[ 0.000000] Linux version 3.7.4-default (root@vostro) (gcc version 4.6.3 (Gentoo 4.6.3 p1.8, pie-0.5.2) ) #2 SMP Mon Jan 21 22:45:22 MET 2013 [ 0.000000] Command line: root=/dev/sda5 pciehp.pciehp_debug=1 slub_debug=AFPZ pcie_aspm=off [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da4e4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da4e5000-0x00000000da527fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da528000-0x00000000da792fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da793000-0x00000000da966fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da967000-0x00000000daa88fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000daa89000-0x00000000dad67fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Vostro 3550/, BIOS A11 08/03/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FE0000000 write-back [ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdaa89 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaa88fff] [ 0.000000] [mem 0x00000000-0xda9fffff] page 2M [ 0.000000] [mem 0xdaa00000-0xdaa88fff] page 4k [ 0.000000] kernel direct mapping tables up to 0xdaa88fff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x41fdfffff] [ 0.000000] [mem 0x100000000-0x41fdfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x41fdfffff @ [mem 0xdaa7b000-0xdaa88fff] [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL) [ 0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000daff1d38 000F4 (v04 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000dafe8180 09BB6 (v02 DELL WN09 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dafe3f80 00040 [ 0.000000] ACPI: APIC 00000000daff1e30 00072 (v03 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000daff1ea8 0003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000daff1ee8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112) [ 0.000000] ACPI: SLIC 00000000daff2398 00176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: HPET 00000000daff2510 00038 (v01 DELL WN09 01072009 AMI. 00000004) [ 0.000000] ACPI: SSDT 00000000daff2548 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000daff2d90 00996 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR 00000000daff3728 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: OSFR 00000000daff3810 00086 (v01 DELL M08 07DC0803 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fdfffff] [ 0.000000] NODE_DATA [mem 0x41fdd9000-0x41fdfffff] [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xda4e4fff] [ 0.000000] node 0: [mem 0xda528000-0xda792fff] [ 0.000000] node 0: [mem 0xda967000-0xdaa88fff] [ 0.000000] node 0: [mem 0x100000000-0x41fdfffff] [ 0.000000] On node 0 totalpages: 4170239 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 141 pages reserved [ 0.000000] DMA zone: 3776 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 873650 pages, LIFO batch:31 [ 0.000000] Normal zone: 51192 pages used for memmap [ 0.000000] Normal zone: 3225096 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 2 reached. Processor 2/0x1 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 2 reached. Processor 3/0x3 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000 [ 0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000 [ 0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000 [ 0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000 [ 0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000 [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000 [ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000 [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000 [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88041fa00000 s74560 r8192 d23744 u1048576 [ 0.000000] pcpu-alloc: s74560 r8192 d23744 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4102522 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1 slub_debug=AFPZ pcie_aspm=off [ 0.000000] PCIe ASPM is disabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16328852k/17299456k available (6020k kernel code, 618500k absent, 352104k reserved, 3886k data, 688k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.010000] tsc: Detected 2793.665 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.33 BogoMIPS (lpj=27936650) [ 0.000190] pid_max: default: 32768 minimum: 301 [ 0.001827] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.004979] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006368] Mount-cache hash table entries: 256 [ 0.008168] CPU: Physical Processor ID: 0 [ 0.008260] CPU: Processor Core ID: 0 [ 0.008352] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.008504] mce: CPU supports 7 MCE banks [ 0.008606] CPU0: Thermal monitoring enabled (TM1) [ 0.008706] process: using mwait in idle threads [ 0.008799] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.009110] Freeing SMP alternatives: 16k freed [ 0.009209] ACPI: Core revision 20120913 [ 0.240304] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.340258] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07) [ 0.456110] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.456416] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.456518] ... version: 3 [ 0.456608] ... bit width: 48 [ 0.456698] ... generic registers: 4 [ 0.456789] ... value mask: 0000ffffffffffff [ 0.456881] ... max period: 000000007fffffff [ 0.456974] ... fixed-purpose events: 3 [ 0.457064] ... event mask: 000000070000000f [ 0.458655] SMP alternatives: lockdep: fixing up alternatives [ 0.458762] smpboot: Booting Node 0, Processors #1 OK [ 0.472087] Brought up 2 CPUs [ 0.472179] smpboot: Total of 2 processors activated (11174.66 BogoMIPS) [ 0.473956] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.475184] devtmpfs: initialized [ 0.477369] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes) [ 0.477743] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes) [ 0.480690] xor: automatically using best checksumming function: [ 0.575932] avx : 19552.000 MB/sec [ 0.577675] regulator-dummy: no parameters [ 0.578596] NET: Registered protocol family 16 [ 0.582224] ACPI: bus type pci registered [ 0.583232] dca service started, version 1.12.1 [ 0.583537] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.583684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.591043] PCI: Using configuration type 1 for base access [ 0.644690] bio: create slab at 0 [ 0.805588] raid6: sse2x1 7553 MB/s [ 0.975327] raid6: sse2x2 9341 MB/s [ 1.145070] raid6: sse2x4 10796 MB/s [ 1.145071] raid6: using algorithm sse2x4 (10796 MB/s) [ 1.145072] raid6: using ssse3x2 recovery algorithm [ 1.145202] ACPI: Added _OSI(Module Device) [ 1.145300] ACPI: Added _OSI(Processor Device) [ 1.145400] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.145501] ACPI: Added _OSI(Processor Aggregator Device) [ 1.151487] ACPI: EC: Look up EC in DSDT [ 1.162173] ACPI: Executed 1 blocks of module-level executable AML code [ 1.270145] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.331032] ACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 1.334258] ACPI: Dynamic OEM Table Load: [ 1.334261] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 1.363303] ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 1.368167] ACPI: Dynamic OEM Table Load: [ 1.368169] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 1.407626] ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 1.410255] ACPI: Dynamic OEM Table Load: [ 1.410257] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 1.438684] ACPI: Interpreter enabled [ 1.438778] ACPI: (supports S0 S1 S3 S4 S5) [ 1.439458] ACPI: Using IOAPIC for interrupt routing [ 1.709643] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.722032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.738471] PCI host bridge to bus 0000:00 [ 1.738572] pci_bus 0000:00: root bus resource [bus 00-3e] [ 1.738673] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.738773] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.738874] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.738976] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 1.739078] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 1.739179] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 1.739280] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 1.739382] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 1.739482] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 1.739584] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 1.739686] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 1.739789] pci_bus 0000:00: scanning bus [ 1.739827] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 1.739834] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0xa [ 1.739928] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 1.739944] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit] [ 1.739952] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.739958] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 1.740074] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 1.740115] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit] [ 1.740246] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.740270] pci 0000:00:16.0: PME# disabled [ 1.740339] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 1.740374] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff] [ 1.740530] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.740535] pci 0000:00:1a.0: PME# disabled [ 1.740589] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 1.740618] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit] [ 1.740757] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.740763] pci 0000:00:1b.0: PME# disabled [ 1.740810] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 1.740880] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x1d [ 1.740963] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.740969] pci 0000:00:1c.0: PME# disabled [ 1.741021] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 1.741089] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x1d [ 1.741172] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.741178] pci 0000:00:1c.1: PME# disabled [ 1.741232] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 1.741299] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x1d [ 1.741384] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.741389] pci 0000:00:1c.3: PME# disabled [ 1.741439] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 1.741508] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x1d [ 1.741591] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.741596] pci 0000:00:1c.4: PME# disabled [ 1.741654] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 1.741721] pci 0000:00:1c.7: calling pci_fixup_transparent_bridge+0x0/0x1d [ 1.741804] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.741810] pci 0000:00:1c.7: PME# disabled [ 1.741866] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 1.741901] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff] [ 1.742057] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.742062] pci 0000:00:1d.0: PME# disabled [ 1.742110] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100 [ 1.742322] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 1.742359] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7] [ 1.742374] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3] [ 1.742388] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097] [ 1.742402] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083] [ 1.742416] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 1.742431] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff] [ 1.742530] pci 0000:00:1f.2: PME# supported from D3hot [ 1.742535] pci 0000:00:1f.2: PME# disabled [ 1.742578] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 1.742606] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit] [ 1.742646] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 1.742701] pci_bus 0000:00: fixups for bus [ 1.742705] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 0 [ 1.742792] pci_bus 0000:03: scanning bus [ 1.742795] pci_bus 0000:03: fixups for bus [ 1.742797] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 1.742905] pci_bus 0000:03: bus scan returning with max=03 [ 1.742911] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 0 [ 1.742997] pci_bus 0000:05: scanning bus [ 1.743043] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 1.743071] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff] [ 1.743118] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref] [ 1.743147] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref] [ 1.743283] pci 0000:05:00.0: supports D1 D2 [ 1.743285] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.743291] pci 0000:05:00.0: PME# disabled [ 1.760895] pci_bus 0000:05: fixups for bus [ 1.760897] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 1.760993] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 1.761006] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref] [ 1.761008] pci_bus 0000:05: bus scan returning with max=05 [ 1.761014] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 0 [ 1.761102] pci_bus 0000:09: scanning bus [ 1.761404] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000 [ 1.761757] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit] [ 1.763436] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 1.763486] pci 0000:09:00.0: PME# disabled [ 1.780218] pci_bus 0000:09: fixups for bus [ 1.780220] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 1.780321] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff] [ 1.780330] pci_bus 0000:09: bus scan returning with max=09 [ 1.780336] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 0 [ 1.780423] pci_bus 0000:0b: scanning bus [ 1.780482] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330 [ 1.780518] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit] [ 1.780547] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit] [ 1.780707] pci 0000:0b:00.0: supports D1 D2 [ 1.780709] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.780716] pci 0000:0b:00.0: PME# disabled [ 1.780796] pci_bus 0000:0b: fixups for bus [ 1.780798] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c] [ 1.780898] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] [ 1.780907] pci_bus 0000:0b: bus scan returning with max=0b [ 1.780913] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 0 [ 1.781005] pci_bus 0000:11: scanning bus [ 1.781057] pci 0000:11:00.0: [1095:3132] type 00 class 0x018000 [ 1.781098] pci 0000:11:00.0: reg 10: [mem 0xf6c84000-0xf6c8407f 64bit] [ 1.781131] pci 0000:11:00.0: reg 18: [mem 0xf6c80000-0xf6c83fff 64bit] [ 1.781152] pci 0000:11:00.0: reg 20: [io 0xc000-0xc07f] [ 1.781194] pci 0000:11:00.0: reg 30: [mem 0xf6c00000-0xf6c7ffff pref] [ 1.781308] pci 0000:11:00.0: supports D1 D2 [ 1.800064] pci_bus 0000:11: fixups for bus [ 1.800070] pci 0000:00:1c.7: PCI bridge to [bus 11-16] [ 1.800197] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff] [ 1.800203] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff] [ 1.800212] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref] [ 1.800214] pci_bus 0000:11: bus scan returning with max=11 [ 1.800219] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 1 [ 1.800229] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 1 [ 1.800238] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 1 [ 1.800247] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 1 [ 1.800256] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 1 [ 1.800263] pci_bus 0000:00: bus scan returning with max=16 [ 1.800284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.807394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.808669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 1.810020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 1.811326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 1.813092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] [ 1.817776] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19) [ 1.994281] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.995923] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.997546] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.999164] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.001930] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.003622] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.005309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.006915] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.009907] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.011332] vgaarb: loaded [ 2.011421] vgaarb: bridge control possible 0000:00:02.0 [ 2.018426] SCSI subsystem initialized [ 2.018524] ACPI: bus type scsi registered [ 2.019169] libata version 3.00 loaded. [ 2.019762] ACPI: bus type usb registered [ 2.020345] usbcore: registered new interface driver usbfs [ 2.020663] usbcore: registered new interface driver hub [ 2.020983] usbcore: registered new device driver usb [ 2.021659] media: Linux media interface: v0.10 [ 2.021968] Linux video capture interface: v2.00 [ 2.025887] wmi: Mapper loaded [ 2.026341] Advanced Linux Sound Architecture Driver Initialized. [ 2.026435] PCI: Using ACPI for IRQ routing [ 2.028837] PCI: pci_cache_line_size set to 64 bytes [ 2.028849] pci 0000:00:02.0: BAR 0: reserving [mem 0xf6800000-0xf6bfffff flags 0x140204] (d=0, p=0) [ 2.028852] pci 0000:00:02.0: BAR 2: reserving [mem 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0) [ 2.028854] pci 0000:00:02.0: BAR 4: reserving [io 0xf000-0xf03f flags 0x40101] (d=0, p=0) [ 2.028859] pci 0000:00:16.0: BAR 0: reserving [mem 0xf7f0a000-0xf7f0a00f flags 0x140204] (d=0, p=0) [ 2.028864] pci 0000:00:1a.0: BAR 0: reserving [mem 0xf7f08000-0xf7f083ff flags 0x40200] (d=0, p=0) [ 2.028869] pci 0000:00:1b.0: BAR 0: reserving [mem 0xf7f00000-0xf7f03fff flags 0x140204] (d=0, p=0) [ 2.028886] pci 0000:00:1d.0: BAR 0: reserving [mem 0xf7f07000-0xf7f073ff flags 0x40200] (d=0, p=0) [ 2.028893] pci 0000:00:1f.2: BAR 0: reserving [io 0xf0b0-0xf0b7 flags 0x40101] (d=0, p=0) [ 2.028895] pci 0000:00:1f.2: BAR 1: reserving [io 0xf0a0-0xf0a3 flags 0x40101] (d=0, p=0) [ 2.028897] pci 0000:00:1f.2: BAR 2: reserving [io 0xf090-0xf097 flags 0x40101] (d=0, p=0) [ 2.028899] pci 0000:00:1f.2: BAR 3: reserving [io 0xf080-0xf083 flags 0x40101] (d=0, p=0) [ 2.028901] pci 0000:00:1f.2: BAR 4: reserving [io 0xf060-0xf07f flags 0x40101] (d=0, p=0) [ 2.028903] pci 0000:00:1f.2: BAR 5: reserving [mem 0xf7f06000-0xf7f067ff flags 0x40200] (d=0, p=0) [ 2.028906] pci 0000:00:1f.3: BAR 0: reserving [mem 0xf7f05000-0xf7f050ff flags 0x140204] (d=0, p=0) [ 2.028909] pci 0000:00:1f.3: BAR 4: reserving [io 0xf040-0xf05f flags 0x40101] (d=0, p=0) [ 2.028914] pci 0000:05:00.0: BAR 0: reserving [io 0xe000-0xe0ff flags 0x40101] (d=0, p=0) [ 2.028916] pci 0000:05:00.0: BAR 2: reserving [mem 0xf1104000-0xf1104fff flags 0x14220c] (d=0, p=0) [ 2.028918] pci 0000:05:00.0: BAR 4: reserving [mem 0xf1100000-0xf1103fff flags 0x14220c] (d=0, p=0) [ 2.028947] pci 0000:09:00.0: BAR 0: reserving [mem 0xf7e00000-0xf7e01fff flags 0x140204] (d=0, p=0) [ 2.028955] pci 0000:0b:00.0: BAR 0: reserving [mem 0xf7d00000-0xf7d0ffff flags 0x140204] (d=0, p=0) [ 2.028957] pci 0000:0b:00.0: BAR 2: reserving [mem 0xf7d10000-0xf7d11fff flags 0x140204] (d=0, p=0) [ 2.028963] pci 0000:11:00.0: BAR 0: reserving [mem 0xf6c84000-0xf6c8407f flags 0x140204] (d=0, p=0) [ 2.028965] pci 0000:11:00.0: BAR 2: reserving [mem 0xf6c80000-0xf6c83fff flags 0x140204] (d=0, p=0) [ 2.028967] pci 0000:11:00.0: BAR 4: reserving [io 0xc000-0xc07f flags 0x40101] (d=0, p=0) [ 2.029041] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 2.029060] e820: reserve RAM buffer [mem 0xda4e5000-0xdbffffff] [ 2.029067] e820: reserve RAM buffer [mem 0xda793000-0xdbffffff] [ 2.029075] e820: reserve RAM buffer [mem 0xdaa89000-0xdbffffff] [ 2.029083] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff] [ 2.031223] Bluetooth: Core ver 2.16 [ 2.031498] NET: Registered protocol family 31 [ 2.031588] Bluetooth: HCI device and connection manager initialized [ 2.031705] Bluetooth: HCI socket layer initialized [ 2.031811] Bluetooth: L2CAP socket layer initialized [ 2.031946] Bluetooth: SCO socket layer initialized [ 2.033015] cfg80211: Calling CRDA to update world regulatory domain [ 2.033821] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.034269] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.036377] Switching to clocksource hpet [ 2.037134] pnp: PnP ACPI init [ 2.037330] ACPI: bus type pnp registered [ 2.045069] pnp 00:00: [bus 00-3e] [ 2.045077] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.045083] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.045090] pnp 00:00: [io 0x0d00-0xffff window] [ 2.045097] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.045103] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 2.045109] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 2.045115] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 2.045121] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 2.045128] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 2.045135] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 2.045142] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 2.045148] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 2.045154] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 2.045160] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 2.045167] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 2.045173] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 2.045179] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 2.045185] pnp 00:00: [mem 0xdfa00000-0xfeafffff window] [ 2.045191] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 2.045606] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 2.045764] pnp 00:01: [io 0x0000-0x001f] [ 2.045771] pnp 00:01: [io 0x0081-0x0091] [ 2.045778] pnp 00:01: [io 0x0093-0x009f] [ 2.045784] pnp 00:01: [io 0x00c0-0x00df] [ 2.045791] pnp 00:01: [dma 4] [ 2.046134] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.046253] pnp 00:02: [mem 0xff000000-0xffffffff] [ 2.046682] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 2.047927] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 2.048265] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.048413] pnp 00:04: [io 0x002e-0x002f] [ 2.048419] pnp 00:04: [io 0x004e-0x004f] [ 2.048425] pnp 00:04: [io 0x0061] [ 2.048431] pnp 00:04: [io 0x0063] [ 2.048437] pnp 00:04: [io 0x0065] [ 2.048444] pnp 00:04: [io 0x0067] [ 2.048450] pnp 00:04: [io 0x0070] [ 2.048456] pnp 00:04: [io 0x0080] [ 2.048462] pnp 00:04: [io 0x0092] [ 2.048468] pnp 00:04: [io 0x00b2-0x00b3] [ 2.048474] pnp 00:04: [io 0x0680-0x069f] [ 2.048480] pnp 00:04: [io 0x1000-0x100f] [ 2.048485] pnp 00:04: [io 0xffff] [ 2.048493] pnp 00:04: [io 0xffff] [ 2.048499] pnp 00:04: [io 0x0400-0x0453] [ 2.048505] pnp 00:04: [io 0x0458-0x047f] [ 2.048512] pnp 00:04: [io 0x0500-0x057f] [ 2.048518] pnp 00:04: [io 0x164e-0x164f] [ 2.048926] system 00:04: [io 0x0680-0x069f] has been reserved [ 2.049037] system 00:04: [io 0x1000-0x100f] has been reserved [ 2.049144] system 00:04: [io 0xffff] has been reserved [ 2.049251] system 00:04: [io 0xffff] has been reserved [ 2.049358] system 00:04: [io 0x0400-0x0453] has been reserved [ 2.049467] system 00:04: [io 0x0458-0x047f] has been reserved [ 2.049573] system 00:04: [io 0x0500-0x057f] has been reserved [ 2.049680] system 00:04: [io 0x164e-0x164f] has been reserved [ 2.049777] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.049899] pnp 00:05: [io 0x0070-0x0077] [ 2.049915] pnp 00:05: [irq 8] [ 2.050246] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.050744] pnp 00:06: [io 0x0454-0x0457] [ 2.051135] system 00:06: [io 0x0454-0x0457] has been reserved [ 2.051234] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.051349] pnp 00:07: [io 0x00f0-0x00ff] [ 2.051361] pnp 00:07: [irq 13] [ 2.051690] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.051909] pnp 00:08: [io 0x0010-0x001f] [ 2.051915] pnp 00:08: [io 0x0022-0x003f] [ 2.051922] pnp 00:08: [io 0x0044-0x005f] [ 2.051929] pnp 00:08: [io 0x0068-0x006f] [ 2.051935] pnp 00:08: [io 0x0072-0x007f] [ 2.051941] pnp 00:08: [io 0x0080] [ 2.051947] pnp 00:08: [io 0x0084-0x0086] [ 2.051953] pnp 00:08: [io 0x0088] [ 2.051959] pnp 00:08: [io 0x008c-0x008e] [ 2.051966] pnp 00:08: [io 0x0090-0x009f] [ 2.051972] pnp 00:08: [io 0x00a2-0x00bf] [ 2.051978] pnp 00:08: [io 0x00e0-0x00ef] [ 2.051984] pnp 00:08: [io 0x04d0-0x04d1] [ 2.051990] pnp 00:08: [mem 0xfe800000-0xfe802fff] [ 2.052374] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 2.052484] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved [ 2.052582] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.052800] pnp 00:09: [irq 12] [ 2.053141] pnp 00:09: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active) [ 2.053353] pnp 00:0a: [io 0x0060] [ 2.053359] pnp 00:0a: [io 0x0064] [ 2.053365] pnp 00:0a: [io 0x0062] [ 2.053371] pnp 00:0a: [io 0x0066] [ 2.053382] pnp 00:0a: [irq 1] [ 2.053710] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.059033] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] [ 2.059040] pnp 00:0b: [mem 0xfed10000-0xfed17fff] [ 2.059046] pnp 00:0b: [mem 0xfed18000-0xfed18fff] [ 2.059053] pnp 00:0b: [mem 0xfed19000-0xfed19fff] [ 2.059059] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 2.059065] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] [ 2.059071] pnp 00:0b: [mem 0xfed90000-0xfed93fff] [ 2.059078] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] [ 2.059084] pnp 00:0b: [mem 0xff000000-0xffffffff] [ 2.059091] pnp 00:0b: [mem 0xfee00000-0xfeefffff] [ 2.059097] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff] [ 2.059504] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.059615] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.059724] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.059843] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.059955] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 2.060064] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.060175] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.060285] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.060396] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 2.060516] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.060627] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 2.060726] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.061833] pnp 00:0c: [irq 20] [ 2.062200] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active) [ 2.064703] pnp 00:0d: [mem 0x20000000-0x201fffff] [ 2.064709] pnp 00:0d: [mem 0x40000000-0x401fffff] [ 2.065115] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved [ 2.065228] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved [ 2.065326] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.066058] pnp: PnP ACPI: found 14 devices [ 2.066150] ACPI: ACPI bus type pnp unregistered [ 2.066243] INFO_MDMA: LNW DMA Driver Version 1.1.0 [ 2.098289] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 2.098403] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 2.098498] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 2.098604] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref] [ 2.098709] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 2.098807] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff] [ 2.098914] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c] [ 2.099013] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] [ 2.099121] pci 0000:00:1c.7: PCI bridge to [bus 11-16] [ 2.099216] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff] [ 2.099314] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff] [ 2.099413] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref] [ 2.099657] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.099659] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.099660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.099662] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 2.099663] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 2.099664] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 2.099666] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 2.099668] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 2.099669] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 2.099671] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 2.099672] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff] [ 2.099674] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 2.099675] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref] [ 2.099677] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff] [ 2.099679] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 2.099680] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff] [ 2.099682] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff] [ 2.099683] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref] [ 2.099887] NET: Registered protocol family 2 [ 2.101840] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.103310] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 2.107136] TCP: Hash tables configured (established 524288 bind 65536) [ 2.107318] TCP: reno registered [ 2.107520] UDP hash table entries: 8192 (order: 8, 1310720 bytes) [ 2.108627] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes) [ 2.110037] NET: Registered protocol family 1 [ 2.110710] RPC: Registered named UNIX socket transport module. [ 2.110805] RPC: Registered udp transport module. [ 2.110897] RPC: Registered tcp transport module. [ 2.110987] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.111095] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xa6 [ 2.111097] pci 0000:00:02.0: Boot video device [ 2.111105] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x655 [ 2.111150] pci 0000:00:1a.0: EHCI: BIOS handoff [ 2.236337] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x655 [ 2.236421] pci 0000:00:1d.0: EHCI: BIOS handoff [ 2.356177] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x655 [ 2.356259] PCI: CLS 64 bytes, default 64 [ 2.356613] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.356709] software IO TLB [mem 0xd64e5000-0xda4e4fff] (64MB) mapped at [ffff8800d64e5000-ffff8800da4e4fff] [ 2.360363] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b [ 2.360483] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b [ 2.360961] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.367312] sha1_ssse3: Using AVX optimized SHA-1 implementation [ 2.369208] audit: initializing netlink socket (disabled) [ 2.369365] type=2000 audit(1358809217.150:1): initialized [ 2.372347] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.415477] DLM installed [ 2.427702] msgmni has been set to 31892 [ 2.432750] NET: Registered protocol family 38 [ 2.432878] async_tx: api initialized (async) [ 2.432978] Key type asymmetric registered [ 2.433078] Asymmetric key parser 'x509' registered [ 2.433749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.433855] io scheduler noop registered [ 2.433947] io scheduler deadline registered (default) [ 2.434756] io scheduler cfq registered [ 2.437553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.437648] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.442223] pci_bus 0000:11: dev 00, created physical slot 1 [ 2.442518] acpiphp: Slot [1] registered [ 2.443424] intel_idle: MWAIT substates: 0x21120 [ 2.443426] intel_idle: v0.4 model 0x2A [ 2.443427] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.444692] ACPI: AC Adapter [AC] (on-line) [ 2.446453] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.448328] ACPI: Lid Switch [LID0] [ 2.448977] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.449116] ACPI: Power Button [PWRB] [ 2.449756] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 2.449866] ACPI: Sleep Button [SBTN] [ 2.450489] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.450596] ACPI: Power Button [PWRF] [ 2.451969] ACPI: Requesting acpi_cpufreq [ 2.578930] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.579028] ACPI: Thermal Zone [THM] (65 C) [ 2.584528] GHES: HEST is not enabled! [ 2.584620] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 2.683362] ACPI: Battery Slot [BAT0] (battery present) [ 2.772228] Non-volatile memory driver v1.3 [ 2.772610] Linux agpgart interface v0.103 [ 2.772906] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 2.772907] Hangcheck: Using getrawmonotonic(). [ 2.783817] loop: module loaded [ 2.785709] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251) [ 2.785719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.785877] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251) [ 2.785884] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.786040] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251) [ 2.786046] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.786201] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251) [ 2.786208] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.786355] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.787936] ahci 0000:00:1f.2: version 3.0 [ 2.788139] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 2.788284] ahci: SSS flag set, parallel bus scan disabled [ 2.805427] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 2.805556] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 2.805707] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.855541] scsi0 : ahci [ 2.857605] scsi1 : ahci [ 2.858562] scsi2 : ahci [ 2.859530] scsi3 : ahci [ 2.860494] scsi4 : ahci [ 2.861457] scsi5 : ahci [ 2.862356] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 40 [ 2.862453] ata2: DUMMY [ 2.862541] ata3: DUMMY [ 2.862629] ata4: DUMMY [ 2.862718] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 40 [ 2.862814] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 40 [ 2.864356] tun: Universal TUN/TAP device driver, 1.6 [ 2.864449] tun: (C) 1999-2004 Max Krasnyansky [ 2.865027] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.865176] r8169 0000:05:00.0: enabling Mem-Wr-Inval [ 2.865447] r8169 0000:05:00.0: irq 41 for MSI/MSI-X [ 2.866825] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc9000184a000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 41 [ 2.866974] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.867405] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI [ 2.867967] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.868064] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 2.868185] ehci_hcd 0000:00:1a.0: enabling bus mastering [ 2.868191] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.868194] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 2.868396] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.868522] ehci_hcd 0000:00:1a.0: debug port 2 [ 2.868617] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 2.868621] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 2.868698] ehci_hcd 0000:00:1a.0: support lpm [ 2.868718] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.872596] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 2.872597] ehci_hcd 0000:00:1a.0: supports USB remote wakeup [ 2.872720] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000 [ 2.872816] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 2.885283] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.885780] usb usb1: default language 0x0409 [ 2.885899] usb usb1: udev 1, busnum 1, minor = 0 [ 2.885901] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.885996] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.886094] usb usb1: Product: EHCI Host Controller [ 2.886186] usb usb1: Manufacturer: Linux 3.7.4-default ehci_hcd [ 2.886279] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.887711] usb usb1: usb_probe_device [ 2.887713] usb usb1: configuration #1 chosen from 1 choice [ 2.887867] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.888306] hub 1-0:1.0: usb_probe_interface [ 2.888308] hub 1-0:1.0: usb_probe_interface - got id [ 2.888314] hub 1-0:1.0: USB hub found [ 2.888485] hub 1-0:1.0: 2 ports detected [ 2.888585] hub 1-0:1.0: standalone hub [ 2.888586] hub 1-0:1.0: no power switching (usb 1.0) [ 2.888587] hub 1-0:1.0: individual port over-current protection [ 2.888589] hub 1-0:1.0: power on to power good time: 20ms [ 2.888730] hub 1-0:1.0: local power source is good [ 2.890359] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 2.891003] ehci_hcd 0000:00:1d.0: enabling bus mastering [ 2.891009] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.891012] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.891140] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.891264] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.891358] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 2.891361] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 2.891416] ehci_hcd 0000:00:1d.0: support lpm [ 2.891422] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.895298] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 2.895300] ehci_hcd 0000:00:1d.0: supports USB remote wakeup [ 2.895424] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000 [ 2.895521] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 2.915308] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.915661] usb usb2: default language 0x0409 [ 2.915772] usb usb2: udev 1, busnum 2, minor = 128 [ 2.915773] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.915869] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.915967] usb usb2: Product: EHCI Host Controller [ 2.916059] usb usb2: Manufacturer: Linux 3.7.4-default ehci_hcd [ 2.916153] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.917359] usb usb2: usb_probe_device [ 2.917361] usb usb2: configuration #1 chosen from 1 choice [ 2.917416] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.917800] hub 2-0:1.0: usb_probe_interface [ 2.917802] hub 2-0:1.0: usb_probe_interface - got id [ 2.917805] hub 2-0:1.0: USB hub found [ 2.917961] hub 2-0:1.0: 2 ports detected [ 2.918060] hub 2-0:1.0: standalone hub [ 2.918062] hub 2-0:1.0: no power switching (usb 1.0) [ 2.918063] hub 2-0:1.0: individual port over-current protection [ 2.918065] hub 2-0:1.0: power on to power good time: 20ms [ 2.918126] hub 2-0:1.0: local power source is good [ 2.919641] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.920357] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.920453] ohci_hcd: block sizes: ed 80 td 96 [ 2.920790] xhci_hcd 0000:0b:00.0: enabling bus mastering [ 2.920795] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 2.920921] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3 [ 2.921349] xhci_hcd 0000:0b:00.0: enabling Mem-Wr-Inval [ 2.921352] xhci_hcd 0000:0b:00.0: supports USB remote wakeup [ 2.921380] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7d00000 [ 2.921689] xhci_hcd 0000:0b:00.0: irq 42 for MSI/MSI-X [ 2.921718] xhci_hcd 0000:0b:00.0: irq 43 for MSI/MSI-X [ 2.921747] xhci_hcd 0000:0b:00.0: irq 44 for MSI/MSI-X [ 2.922403] usb usb3: default language 0x0409 [ 2.922509] usb usb3: udev 1, busnum 3, minor = 256 [ 2.922511] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.922608] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.924025] usb usb3: Product: xHCI Host Controller [ 2.924118] usb usb3: Manufacturer: Linux 3.7.4-default xhci_hcd [ 2.924212] usb usb3: SerialNumber: 0000:0b:00.0 [ 2.925212] usb usb3: usb_probe_device [ 2.925214] usb usb3: configuration #1 chosen from 1 choice [ 2.925231] xHCI xhci_add_endpoint called for root hub [ 2.925232] xHCI xhci_check_bandwidth called for root hub [ 2.925268] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.925665] hub 3-0:1.0: usb_probe_interface [ 2.925667] hub 3-0:1.0: usb_probe_interface - got id [ 2.925670] hub 3-0:1.0: USB hub found [ 2.925826] hub 3-0:1.0: 2 ports detected [ 2.925926] hub 3-0:1.0: standalone hub [ 2.925927] hub 3-0:1.0: individual port power switching [ 2.925928] hub 3-0:1.0: individual port over-current protection [ 2.925930] hub 3-0:1.0: Single TT [ 2.925931] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.925933] hub 3-0:1.0: power on to power good time: 20ms [ 2.925997] hub 3-0:1.0: local power source is good [ 2.926344] hub 3-0:1.0: enabling power on all ports [ 2.926875] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 2.926993] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4 [ 2.927111] xhci_hcd 0000:0b:00.0: supports USB remote wakeup [ 2.927342] usb usb4: skipped 1 descriptor after endpoint [ 2.927378] usb usb4: default language 0x0409 [ 2.927496] usb usb4: udev 1, busnum 4, minor = 384 [ 2.927498] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.927594] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.927690] usb usb4: Product: xHCI Host Controller [ 2.927783] usb usb4: Manufacturer: Linux 3.7.4-default xhci_hcd [ 2.927877] usb usb4: SerialNumber: 0000:0b:00.0 [ 2.928717] usb usb4: usb_probe_device [ 2.928719] usb usb4: configuration #1 chosen from 1 choice [ 2.928737] xHCI xhci_add_endpoint called for root hub [ 2.928738] xHCI xhci_check_bandwidth called for root hub [ 2.928810] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.929200] hub 4-0:1.0: usb_probe_interface [ 2.929202] hub 4-0:1.0: usb_probe_interface - got id [ 2.929205] hub 4-0:1.0: USB hub found [ 2.929365] hub 4-0:1.0: 2 ports detected [ 2.929465] hub 4-0:1.0: standalone hub [ 2.929467] hub 4-0:1.0: individual port power switching [ 2.929468] hub 4-0:1.0: individual port over-current protection [ 2.929470] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.929471] hub 4-0:1.0: power on to power good time: 20ms [ 2.929538] hub 4-0:1.0: local power source is good [ 2.929878] hub 4-0:1.0: enabling power on all ports [ 2.975694] Initializing USB Mass Storage driver... [ 2.976043] usbcore: registered new interface driver usb-storage [ 2.976137] USB Mass Storage support registered. [ 2.976407] usbcore: registered new interface driver ums-datafab [ 2.976677] usbcore: registered new interface driver ums-freecom [ 2.977003] usbcore: registered new interface driver ums-realtek [ 2.977275] usbcore: registered new interface driver ums-usbat [ 2.977811] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12 [ 2.980609] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.980761] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.982360] mousedev: PS/2 mouse device common for all mice [ 2.985158] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.985169] hub 1-0:1.0: port 1: status 0501 change 0001 [ 2.985383] usbcore: registered new interface driver synaptics_usb [ 2.985886] rtc_cmos 00:05: RTC can wake from S4 [ 2.986730] rtc_cmos: dev (254:0) [ 2.986758] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.986913] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.987181] i2c /dev entries driver [ 2.987824] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251) [ 2.987832] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.988233] Driver for 1-wire Dallas network protocol. [ 2.989977] coretemp coretemp.0: TjMax is 100 degrees C [ 2.990013] coretemp coretemp.0: TjMax is 100 degrees C [ 2.990054] coretemp coretemp.0: TjMax is 100 degrees C [ 2.990087] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 2.990289] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 2.991382] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.991638] iTCO_vendor_support: vendor-support=0 [ 2.991747] md: linear personality registered for level -1 [ 2.991843] md: raid0 personality registered for level 0 [ 2.991936] md: raid1 personality registered for level 1 [ 2.992029] md: raid10 personality registered for level 10 [ 2.992121] md: raid6 personality registered for level 6 [ 2.992213] md: raid5 personality registered for level 5 [ 2.992306] md: raid4 personality registered for level 4 [ 2.993834] device-mapper: uevent: version 1.0.3 [ 2.995045] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 2.997991] device-mapper: dm-log-userspace: version 1.1.0 loaded [ 2.999076] usbcore: registered new interface driver btusb [ 2.999901] cpuidle: using governor ladder [ 3.001121] cpuidle: using governor menu [ 3.001497] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.001805] sdhci: Secure Digital Host Controller Interface driver [ 3.001901] sdhci: Copyright(c) Pierre Ossman [ 3.006757] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 3.011177] usbcore: registered new interface driver usbhid [ 3.011271] usbhid: USB HID core driver [ 3.013001] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 3.015491] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 3.015748] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 3.015760] hub 2-0:1.0: port 1: status 0501 change 0001 [ 3.025155] hub 3-0:1.0: port 1: status 0101 change 0001 [ 3.025329] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.027907] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 3.027993] hub 4-0:1.0: reset change on port 1 [ 3.028021] hub 4-0:1.0: warm reset change on port 1 [ 3.028049] hub 4-0:1.0: port 1, status 0203, change 0031, 5.0 Gb/s [ 3.101733] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 3.118277] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 3.119478] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 3.120657] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 3.126602] TCP: cubic registered [ 3.126695] NET: Registered protocol family 17 [ 3.126951] Bluetooth: RFCOMM TTY layer initialized [ 3.127071] Bluetooth: RFCOMM socket layer initialized [ 3.127164] Bluetooth: RFCOMM ver 1.11 [ 3.127254] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.127347] Bluetooth: BNEP filters: protocol multicast [ 3.127451] Bluetooth: BNEP socket layer initialized [ 3.127544] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.127650] Bluetooth: HIDP socket layer initialized [ 3.135805] sctp: Hash tables configured (established 65536 bind 65536) [ 3.136976] Key type dns_resolver registered [ 3.139836] PM: Checking hibernation image partition /dev/sda6 [ 3.204890] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.204950] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x203 [ 3.219820] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.220324] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133 [ 3.220449] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.220761] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 3.235897] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.236612] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 3.236625] ata1.00: configured for UDMA/133 [ 3.255640] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5 [ 3.260174] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 3.260274] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.260817] sd 0:0:0:0: [sda] Write Protect is off [ 3.260911] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.261092] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.261305] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.325864] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 3.354747] tsc: Refined TSC clocksource calibration: 2793.653 MHz [ 3.354864] Switching to clocksource tsc [ 3.357352] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.362676] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.496156] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 3.605117] usb 4-1: skipped 1 descriptor after endpoint [ 3.614258] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.620191] usb 4-1: default language 0x0409 [ 3.624059] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100 [ 3.634495] ata5.00: configured for UDMA/100 [ 3.650670] usb 4-1: udev 2, busnum 4, minor = 385 [ 3.650673] usb 4-1: New USB device found, idVendor=2109, idProduct=0810 [ 3.650776] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.650873] usb 4-1: Product: 4-Port USB 3.0 Hub [ 3.651009] usb 4-1: Manufacturer: VIA Labs, Inc. [ 3.651791] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5 [ 3.652391] usb 4-1: usb_probe_device [ 3.652395] usb 4-1: configuration #1 chosen from 1 choice [ 3.662255] usb 4-1: Successful Endpoint Configure command [ 3.666541] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 3.667132] hub 4-1:1.0: usb_probe_interface [ 3.667136] hub 4-1:1.0: usb_probe_interface - got id [ 3.667146] hub 4-1:1.0: USB hub found [ 3.672935] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.672944] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.675054] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.676257] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 3.266053] ACPI: Invalid Power Resource to register! [ 3.680482] ACPI: Invalid Power Resource to register! [ 3.720936] hub 4-1:1.0: 4 ports detected [ 3.721047] hub 4-1:1.0: standalone hub [ 3.721049] hub 4-1:1.0: individual port power switching [ 3.721050] hub 4-1:1.0: individual port over-current protection [ 3.721052] hub 4-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 3.721053] hub 4-1:1.0: power on to power good time: 0ms [ 3.726766] usb 4-1: Successful Endpoint Configure command [ 3.732552] hub 4-1:1.0: local power source is good [ 3.738178] hub 4-1:1.0: enabling power on all ports [ 3.761660] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 3.761692] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 3.814188] ehci_hcd 0000:00:1a.0: port 1 reset complete, port enabled [ 3.814193] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 3.873926] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 3.934134] ehci_hcd 0000:00:1a.0: port 1 reset complete, port enabled [ 3.934139] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 3.977352] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input10 [ 3.992916] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11 [ 4.023664] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.024009] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1 [ 4.024029] ehci_hcd 0000:00:1a.0: LPM: no device attached [ 4.026393] usb 1-1: udev 2, busnum 1, minor = 1 [ 4.026396] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.026497] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.026672] ata6.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133 [ 4.026766] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.027286] ata6.00: failed to get Identify Device Data, Emask 0x1 [ 4.027560] usb 1-1: usb_probe_device [ 4.027564] usb 1-1: configuration #1 chosen from 1 choice [ 4.029746] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 4.030211] hub 1-1:1.0: usb_probe_interface [ 4.030213] hub 1-1:1.0: usb_probe_interface - got id [ 4.030217] hub 1-1:1.0: USB hub found [ 4.030382] ata6.00: failed to get Identify Device Data, Emask 0x1 [ 4.030385] ata6.00: configured for UDMA/133 [ 4.030507] hub 1-1:1.0: 6 ports detected [ 4.030606] hub 1-1:1.0: standalone hub [ 4.030607] hub 1-1:1.0: individual port power switching [ 4.030609] hub 1-1:1.0: individual port over-current protection [ 4.030610] hub 1-1:1.0: Single TT [ 4.030612] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 4.030613] hub 1-1:1.0: power on to power good time: 100ms [ 4.030915] hub 1-1:1.0: local power source is good [ 4.030951] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5 [ 4.034962] sd 5:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 4.035059] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 4.035614] sd 5:0:0:0: [sdb] Write Protect is off [ 4.035707] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.035909] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.038633] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 4.048667] hub 1-1:1.0: enabling power on all ports [ 4.050597] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 4.050633] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 4.083577] sdb: sdb1 [ 4.085833] sd 5:0:0:0: [sdb] Attached SCSI disk [ 4.085948] PM: Hibernation image partition 8:6 present [ 4.085949] PM: Looking for hibernation image. [ 4.103878] ehci_hcd 0000:00:1d.0: port 1 reset complete, port enabled [ 4.103884] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 4.121551] PM: Image not found (code -22) [ 4.121554] PM: Hibernation image not present or could not be loaded. [ 4.121731] kmemleak: Kernel memory leak detector initialized [ 4.121759] kmemleak: Automatic memory scanning thread started [ 4.123996] rtc_cmos 00:05: setting system clock to 2013-01-21 23:00:19 UTC (1358809219) [ 4.135788] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found [ 4.140620] ALSA device list: [ 4.140709] #0: HDA Intel PCH at 0xf7f00000 irq 45 [ 4.141155] md: Waiting for all devices to be available before autodetect [ 4.141248] md: If you don't use raid, use raid=noautodetect [ 4.143732] md: Autodetecting RAID arrays. [ 4.143820] md: Scanned 0 and added 0 devices. [ 4.143909] md: autorun ... [ 4.144009] md: ... autorun DONE. [ 4.144106] hub 1-1:1.0: port 5: status 0101 change 0001 [ 4.163575] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 4.214871] kjournald starting. Commit interval 5 seconds [ 4.215163] EXT3-fs (sda5): mounted filesystem with writeback data mode [ 4.215292] VFS: Mounted root (ext3 filesystem) readonly on device 8:5. [ 4.223707] ehci_hcd 0000:00:1d.0: port 1 reset complete, port enabled [ 4.223723] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 4.243402] usb 1-1: link qh256-0001/ffff88040a84ee40 start 1 [1/0 us] [ 4.255928] devtmpfs: mounted [ 4.257571] Freeing unused kernel memory: 688k freed [ 4.313548] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1 [ 4.313559] ehci_hcd 0000:00:1d.0: LPM: no device attached [ 4.314206] usb 2-1: udev 2, busnum 2, minor = 129 [ 4.314216] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.314363] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.316934] usb 2-1: usb_probe_device [ 4.316942] usb 2-1: configuration #1 chosen from 1 choice [ 4.318434] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 4.319809] hub 2-1:1.0: usb_probe_interface [ 4.319817] hub 2-1:1.0: usb_probe_interface - got id [ 4.319831] hub 2-1:1.0: USB hub found [ 4.320454] hub 2-1:1.0: 8 ports detected [ 4.320624] hub 2-1:1.0: standalone hub [ 4.320629] hub 2-1:1.0: individual port power switching [ 4.320634] hub 2-1:1.0: individual port over-current protection [ 4.320638] hub 2-1:1.0: Single TT [ 4.320644] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 4.320649] hub 2-1:1.0: power on to power good time: 100ms [ 4.321182] hub 2-1:1.0: local power source is good [ 4.420250] hub 2-1:1.0: enabling power on all ports [ 4.422644] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 4.422668] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 4.513519] hub 2-1:1.0: port 2: status 0101 change 0001 [ 4.532941] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 4.555660] usb 3-1: default language 0x0409 [ 4.556325] usb 3-1: udev 2, busnum 3, minor = 257 [ 4.556335] usb 3-1: New USB device found, idVendor=2109, idProduct=3431 [ 4.556479] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.556621] usb 3-1: Product: USB2.0 Hub [ 4.559120] usb 3-1: usb_probe_device [ 4.559131] usb 3-1: configuration #1 chosen from 1 choice [ 4.588885] usb 3-1: Successful Endpoint Configure command [ 4.589677] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 4.591144] hub 3-1:1.0: usb_probe_interface [ 4.591154] hub 3-1:1.0: usb_probe_interface - got id [ 4.591168] hub 3-1:1.0: USB hub found [ 4.591974] hub 3-1:1.0: 4 ports detected [ 4.592149] hub 3-1:1.0: standalone hub [ 4.592155] hub 3-1:1.0: individual port power switching [ 4.592159] hub 3-1:1.0: individual port over-current protection [ 4.592164] hub 3-1:1.0: Single TT [ 4.592170] hub 3-1:1.0: TT requires at most 32 FS bit times (2664 ns) [ 4.592174] hub 3-1:1.0: Port indicators are supported [ 4.592179] hub 3-1:1.0: power on to power good time: 100ms [ 4.592886] usb 3-1: Successful Endpoint Configure command [ 4.593473] hub 3-1:1.0: local power source is good [ 4.595686] hub 3-1:1.0: enabling power on all ports [ 4.604635] hub 4-1:1.0: state 7 ports 4 chg 0000 evt 0000 [ 4.604658] hub 1-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 4.604774] usb 4-1: remote wakeup needed for autosuspend [ 4.605018] hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 4.612819] usb 2-1: link qh256-0001/ffff88040a84e098 start 1 [1/0 us] [ 4.683015] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd [ 4.704083] hub 3-1:1.0: port 3: status 0301 change 0001 [ 4.704864] hub 3-1:1.0: port 4: status 0301 change 0001 [ 4.799491] usb 1-1.5: skipped 1 descriptor after configuration [ 4.799502] usb 1-1.5: skipped 6 descriptors after interface [ 4.799531] usb 1-1.5: skipped 1 descriptor after endpoint [ 4.799538] usb 1-1.5: skipped 19 descriptors after interface [ 4.799855] usb 1-1.5: skipped 1 descriptor after endpoint [ 4.800219] usb 1-1.5: default language 0x0409 [ 4.801775] usb 1-1.5: udev 3, busnum 1, minor = 2 [ 4.801786] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820 [ 4.801934] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.802075] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD [ 4.802210] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00 [ 4.804813] usb 1-1.5: usb_probe_device [ 4.804824] usb 1-1.5: configuration #1 chosen from 1 choice [ 4.805159] usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0) [ 4.807772] usb 1-1.5: adding 1-1.5:1.1 (config #1, interface 1) [ 4.810102] hub 2-1:1.0: state 7 ports 8 chg 0004 evt 0000 [ 4.810256] hub 2-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 4.882728] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd [ 4.993755] usb 2-1.2: skipped 1 descriptor after interface [ 4.994164] usb 2-1.2: default language 0x0409 [ 4.995344] usb 2-1.2: udev 3, busnum 2, minor = 130 [ 4.995354] usb 2-1.2: New USB device found, idVendor=13fd, idProduct=0550 [ 4.995502] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.995643] usb 2-1.2: Product: WD3200BEVE-00A0H [ 4.995776] usb 2-1.2: Manufacturer: Initio [ 4.995908] usb 2-1.2: SerialNumber: 00101005500011B80 [ 4.998560] usb 2-1.2: usb_probe_device [ 4.998570] usb 2-1.2: configuration #1 chosen from 1 choice [ 4.999046] usb 2-1.2: adding 2-1.2:1.0 (config #1, interface 0) [ 5.000403] usb-storage 2-1.2:1.0: usb_probe_interface [ 5.000418] usb-storage 2-1.2:1.0: usb_probe_interface - got id [ 5.001464] scsi6 : usb-storage 2-1.2:1.0 [ 5.005784] usb 2-1.2: adding 2-1.2:1.1 (config #1, interface 1) [ 5.007129] usbhid 2-1.2:1.1: usb_probe_interface [ 5.007135] usbhid 2-1.2:1.1: usb_probe_interface - got id [ 5.012444] usbhid 2-1.2:1.1: looking for a minor, starting at 0 [ 5.013855] hid-generic 0003:13FD:0550.0001: hiddev0,hidraw0: USB HID v1.10 Device [Initio WD3200BEVE-00A0H] on usb-0000:00:1d.0-1.2/input1 [ 5.014379] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 5.014582] hub 3-1:1.0: state 7 ports 4 chg 0018 evt 0000 [ 5.015163] hub 3-1:1.0: port 3, status 0301, change 0000, 1.5 Mb/s [ 5.092676] usb 3-1.3: new low-speed USB device number 3 using xhci_hcd [ 5.118793] usb 3-1.3: skipped 1 descriptor after interface [ 5.119770] usb 3-1.3: default language 0x0409 [ 5.123710] usb 3-1.3: udev 3, busnum 3, minor = 258 [ 5.123716] usb 3-1.3: New USB device found, idVendor=046d, idProduct=c050 [ 5.123857] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.123964] usb 3-1.3: Product: USB-PS/2 Optical Mouse [ 5.124066] usb 3-1.3: Manufacturer: Logitech [ 5.125567] usb 3-1.3: usb_probe_device [ 5.125572] usb 3-1.3: configuration #1 chosen from 1 choice [ 5.125660] usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5.131738] usb 3-1.3: Successful Endpoint Configure command [ 5.132695] usb 3-1.3: adding 3-1.3:1.0 (config #1, interface 0) [ 5.133327] usbhid 3-1.3:1.0: usb_probe_interface [ 5.133328] usbhid 3-1.3:1.0: usb_probe_interface - got id [ 5.139617] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input12 [ 5.141599] hid-generic 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-1.3/input0 [ 5.142687] hub 3-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s [ 5.222606] usb 3-1.4: new low-speed USB device number 4 using xhci_hcd [ 5.250876] usb 3-1.4: skipped 1 descriptor after interface [ 5.252298] usb 3-1.4: default language 0x0409 [ 5.257324] usb 3-1.4: udev 4, busnum 3, minor = 259 [ 5.257334] usb 3-1.4: New USB device found, idVendor=04f2, idProduct=0116 [ 5.257483] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.257625] usb 3-1.4: Product: USB Keyboard [ 5.257756] usb 3-1.4: Manufacturer: CHICONY [ 5.260283] usb 3-1.4: usb_probe_device [ 5.260294] usb 3-1.4: configuration #1 chosen from 1 choice [ 5.260440] usb 3-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5.291791] usb 3-1.4: Successful Endpoint Configure command [ 5.292781] usb 3-1.4: adding 3-1.4:1.0 (config #1, interface 0) [ 5.293387] usbhid 3-1.4:1.0: usb_probe_interface [ 5.293390] usbhid 3-1.4:1.0: usb_probe_interface - got id [ 5.301384] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input13 [ 5.303510] hid-generic 0003:04F2:0116.0003: input,hidraw2: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:0b:00.0-1.4/input0 [ 5.304086] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0004 [ 6.004324] scsi 6:0:0:0: Direct-Access Initio WD3200BEVE-00A0H 3.12 PQ: 0 ANSI: 0 [ 6.011733] sd 6:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 6.013221] sd 6:0:0:0: [sdc] Write Protect is off [ 6.013330] sd 6:0:0:0: [sdc] Mode Sense: 86 0b 00 02 [ 6.013424] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 6.014691] sd 6:0:0:0: [sdc] No Caching mode page present [ 6.014781] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 6.019939] sd 6:0:0:0: [sdc] No Caching mode page present [ 6.020029] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 6.020973] sdc: sdc1 [ 6.025102] sd 6:0:0:0: [sdc] No Caching mode page present [ 6.025224] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 6.025315] sd 6:0:0:0: [sdc] Attached SCSI disk [ 9.293913] systemd-udevd[1958]: starting version 196 [ 11.422027] sata_sil24 0000:11:00.0: version 1.1 [ 11.427381] scsi7 : sata_sil24 [ 11.427938] scsi8 : sata_sil24 [ 11.428377] ata7: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c80000 irq 19 [ 11.428380] ata8: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c82000 irq 19 [ 12.556780] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 12.556783] Copyright(c) 2003-2012 Intel Corporation [ 12.557120] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000 [ 12.557123] iwlwifi 0000:09:00.0: pci_resource_base = ffffc90001874000 [ 12.557126] iwlwifi 0000:09:00.0: HW Revision ID = 0x34 [ 12.557641] iwlwifi 0000:09:00.0: irq 46 for MSI/MSI-X [ 12.679623] iwlwifi 0000:09:00.0: loaded firmware version 18.168.6.1 [ 13.509593] ata7: SATA link down (SStatus 0 SControl 0) [ 13.990768] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 13.990772] iwldvm: Copyright(c) 2003-2012 Intel Corporation [ 13.991114] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 13.991118] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 13.991121] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 13.991124] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 13.991127] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled [ 13.991132] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0 [ 13.991816] iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S [ 13.998827] iwlwifi 0000:09:00.0: RF_KILL bit toggled to disable radio. [ 14.009349] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6 [ 14.009353] iwlwifi 0000:09:00.0: Device SKU: 0x150 [ 14.009356] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3 [ 14.010201] Registered led device: phy0-led [ 14.011142] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 15.596437] ata8: SATA link down (SStatus 0 SControl 0) [ 16.575830] [drm] Initialized drm 1.1.0 20060810 [ 17.168722] pci 0000:00:00.0: Intel Sandybridge Chipset [ 17.168883] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 17.169570] pci 0000:00:00.0: detected 65536K stolen memory [ 17.169706] i915 0000:00:02.0: setting latency timer to 64 [ 17.207948] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 17.208051] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 17.208052] [drm] Driver supports precise vblank timestamp query. [ 17.208382] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.628193] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 18.214174] fbcon: inteldrmfb (fb0) is primary device [ 19.323390] Console: switching to colour frame buffer device 170x48 [ 19.335223] fb0: inteldrmfb frame buffer device [ 19.335226] drm: registered panic notifier [ 19.414875] acpi device:34: registered as cooling_device2 [ 19.418734] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 19.419210] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 [ 19.419936] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 21.727582] EXT3-fs (sda5): using internal journal [ 22.246831] Adding 4998972k swap on /dev/sda6. Priority:-1 extents:1 across:4998972k [ 26.735521] r8169 0000:05:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2) [ 26.763781] r8169 0000:05:00.0 eth0: link down [ 26.765158] r8169 0000:05:00.0 eth0: link down [ 28.438571] r8169 0000:05:00.0 eth0: link up [ 44.457132] microcode: CPU0 updated to revision 0x28, date = 2012-04-24 [ 44.457823] microcode: CPU1 updated to revision 0x28, date = 2012-04-24 [ 44.457827] perf_event_intel: PEBS enabled due to microcode update [ 47.348410] r8169 0000:05:00.0 eth0: link down [ 61.327619] r8169 0000:05:00.0 eth0: link up [ 70.858379] kjournald starting. Commit interval 5 seconds [ 70.859175] EXT3-fs (sdc1): using internal journal [ 70.859178] EXT3-fs (sdc1): mounted filesystem with writeback data mode [ 75.895183] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 258.616949] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 258.622417] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 258.622431] ata1.00: configured for UDMA/133 [ 258.622460] ata1: EH complete [ 258.730297] ata6.00: failed to get Identify Device Data, Emask 0x1 [ 258.732901] ata6.00: failed to get Identify Device Data, Emask 0x1 [ 258.732914] ata6.00: configured for UDMA/133 [ 258.732941] ata6: EH complete [ 259.257830] EXT4-fs (sdb1): re-mounted. Opts: commit=0 [ 689.760580] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 1309.528860] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 7592.489133] hda-intel: Unstable LPIB (65528 >= 8192); disabling LPIB delay counting [10985.856711] r8169 0000:05:00.0 eth0: link down [41988.520692] r8169 0000:05:00.0 eth0: link up [42006.969722] r8169 0000:05:00.0 eth0: link down [42038.394621] r8169 0000:05:00.0 eth0: link up [42041.799810] r8169 0000:05:00.0 eth0: link down [42049.589376] r8169 0000:05:00.0 eth0: link up [42134.563582] r8169 0000:05:00.0 eth0: link down [42134.563589] r8169 0000:05:00.0 eth0: link down [42136.750164] r8169 0000:05:00.0 eth0: link up