linux-kernel - [PATCH 1/1] ARM: ux500: Enable Snowball's GPIO controlled Ethernet regulator in DT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1358775323-8155-1-git-send-email-lee.jones@linaro.org>
Date:	Mon, 21 Jan 2013 13:35:23 +0000
From:	Lee Jones <lee.jones@...aro.org>
To:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:	arnd@...db.de, linus.walleij@...ricsson.com,
	Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 1/1] ARM: ux500: Enable Snowball's GPIO controlled Ethernet regulator in DT

The Snowball Board's Ethernet chip is configured in a slightly
non-standard way. Its SoC has an address space usually reserved
for a NOR-flash device. However, on the Snowball, that external
bus is populated by the SMSC9115 Ethernet chip. So, to power on
the Ethernet chip, we have to enable the GPIO controlled
regulator which usually controls the NOR-flash. In this patch
we inform the Snowball's Device Tree which GPIO is used to
operate it.

Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
 arch/arm/boot/dts/snowball.dts |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 27f31a5..4733a96 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -134,6 +134,7 @@
 				reg = <0 0x10000>;
 				interrupts = <12 0x1>;
 				interrupt-parent = <&gpio4>;
+
 				vdd33a-supply = <&en_3v3_reg>;
 				vddvario-supply = <&db8500_vape_reg>;
 
@@ -153,6 +154,7 @@
 			bus-width = <4>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&vmmci>;
 
 			cd-gpios  = <&gpio6 26 0x4>; // 218
 			cd-inverted;
@@ -346,5 +348,12 @@
 				};
 			};
 		};
+
+		vmmci: regulator-gpio {
+			gpios = <&gpio7 4 0x4>;        // 228
+			enable-gpio = <&gpio6 25 0x4>; // 217
+
+			status = "okay";
+		};
 	};
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/