written by Pritesh Raithatha.
> Changes by ldewangan:
> - remove drvtype_width as it is always 2.
> - Better describe the change.
>
> Signed-off-by: Pritesh Raithatha <praithatha@...dia.com>
> Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
> Reviewed-by: Stephen Warren <swarren@...dia.com>
> ---
Can you please review the series and let us know if any thing I can do
for closing this?
Thanks,
Laxman
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists