| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1358874762-19717-5-git-send-email-mgorman@suse.de>
Date: Tue, 22 Jan 2013 17:12:40 +0000
From: Mel Gorman <mgorman@...e.de>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@...llo.nl>,
Andrea Arcangeli <aarcange@...hat.com>,
Ingo Molnar <mingo@...nel.org>,
Simon Jeons <simon.jeons@...il.com>,
Wanpeng Li <liwanp@...ux.vnet.ibm.com>,
Hugh Dickins <hughd@...gle.com>, Mel Gorman <mgorman@...e.de>,
Linux-MM <linux-mm@...ck.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH 4/6] mm: Move page flags layout to separate header
From: Peter Zijlstra <a.p.zijlstra@...llo.nl>
This is a preparation patch for moving page->_last_nid into page->flags
that moves page flag layout information to a separate header. This patch
is necessary because otherwise there would be a circular dependency
between mm_types.h and mm.h.
Signed-off-by: Mel Gorman <mgorman@...e.de>
---
include/linux/mm.h | 40 ---------------------
include/linux/mm_types.h | 1 +
include/linux/mmzone.h | 22 +-----------
include/linux/page-flags-layout.h | 71 +++++++++++++++++++++++++++++++++++++
4 files changed, 73 insertions(+), 61 deletions(-)
create mode 100644 include/linux/page-flags-layout.h
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 66e2f7c..87420e6 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -580,52 +580,12 @@ static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
* sets it, so none of the operations on it need to be atomic.
*/
-
-/*
- * page->flags layout:
- *
- * There are three possibilities for how page->flags get
- * laid out. The first is for the normal case, without
- * sparsemem. The second is for sparsemem when there is
- * plenty of space for node and section. The last is when
- * we have run out of space and have to fall back to an
- * alternate (slower) way of determining the node.
- *
- * No sparsemem or sparsemem vmemmap: | NODE | ZONE | ... | FLAGS |
- * classic sparse with space for node:| SECTION | NODE | ZONE | ... | FLAGS |
- * classic sparse no space for node: | SECTION | ZONE | ... | FLAGS |
- */
-#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
-#define SECTIONS_WIDTH SECTIONS_SHIFT
-#else
-#define SECTIONS_WIDTH 0
-#endif
-
-#define ZONES_WIDTH ZONES_SHIFT
-
-#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT <= BITS_PER_LONG - NR_PAGEFLAGS
-#define NODES_WIDTH NODES_SHIFT
-#else
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-#error "Vmemmap: No space for nodes field in page flags"
-#endif
-#define NODES_WIDTH 0
-#endif
-
/* Page flags: | [SECTION] | [NODE] | ZONE | ... | FLAGS | */
#define SECTIONS_PGOFF ((sizeof(unsigned long)*8) - SECTIONS_WIDTH)
#define NODES_PGOFF (SECTIONS_PGOFF - NODES_WIDTH)
#define ZONES_PGOFF (NODES_PGOFF - ZONES_WIDTH)
/*
- * We are going to use the flags for the page to node mapping if its in
- * there. This includes the case where there is no node, so it is implicit.
- */
-#if !(NODES_WIDTH > 0 || NODES_SHIFT == 0)
-#define NODE_NOT_IN_PAGE_FLAGS
-#endif
-
-/*
* Define the bit shifts to access each section. For non-existent
* sections we define the shift as 0; that plus a 0 mask ensures
* the compiler will optimise away reference to them.
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 47047cb..d05d632 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -12,6 +12,7 @@
#include <linux/cpumask.h>
#include <linux/page-debug-flags.h>
#include <linux/uprobes.h>
+#include <linux/page-flags-layout.h>
#include <asm/page.h>
#include <asm/mmu.h>
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 73b64a3..5e6a814 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -15,7 +15,7 @@
#include <linux/seqlock.h>
#include <linux/nodemask.h>
#include <linux/pageblock-flags.h>
-#include <generated/bounds.h>
+#include <linux/page-flags-layout.h>
#include <linux/atomic.h>
#include <asm/page.h>
@@ -308,24 +308,6 @@ enum zone_type {
#ifndef __GENERATING_BOUNDS_H
-/*
- * When a memory allocation must conform to specific limitations (such
- * as being suitable for DMA) the caller will pass in hints to the
- * allocator in the gfp_mask, in the zone modifier bits. These bits
- * are used to select a priority ordered list of memory zones which
- * match the requested limits. See gfp_zone() in include/linux/gfp.h
- */
-
-#if MAX_NR_ZONES < 2
-#define ZONES_SHIFT 0
-#elif MAX_NR_ZONES <= 2
-#define ZONES_SHIFT 1
-#elif MAX_NR_ZONES <= 4
-#define ZONES_SHIFT 2
-#else
-#error ZONES_SHIFT -- too many zones configured adjust calculation
-#endif
-
struct zone {
/* Fields commonly accessed by the page allocator */
@@ -1053,8 +1035,6 @@ static inline unsigned long early_pfn_to_nid(unsigned long pfn)
* PA_SECTION_SHIFT physical address to/from section number
* PFN_SECTION_SHIFT pfn to/from section number
*/
-#define SECTIONS_SHIFT (MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)
-
#define PA_SECTION_SHIFT (SECTION_SIZE_BITS)
#define PFN_SECTION_SHIFT (SECTION_SIZE_BITS - PAGE_SHIFT)
diff --git a/include/linux/page-flags-layout.h b/include/linux/page-flags-layout.h
new file mode 100644
index 0000000..316805d
--- /dev/null
+++ b/include/linux/page-flags-layout.h
@@ -0,0 +1,71 @@
+#ifndef PAGE_FLAGS_LAYOUT_H
+#define PAGE_FLAGS_LAYOUT_H
+
+#include <linux/numa.h>
+#include <generated/bounds.h>
+
+/*
+ * When a memory allocation must conform to specific limitations (such
+ * as being suitable for DMA) the caller will pass in hints to the
+ * allocator in the gfp_mask, in the zone modifier bits. These bits
+ * are used to select a priority ordered list of memory zones which
+ * match the requested limits. See gfp_zone() in include/linux/gfp.h
+ */
+#if MAX_NR_ZONES < 2
+#define ZONES_SHIFT 0
+#elif MAX_NR_ZONES <= 2
+#define ZONES_SHIFT 1
+#elif MAX_NR_ZONES <= 4
+#define ZONES_SHIFT 2
+#else
+#error ZONES_SHIFT -- too many zones configured adjust calculation
+#endif
+
+#ifdef CONFIG_SPARSEMEM
+#include <asm/sparsemem.h>
+
+/* SECTION_SHIFT #bits space required to store a section # */
+#define SECTIONS_SHIFT (MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)
+
+#endif /* CONFIG_SPARSEMEM */
+
+/*
+ * page->flags layout:
+ *
+ * There are three possibilities for how page->flags get
+ * laid out. The first is for the normal case, without
+ * sparsemem. The second is for sparsemem when there is
+ * plenty of space for node and section. The last is when
+ * we have run out of space and have to fall back to an
+ * alternate (slower) way of determining the node.
+ *
+ * No sparsemem or sparsemem vmemmap: | NODE | ZONE | ... | FLAGS |
+ * classic sparse with space for node:| SECTION | NODE | ZONE | ... | FLAGS |
+ * classic sparse no space for node: | SECTION | ZONE | ... | FLAGS |
+ */
+#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
+#define SECTIONS_WIDTH SECTIONS_SHIFT
+#else
+#define SECTIONS_WIDTH 0
+#endif
+
+#define ZONES_WIDTH ZONES_SHIFT
+
+#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT <= BITS_PER_LONG - NR_PAGEFLAGS
+#define NODES_WIDTH NODES_SHIFT
+#else
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+#error "Vmemmap: No space for nodes field in page flags"
+#endif
+#define NODES_WIDTH 0
+#endif
+
+/*
+ * We are going to use the flags for the page to node mapping if its in
+ * there. This includes the case where there is no node, so it is implicit.
+ */
+#if !(NODES_WIDTH > 0 || NODES_SHIFT == 0)
+#define NODE_NOT_IN_PAGE_FLAGS
+#endif
+
+#endif /* _LINUX_PAGE_FLAGS_LAYOUT */
--
1.7.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists