[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACRpkdYe0MPC=jiOgzd0zRkiAFas21O80MiR8dp9UdmwptDfmw@mail.gmail.com>
Date: Thu, 17 Jan 2013 09:30:15 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: Laxman Dewangan <ldewangan@...dia.com>,
Stephen Warren <swarren@...dotorg.org>
Cc: praithatha@...dia.com, grant.likely@...retlab.ca,
rob.herring@...xeda.com, devicetree-discuss@...ts.ozlabs.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-tegra@...r.kernel.org
Subject: Re: [PATCH 1/2] pinctrl: tegra: add support for rcv-sel and drive type
On Sat, Jan 5, 2013 at 1:02 PM, Laxman Dewangan <ldewangan@...dia.com> wrote:
> From: Pritesh Raithatha <praithatha@...dia.com>
>
> NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e.
> rcv-sel and drive type.
>
> rcv-sel: Select between High and Normal VIL/VIH receivers.
> RCVR_SEL=1: High VIL/VIH
> RCVR_SEL=0: Normal VIL/VIH
>
> drv_type: Ouptput drive type:
> 33-50 ohm driver: 0x1
> 66-100ohm driver: 0x0
>
> Add support of these parameters to be configure from DTS file.
>
> Tegra20 and Tegra30 does not support this configuration and hence initialize their
> pinmux structure with reg = -1.
>
> Originally written by Pritesh Raithatha.
> Changes by ldewangan:
> - remove drvtype_width as it is always 2.
> - Better describe the change.
>
> Signed-off-by: Pritesh Raithatha <praithatha@...dia.com>
> Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
Stephen, can you look at this patch?
Authors: you need Stephen's ACK on this.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists