| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1359025589-22277-34-git-send-email-vgupta@synopsys.com>
Date: Thu, 24 Jan 2013 16:36:17 +0530
From: Vineet Gupta <Vineet.Gupta1@...opsys.com>
To: <linux-arch@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <arnd@...db.de>, Vineet Gupta <Vineet.Gupta1@...opsys.com>
Subject: [PATCH v3 53/71] ARC: [plat-arfpga] BVCI Latency Unit setup
Signed-off-by: Vineet Gupta <vgupta@...opsys.com>
---
arch/arc/plat-arcfpga/Kconfig | 32 +++++++++++++++++++++
arch/arc/plat-arcfpga/platform.c | 56 ++++++++++++++++++++++++++++++++++++++
2 files changed, 88 insertions(+), 0 deletions(-)
diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig
index 38752bf..9912d9c 100644
--- a/arch/arc/plat-arcfpga/Kconfig
+++ b/arch/arc/plat-arcfpga/Kconfig
@@ -44,4 +44,36 @@ config ARC_SERIAL_BAUD
help
Baud rate for the ARC UART
+menuconfig ARC_HAS_BVCI_LAT_UNIT
+ bool "BVCI Bus Latency Unit"
+ depends on ARC_BOARD_ML509 || ARC_BOARD_ANGEL4
+ help
+ IP to add artifical latency to BVCI Bus Based FPGA builds.
+ The default latency (even worst case) for FPGA is non-realistic
+ (~10 SDRAM, ~5 SSRAM).
+
+config BVCI_LAT_UNITS
+ hex "Latency Unit(s) Bitmap"
+ default "0x0"
+ depends on ARC_HAS_BVCI_LAT_UNIT
+ help
+ There are multiple Latency Units corresponding to the many
+ interfaces of the system bus arbiter (both CPU side as well as
+ the peripheral side).
+ To add latency to ALL memory transaction, choose Unit 0, otherwise
+ for finer grainer - interface wise latency, specify a bitmap (1 bit
+ per unit) of all units. e.g. 1,2,12 will be 0x1003
+
+ Unit 0 - System Arb and Mem Controller
+ Unit 1 - I$ and System Bus
+ Unit 2 - D$ and System Bus
+ ..
+ Unit 12 - IDE Disk controller and System Bus
+
+config BVCI_LAT_CYCLES
+ int "Latency Value in cycles"
+ range 0 63
+ default "30"
+ depends on ARC_HAS_BVCI_LAT_UNIT
+
endif
diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c
index 33bcac8..b7f63e3 100644
--- a/arch/arc/plat-arcfpga/platform.c
+++ b/arch/arc/plat-arcfpga/platform.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <linux/console.h>
#include <linux/of_platform.h>
#include <asm/setup.h>
@@ -19,6 +20,59 @@
#include <asm/clk.h>
#include <plat/memmap.h>
+/*-----------------------BVCI Latency Unit -----------------------------*/
+
+#ifdef CONFIG_ARC_HAS_BVCI_LAT_UNIT
+
+int lat_cycles = CONFIG_BVCI_LAT_CYCLES;
+
+/* BVCI Bus Profiler: Latency Unit */
+static void __init setup_bvci_lat_unit(void)
+{
+#define MAX_BVCI_UNITS 12
+
+ unsigned int i;
+ unsigned int *base = (unsigned int *)BVCI_LAT_UNIT_BASE;
+ const unsigned long units_req = CONFIG_BVCI_LAT_UNITS;
+ const unsigned int REG_UNIT = 21;
+ const unsigned int REG_VAL = 22;
+
+ /*
+ * There are multiple Latency Units corresponding to the many
+ * interfaces of the system bus arbiter (both CPU side as well as
+ * the peripheral side).
+ *
+ * Unit 0 - System Arb and Mem Controller - adds latency to all
+ * memory trasactions
+ * Unit 1 - I$ and System Bus
+ * Unit 2 - D$ and System Bus
+ * ..
+ * Unit 12 - IDE Disk controller and System Bus
+ *
+ * The programmers model requires writing to lat_unit reg first
+ * and then the latency value (cycles) to lat_value reg
+ */
+
+ if (CONFIG_BVCI_LAT_UNITS == 0) {
+ writel(0, base + REG_UNIT);
+ writel(lat_cycles, base + REG_VAL);
+ pr_info("BVCI Latency for all Memory Transactions %d cycles\n",
+ lat_cycles);
+ } else {
+ for_each_set_bit(i, &units_req, MAX_BVCI_UNITS) {
+ writel(i + 1, base + REG_UNIT); /* loop is 0 based */
+ writel(lat_cycles, base + REG_VAL);
+ pr_info("BVCI Latency for Unit[%d] = %d cycles\n",
+ (i + 1), lat_cycles);
+ }
+ }
+}
+#else
+static void __init setup_bvci_lat_unit(void)
+{
+}
+#endif
+
/*----------------------- Platform Devices -----------------------------*/
static unsigned long arc_uart_info[] = {
@@ -106,6 +160,8 @@ void __init arc_platform_early_init(void)
{
pr_info("[plat-arcfpga]: registering early dev resources\n");
+ setup_bvci_lat_unit();
+
arc_fpga_serial_init();
}
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists