[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1359110167-5703-3-git-send-email-prabhakar.lad@ti.com>
Date: Fri, 25 Jan 2013 16:06:07 +0530
From: Prabhakar Lad <prabhakar.csengg@...il.com>
To: LMML <linux-media@...r.kernel.org>
Cc: LKML <linux-kernel@...r.kernel.org>,
Mauro Carvalho Chehab <mchehab@...hat.com>,
Hans Verkuil <hans.verkuil@...co.com>,
Manjunath Hadli <manjunath.hadli@...com>,
"Lad, Prabhakar" <prabhakar.lad@...com>
Subject: [PATCH 2/2] media: add support for THS7353 video amplifier
From: Manjunath Hadli <manjunath.hadli@...com>
The patch adds support for THS7353 video amplifier. Enable
dv_preset support for THS7353 so that setting a HD mode on the
host device makes sure appropriate mode in the amplifier is enabled.
Signed-off-by: Manjunath Hadli <manjunath.hadli@...com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@...com>
---
drivers/media/i2c/Kconfig | 10 ++
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ths7353.c | 223 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 234 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/i2c/ths7353.c
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 24d78e2..d1ebb0b 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -570,6 +570,16 @@ config VIDEO_THS7303
To compile this driver as a module, choose M here: the
module will be called ths7303.
+config VIDEO_THS7353
+ tristate "THS7353 Video Amplifier"
+ depends on I2C
+ help
+ Support for TI THS7353 video amplifier
+
+ To compile this driver as a module, choose M here: the
+ module will be called ths7353. This helps tvp7002 to amplify
+ the signals.
+
config VIDEO_M52790
tristate "Mitsubishi M52790 A/V switch"
depends on VIDEO_V4L2 && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index b1d62df..9944d06 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_VIDEO_BT856) += bt856.o
obj-$(CONFIG_VIDEO_BT866) += bt866.o
obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
obj-$(CONFIG_VIDEO_THS7303) += ths7303.o
+obj-$(CONFIG_VIDEO_THS7353) += ths7353.o
obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
diff --git a/drivers/media/i2c/ths7353.c b/drivers/media/i2c/ths7353.c
new file mode 100644
index 0000000..288cd1f
--- /dev/null
+++ b/drivers/media/i2c/ths7353.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-device.h>
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+#define THS7353_CHANNEL_1 1
+#define THS7353_CHANNEL_2 2
+#define THS7353_CHANNEL_3 3
+
+#define THS7353_DEF_LUMA_CHANNEL 2
+
+/* all supported modes */
+enum ths7353_filter_mode {
+ THS_FILTER_MODE_480I_576I,
+ THS_FILTER_MODE_480P_576P,
+ THS_FILTER_MODE_720P_1080I,
+ THS_FILTER_MODE_1080P
+};
+
+static int ths7353_luma_channel;
+
+/* following function is used to set ths7353 */
+static int ths7353_setvalue(struct v4l2_subdev *sd,
+ enum ths7353_filter_mode mode)
+{
+ u8 val = 0, input_bias_luma = 5, input_bias_chroma = 4, temp;
+ struct i2c_client *client;
+ int err, disable;
+ int channel = 3;
+
+ client = v4l2_get_subdevdata(sd);
+
+ switch (mode) {
+ case THS_FILTER_MODE_1080P:
+ /* LPF - 5MHz */
+ val = (3 << 6);
+ /* LPF - bypass */
+ val |= (3 << 3);
+ break;
+ case THS_FILTER_MODE_720P_1080I:
+ /* LPF - 5MHz */
+ val = (2 << 6);
+ /* LPF - 35 MHz */
+ val |= (2 << 3);
+ break;
+ case THS_FILTER_MODE_480P_576P:
+ /* LPF - 2.5MHz */
+ val = (1 << 6);
+ /* LPF - 16 MHz */
+ val |= (1 << 3);
+ break;
+ case THS_FILTER_MODE_480I_576I:
+ /* LPF - 500 KHz, LPF - 9 MHz. Do nothing */
+ break;
+ default:
+ /* disable all channels */
+ disable = 1;
+ }
+
+ channel = ths7353_luma_channel;
+
+ /* Setup channel 2 - Luma - Green */
+ temp = val;
+ if (!disable)
+ val |= input_bias_luma;
+ err = i2c_smbus_write_byte_data(client, channel, val);
+ if (err)
+ goto out;
+
+ /* setup two chroma channels */
+ if (!disable)
+ temp |= input_bias_chroma;
+ channel++;
+ if (channel > THS7353_CHANNEL_3)
+ channel = THS7353_CHANNEL_1;
+ err = i2c_smbus_write_byte_data(client, channel, temp);
+ if (err)
+ goto out;
+
+ channel++;
+ if (channel > THS7353_CHANNEL_3)
+ channel = THS7353_CHANNEL_1;
+ err = i2c_smbus_write_byte_data(client, channel, temp);
+ if (err)
+ goto out;
+
+ return 0;
+
+out:
+ v4l2_err(sd, "ths7353 write failed\n");
+ return err;
+}
+
+static int ths7353_s_preset(struct v4l2_subdev *sd,
+ struct v4l2_dv_preset *preset)
+{
+ switch (preset->preset) {
+ case V4L2_DV_576P50:
+ case V4L2_DV_480P59_94:
+ return ths7353_setvalue(sd, THS_FILTER_MODE_480P_576P);
+
+ case V4L2_DV_720P50:
+ case V4L2_DV_720P60:
+ case V4L2_DV_1080I60:
+ case V4L2_DV_1080I50:
+ return ths7353_setvalue(sd, THS_FILTER_MODE_720P_1080I);
+
+ case V4L2_DV_1080P60:
+ return ths7353_setvalue(sd, THS_FILTER_MODE_1080P);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ths7353_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_THS7353, 0);
+}
+
+static const struct v4l2_subdev_video_ops ths7353_video_ops = {
+ .s_dv_preset = ths7353_s_preset,
+};
+
+static const struct v4l2_subdev_core_ops ths7353_core_ops = {
+ .g_chip_ident = ths7353_g_chip_ident,
+};
+
+static const struct v4l2_subdev_ops ths7353_ops = {
+ .core = &ths7353_core_ops,
+ .video = &ths7353_video_ops,
+};
+
+static int ths7353_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct v4l2_subdev *sd;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ v4l_info(client, "chip found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ if (!client->dev.platform_data) {
+ v4l_warn(client, "No platform data!!\n");
+ ths7353_luma_channel = THS7353_DEF_LUMA_CHANNEL;
+ } else {
+ ths7353_luma_channel = (int)(client->dev.platform_data);
+ if (ths7353_luma_channel < THS7353_CHANNEL_1 ||
+ ths7353_luma_channel > THS7353_CHANNEL_3) {
+ v4l_warn(client, "Invalid Luma Channel!!\n");
+ ths7353_luma_channel = THS7353_DEF_LUMA_CHANNEL;
+ }
+ }
+
+ sd = devm_kzalloc(&client->dev, sizeof(struct v4l2_subdev), GFP_KERNEL);
+ if (sd == NULL)
+ return -ENOMEM;
+
+ v4l2_i2c_subdev_init(sd, client, &ths7353_ops);
+ strlcpy(sd->name, "ths7353", sizeof(sd->name));
+
+ return ths7353_setvalue(sd, THS_FILTER_MODE_480I_576I);
+}
+
+static int ths7353_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ v4l2_device_unregister_subdev(sd);
+
+ return 0;
+}
+
+static const struct i2c_device_id ths7353_id[] = {
+ {"ths7353", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, ths7353_id);
+
+static struct i2c_driver ths7353_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ths7353",
+ },
+ .probe = ths7353_probe,
+ .remove = ths7353_remove,
+ .id_table = ths7353_id,
+};
+
+module_i2c_driver(ths7353_driver);
+
+MODULE_DESCRIPTION("TI THS7353 video amplifier driver");
+MODULE_AUTHOR("Muralidharan Karicheri");
+MODULE_LICENSE("GPL");
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists