| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1358864989-4859-2-git-send-email-mark.einon@gmail.com>
Date: Tue, 22 Jan 2013 14:29:48 +0000
From: Mark Einon <mark.einon@...il.com>
To: gregkh@...uxfoundation.org
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Mark Einon <mark.einon@...il.com>
Subject: [PATCH 2/3] staging: et131x: Trivial camel case fixes
Checkpatch now highlights some camel case flag names. Fix these issues.
Also fix some remaining lines > 80chars issues for completeness.
Signed-off-by: Mark Einon <mark.einon@...il.com>
---
drivers/staging/et131x/et131x.c | 50 ++++++++++++++++++++-------------------
1 file changed, 26 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 2b2f315..6db6d01 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -139,19 +139,19 @@ MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver for the ET1310 by Agere S
#define NIC_SEND_HANG_THRESHOLD 0
/* MP_TCB flags */
-#define fMP_DEST_MULTI 0x00000001
-#define fMP_DEST_BROAD 0x00000002
+#define FMP_DEST_MULTI 0x00000001
+#define FMP_DEST_BROAD 0x00000002
/* MP_ADAPTER flags */
-#define fMP_ADAPTER_INTERRUPT_IN_USE 0x00000008
+#define FMP_ADAPTER_INTERRUPT_IN_USE 0x00000008
/* MP_SHARED flags */
-#define fMP_ADAPTER_LOWER_POWER 0x00200000
+#define FMP_ADAPTER_LOWER_POWER 0x00200000
-#define fMP_ADAPTER_NON_RECOVER_ERROR 0x00800000
-#define fMP_ADAPTER_HARDWARE_ERROR 0x04000000
+#define FMP_ADAPTER_NON_RECOVER_ERROR 0x00800000
+#define FMP_ADAPTER_HARDWARE_ERROR 0x04000000
-#define fMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000
+#define FMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000
/* Some offsets in PCI config space that are actually used. */
#define ET1310_PCI_MAC_ADDRESS 0xA4
@@ -1062,7 +1062,7 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter)
writel(ctl, &adapter->regs->txmac.ctl);
/* Ready to start the RXDMA/TXDMA engine */
- if (adapter->flags & fMP_ADAPTER_LOWER_POWER) {
+ if (adapter->flags & FMP_ADAPTER_LOWER_POWER) {
et131x_rx_dma_enable(adapter);
et131x_tx_dma_enable(adapter);
}
@@ -2068,7 +2068,7 @@ static void et131x_enable_txrx(struct net_device *netdev)
et131x_tx_dma_enable(adapter);
/* Enable device interrupts */
- if (adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE)
+ if (adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE)
et131x_enable_interrupts(adapter);
/* We're ready to move some data, so start the queue */
@@ -2167,7 +2167,7 @@ static void et1310_enable_phy_coma(struct et131x_adapter *adapter)
/* Stop sending packets. */
spin_lock_irqsave(&adapter->send_hw_lock, flags);
- adapter->flags |= fMP_ADAPTER_LOWER_POWER;
+ adapter->flags |= FMP_ADAPTER_LOWER_POWER;
spin_unlock_irqrestore(&adapter->send_hw_lock, flags);
/* Wait for outstanding Receive packets */
@@ -2220,7 +2220,7 @@ static void et1310_disable_phy_coma(struct et131x_adapter *adapter)
et131x_adapter_setup(adapter);
/* Allow Tx to restart */
- adapter->flags &= ~fMP_ADAPTER_LOWER_POWER;
+ adapter->flags &= ~FMP_ADAPTER_LOWER_POWER;
et131x_enable_txrx(adapter->netdev);
}
@@ -3041,13 +3041,15 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb)
if (phydev && phydev->speed == SPEED_1000) {
if (++adapter->tx_ring.since_irq == PARM_TX_NUM_BUFS_DEF) {
/* Last element & Interrupt flag */
- desc[frag - 1].flags = TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT;
+ desc[frag - 1].flags =
+ TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT;
adapter->tx_ring.since_irq = 0;
} else { /* Last element */
desc[frag - 1].flags = TXDESC_FLAG_LASTPKT;
}
} else
- desc[frag - 1].flags = TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT;
+ desc[frag - 1].flags =
+ TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT;
desc[0].flags |= TXDESC_FLAG_FIRSTPKT;
@@ -3168,9 +3170,9 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter)
if ((shbufva[0] == 0xffff) &&
(shbufva[1] == 0xffff) && (shbufva[2] == 0xffff)) {
- tcb->flags |= fMP_DEST_BROAD;
+ tcb->flags |= FMP_DEST_BROAD;
} else if ((shbufva[0] & 0x3) == 0x0001) {
- tcb->flags |= fMP_DEST_MULTI;
+ tcb->flags |= FMP_DEST_MULTI;
}
}
@@ -3225,7 +3227,7 @@ static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev)
/* We need to see if the link is up; if it's not, make the
* netif layer think we're good and drop the packet
*/
- if ((adapter->flags & fMP_ADAPTER_FAIL_SEND_MASK) ||
+ if ((adapter->flags & FMP_ADAPTER_FAIL_SEND_MASK) ||
!netif_carrier_ok(netdev)) {
dev_kfree_skb_any(skb);
skb = NULL;
@@ -3262,9 +3264,9 @@ static inline void free_send_packet(struct et131x_adapter *adapter,
struct net_device_stats *stats = &adapter->net_stats;
u64 dma_addr;
- if (tcb->flags & fMP_DEST_BROAD)
+ if (tcb->flags & FMP_DEST_BROAD)
atomic_inc(&adapter->stats.broadcast_pkts_xmtd);
- else if (tcb->flags & fMP_DEST_MULTI)
+ else if (tcb->flags & FMP_DEST_MULTI)
atomic_inc(&adapter->stats.multicast_pkts_xmtd);
else
atomic_inc(&adapter->stats.unicast_pkts_xmtd);
@@ -4351,7 +4353,7 @@ static void et131x_isr_handler(struct work_struct *work)
* to do is disable the interrupts and set the flag to cause us
* to reset so we can solve this issue.
*/
- /* MP_SET_FLAG( adapter, fMP_ADAPTER_HARDWARE_ERROR); */
+ /* MP_SET_FLAG( adapter, FMP_ADAPTER_HARDWARE_ERROR); */
dev_warn(&adapter->pdev->dev,
"RXMAC interrupt, error 0x%08x. Requesting reset\n",
@@ -4466,7 +4468,7 @@ static int et131x_open(struct net_device *netdev)
return result;
}
- adapter->flags |= fMP_ADAPTER_INTERRUPT_IN_USE;
+ adapter->flags |= FMP_ADAPTER_INTERRUPT_IN_USE;
et131x_up(netdev);
@@ -4485,7 +4487,7 @@ static int et131x_close(struct net_device *netdev)
et131x_down(netdev);
- adapter->flags &= ~fMP_ADAPTER_INTERRUPT_IN_USE;
+ adapter->flags &= ~FMP_ADAPTER_INTERRUPT_IN_USE;
free_irq(adapter->pdev->irq, netdev);
/* Stop the error timer */
@@ -4695,17 +4697,17 @@ static void et131x_tx_timeout(struct net_device *netdev)
unsigned long flags;
/* If the device is closed, ignore the timeout */
- if (~(adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE))
+ if (~(adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE))
return;
/* Any nonrecoverable hardware error?
* Checks adapter->flags for any failure in phy reading
*/
- if (adapter->flags & fMP_ADAPTER_NON_RECOVER_ERROR)
+ if (adapter->flags & FMP_ADAPTER_NON_RECOVER_ERROR)
return;
/* Hardware failure? */
- if (adapter->flags & fMP_ADAPTER_HARDWARE_ERROR) {
+ if (adapter->flags & FMP_ADAPTER_HARDWARE_ERROR) {
dev_err(&adapter->pdev->dev, "hardware error - reset\n");
return;
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists