| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1359449839-17742-1-git-send-email-fabio.baltieri@linaro.org>
Date: Tue, 29 Jan 2013 09:57:19 +0100
From: Fabio Baltieri <fabio.baltieri@...aro.org>
To: Wim Van Sebroeck <wim@...ana.be>,
Samuel Ortiz <sameo@...ux.intel.com>,
linux-watchdog@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Lee Jones <lee.jones@...aro.org>,
Srinidhi Kasagar <srinidhi.kasagar@...ricsson.com>,
Fabio Baltieri <fabio.baltieri@...aro.org>
Subject: [PATCH v2 3/4] watchdog: add support for ux500_wdt watchdog
This patch adds support for the ux500_wdt watchdog that is found in
ST-Ericsson Ux500 platform. The driver is based on PRCMU APIs.
Acked-by: Linus Walleij <linus.walleij@...aro.org>
Acked-by: Lee Jones <lee.jones@...aro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@...aro.org>
---
Changes from v1:
- changed timeout as unsigned in both module parameter and pdata
- changed nowayout to bool
- added Linus Walleij's Ack
drivers/watchdog/Kconfig | 12 +++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/ux500_wdt.c | 171 ++++++++++++++++++++++++++++++++
include/linux/platform_data/ux500_wdt.h | 19 ++++
4 files changed, 203 insertions(+)
create mode 100644 drivers/watchdog/ux500_wdt.c
create mode 100644 include/linux/platform_data/ux500_wdt.h
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 7f809fd..26e1fdb 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -364,6 +364,18 @@ config IMX2_WDT
To compile this driver as a module, choose M here: the
module will be called imx2_wdt.
+config UX500_WATCHDOG
+ tristate "ST-Ericsson Ux500 watchdog"
+ depends on MFD_DB8500_PRCMU
+ select WATCHDOG_CORE
+ default y
+ help
+ Say Y here to include Watchdog timer support for the watchdog
+ existing in the prcmu of ST-Ericsson Ux500 series platforms.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ux500_wdt.
+
# AVR32 Architecture
config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 97bbdb3a..bec86ee 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
+obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/ux500_wdt.c b/drivers/watchdog/ux500_wdt.c
new file mode 100644
index 0000000..a614d84
--- /dev/null
+++ b/drivers/watchdog/ux500_wdt.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011-2013
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Mathieu Poirier <mathieu.poirier@...aro.org> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@...ricsson.com> for ST-Ericsson
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/ux500_wdt.h>
+
+#include <linux/mfd/dbx500-prcmu.h>
+
+#define WATCHDOG_TIMEOUT 600 /* 10 minutes */
+
+#define WATCHDOG_MIN 0
+#define WATCHDOG_MAX28 268435 /* 28 bit resolution in ms == 268435.455 s */
+#define WATCHDOG_MAX32 4294967 /* 32 bit resolution in ms == 4294967.295 s */
+
+static unsigned int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+ "Watchdog timeout in seconds. default="
+ __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int ux500_wdt_start(struct watchdog_device *wdd)
+{
+ return prcmu_enable_a9wdog(PRCMU_WDOG_ALL);
+}
+
+static int ux500_wdt_stop(struct watchdog_device *wdd)
+{
+ return prcmu_disable_a9wdog(PRCMU_WDOG_ALL);
+}
+
+static int ux500_wdt_keepalive(struct watchdog_device *wdd)
+{
+ return prcmu_kick_a9wdog(PRCMU_WDOG_ALL);
+}
+
+static int ux500_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ ux500_wdt_stop(wdd);
+ prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
+ ux500_wdt_start(wdd);
+
+ return 0;
+}
+
+static const struct watchdog_info ux500_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "Ux500 WDT",
+ .firmware_version = 1,
+};
+
+static const struct watchdog_ops ux500_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = ux500_wdt_start,
+ .stop = ux500_wdt_stop,
+ .ping = ux500_wdt_keepalive,
+ .set_timeout = ux500_wdt_set_timeout,
+};
+
+static struct watchdog_device ux500_wdt = {
+ .info = &ux500_wdt_info,
+ .ops = &ux500_wdt_ops,
+ .min_timeout = WATCHDOG_MIN,
+ .max_timeout = WATCHDOG_MAX32,
+};
+
+static int ux500_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct ux500_wdt_data *pdata = pdev->dev.platform_data;
+
+ if (pdata) {
+ if (pdata->timeout > 0)
+ timeout = pdata->timeout;
+ if (pdata->has_28_bits_resolution)
+ ux500_wdt.max_timeout = WATCHDOG_MAX28;
+ }
+
+ watchdog_set_nowayout(&ux500_wdt, nowayout);
+
+ /* disable auto off on sleep */
+ prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
+
+ /* set HW initial value */
+ prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
+
+ ret = watchdog_register_device(&ux500_wdt);
+ if (ret)
+ return ret;
+
+ dev_info(&pdev->dev, "initialized\n");
+
+ return 0;
+}
+
+static int ux500_wdt_remove(struct platform_device *dev)
+{
+ watchdog_unregister_device(&ux500_wdt);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ux500_wdt_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ if (watchdog_active(&ux500_wdt)) {
+ ux500_wdt_stop(&ux500_wdt);
+ prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true);
+
+ prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
+ ux500_wdt_start(&ux500_wdt);
+ }
+ return 0;
+}
+
+static int ux500_wdt_resume(struct platform_device *pdev)
+{
+ if (watchdog_active(&ux500_wdt)) {
+ ux500_wdt_stop(&ux500_wdt);
+ prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
+
+ prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
+ ux500_wdt_start(&ux500_wdt);
+ }
+ return 0;
+}
+#else
+#define ux500_wdt_suspend NULL
+#define ux500_wdt_resume NULL
+#endif
+
+static struct platform_driver ux500_wdt_driver = {
+ .probe = ux500_wdt_probe,
+ .remove = ux500_wdt_remove,
+ .suspend = ux500_wdt_suspend,
+ .resume = ux500_wdt_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ux500_wdt",
+ },
+};
+
+module_platform_driver(ux500_wdt_driver);
+
+MODULE_AUTHOR("Jonas Aaberg <jonas.aberg@...ricsson.com>");
+MODULE_DESCRIPTION("Ux500 Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:ux500_wdt");
diff --git a/include/linux/platform_data/ux500_wdt.h b/include/linux/platform_data/ux500_wdt.h
new file mode 100644
index 0000000..1689ff4
--- /dev/null
+++ b/include/linux/platform_data/ux500_wdt.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) ST Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * STE Ux500 Watchdog platform data
+ */
+#ifndef __UX500_WDT_H
+#define __UX500_WDT_H
+
+/**
+ * struct ux500_wdt_data
+ */
+struct ux500_wdt_data {
+ unsigned int timeout;
+ bool has_28_bits_resolution;
+};
+
+#endif /* __UX500_WDT_H */
--
1.7.12.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists