| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1358859643-5030-2-git-send-email-gautam.vivek@samsung.com>
Date: Tue, 22 Jan 2013 18:30:40 +0530
From: Vivek Gautam <gautam.vivek@...sung.com>
To: linux-usb@...r.kernel.org
Cc: devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, gregkh@...uxfoundation.org,
balbi@...com, stern@...land.harvard.edu, kgene.kim@...sung.com,
thomas.abraham@...aro.org, rob.herring@...xeda.com,
grant.likely@...retlab.ca, sylvester.nawrocki@...il.com,
dianders@...omium.org, jg1.han@...sung.com, p.paneri@...sung.com
Subject: [PATCH v8 1/4] ARM: EXYNOS: Update & move usb-phy types to generic
include layer
Updating the names of usb-phy types to more generic names:
USB_PHY_TYPE_DEIVCE & USB_PHY_TYPE_HOST; and further update
its dependencies.
Signed-off-by: Praveen Paneri <p.paneri@...sung.com>
Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com>
Acked-by: Kukjin Kim <kgene.kim@...sung.com>
---
drivers/usb/host/ehci-s5p.c | 9 +++++----
drivers/usb/host/ohci-exynos.c | 9 +++++----
include/linux/usb/samsung_usb_phy.h | 16 ++++++++++++++++
3 files changed, 26 insertions(+), 8 deletions(-)
create mode 100644 include/linux/usb/samsung_usb_phy.h
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 319dcfa..46ca5ef 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -17,6 +17,7 @@
#include <linux/platform_device.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/usb-ehci-s5p.h>
+#include <linux/usb/samsung_usb_phy.h>
#include <plat/usb-phy.h>
#define EHCI_INSNREG00(base) (base + 0x90)
@@ -164,7 +165,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
}
if (pdata->phy_init)
- pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+ pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
@@ -198,7 +199,7 @@ static int s5p_ehci_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
if (pdata && pdata->phy_exit)
- pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+ pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
clk_disable_unprepare(s5p_ehci->clk);
@@ -229,7 +230,7 @@ static int s5p_ehci_suspend(struct device *dev)
rc = ehci_suspend(hcd, do_wakeup);
if (pdata && pdata->phy_exit)
- pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+ pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
clk_disable_unprepare(s5p_ehci->clk);
@@ -246,7 +247,7 @@ static int s5p_ehci_resume(struct device *dev)
clk_prepare_enable(s5p_ehci->clk);
if (pdata && pdata->phy_init)
- pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+ pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
/* DMA burst Enable */
writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index aa3b884..804fb62 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -15,6 +15,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb-exynos.h>
+#include <linux/usb/samsung_usb_phy.h>
#include <plat/usb-phy.h>
struct exynos_ohci_hcd {
@@ -153,7 +154,7 @@ static int exynos_ohci_probe(struct platform_device *pdev)
}
if (pdata->phy_init)
- pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+ pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
@@ -184,7 +185,7 @@ static int exynos_ohci_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
if (pdata && pdata->phy_exit)
- pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+ pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
clk_disable_unprepare(exynos_ohci->clk);
@@ -229,7 +230,7 @@ static int exynos_ohci_suspend(struct device *dev)
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
if (pdata && pdata->phy_exit)
- pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+ pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
clk_disable_unprepare(exynos_ohci->clk);
@@ -249,7 +250,7 @@ static int exynos_ohci_resume(struct device *dev)
clk_prepare_enable(exynos_ohci->clk);
if (pdata && pdata->phy_init)
- pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+ pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
ohci_resume(hcd, false);
diff --git a/include/linux/usb/samsung_usb_phy.h b/include/linux/usb/samsung_usb_phy.h
new file mode 100644
index 0000000..9167826
--- /dev/null
+++ b/include/linux/usb/samsung_usb_phy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * http://www.samsung.com/
+ *
+ * Defines phy types for samsung usb phy controllers - HOST or DEIVCE.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+enum samsung_usb_phy_type {
+ USB_PHY_TYPE_DEVICE,
+ USB_PHY_TYPE_HOST,
+};
--
1.7.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists