[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1359104435-26995-1-git-send-email-maxime.ripard@free-electrons.com>
Date: Fri, 25 Jan 2013 10:00:35 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Shawn Guo <shawn.guo@...aro.org>
Cc: Brian Lilly <brian@...stalfontz.com>,
linux-arm-kernel@...ts.infradead.org,
Russell King <linux@....linux.org.uk>,
linux-kernel@...r.kernel.org
Subject: [PATCHv2] ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support
The CFA-10037 is another expansion board for the CFA-10036 module, with
only a USB Host, a Ethernet device and a lot of gpios.
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx28-cfa10037.dts | 77 ++++++++++++++++++++++++++++++++++
arch/arm/mach-mxs/mach-mxs.c | 8 ++++
3 files changed, 86 insertions(+)
create mode 100644 arch/arm/boot/dts/imx28-cfa10037.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e44da40..f9912f6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-apf28dev.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
+ imx28-cfa10037.dtb \
imx28-cfa10049.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
new file mode 100644
index 0000000..c2ef3a3
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+ model = "Crystalfontz CFA-10037 Board";
+ compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@...00000 {
+ apbh@...00000 {
+ pinctrl@...18000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&hog_pins_cfa10037>;
+
+ hog_pins_cfa10037: hog-10037@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+ };
+
+ apbx@...40000 {
+ usbphy1: usbphy@...7e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@...80000 {
+ usb1: usb@...90000 {
+ vbus-supply = <®_usb1_vbus>;
+ pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ mac0: ethernet@...f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
+ };
+ };
+};
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 4668cf7..622c45a 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -417,6 +417,12 @@ static void __init cfa10049_init(void)
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
+static void __init cfa10037_init(void)
+{
+ enable_clk_enet_out();
+ update_fec_mac_prop(OUI_CRYSTALFONTZ);
+}
+
static void __init apf28_init(void)
{
enable_clk_enet_out();
@@ -437,6 +443,8 @@ static void __init mxs_machine_init(void)
m28evk_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
+ else if (of_machine_is_compatible("crystalfontz,cfa10037"))
+ cfa10037_init();
else if (of_machine_is_compatible("crystalfontz,cfa10049"))
cfa10049_init();
else if (of_machine_is_compatible("armadeus,imx28-apf28"))
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists