| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130129164131.GN18212@gmail.com>
Date: Tue, 29 Jan 2013 16:41:31 +0000
From: Lee Jones <lee.jones@...aro.org>
To: broonie@...nsource.wolfsonmicro.com
Cc: linux-kernel@...r.kernel.org, linus.walleij@...aro.org
Subject: [GIT PULL][FOR REVIEW] Regulators: Bring the AB8500 into the 20th
century
Hi Mark,
As requested, the whole-shebang.
The Mainline AB8500 and DB8500 regulators are currently stuck in the
Victorian era (AKA v2.6.35). This branch contains all of the
upstreamable changes that have occurred on the internal repository and
aims to bring them back into the 20th century.
If you'd like me to sent the patches to the MLs for a better review
platform I can do, but I'd like to get permission before I go and
start upsetting people.
This branch contains 111 patches and has already gone though multiple
cycles of fixing-up, squashing, splitting and revert removal.
Enjoy!
Kind regards,
Lee
---
The following changes since commit 949db153b6466c6f7cad5a427ecea94985927311:
Linux 3.8-rc5 (2013-01-25 11:57:28 -0800)
are available in the git repository at:
git://git.linaro.org/people/ljones/linux-3.0-ux500.git tb-regulators
for you to fetch changes up to d3887ef58b60106677354e2f1314bc0f7cdeebf6:
regulator: dbx500-prcmu: Add write access to reg_state and reg_name
(2013-01-29 16:27:55 +0000)
----------------------------------------------------------------
Alexandre Torgue (2):
regulator: ab8500: Provide full settings for AB8540 regulators
regulator: ab8500: Correct init mask for AB8540
Bengt Jonsson (32):
regulator: Suspend force is activated for power save profile
regulator: ab8500-debug: Force off VextSupply3
regulator: ab8500-debug: Fix build error when no CONFIG_PM
regulator: ab8500-debug: Added debug function to record
regulator registers
regulator: ab8500-debug: Change board version numbering
regulator: ab8500-debug: Removed ARM-controlled regulators from
suspend-force
regulator: Initialize Vrf1 regulator
regulator: Removed suspend force of Vsmps1 and Vsmps2
regulator: Added SysClkReq1 control of Vpll
ARM: ux500: Vsmps3 controlled by SysClkReq1
regulator: ab8500: Fix for regulator_set_mode functionality
regulator: ab8500: Added get_optimum_mode on regulators with
idle mode
regulator: ab8500-debug: Remove force of VextSupplies on AB 3.x
ARM: ux500: regulators: Add mask for configuration
regulator: ab8500: Added more configurable bits
regulator: ab8500: Removed initialization of body biasing
regulator: ab8500-debug: Do not disable Vext3 during suspend
regulator: ab8500: Separate regulator and MFD platform data
regulator: ab8500: Add support of low voltage battery
regulator: ab8500-ext: Cosmetic changes
regulator: ab8500-ext: Add HW request support
regulator: ab8500-ext: Add suspend support
regulator: ab8500-ext: Add regulator_set_mode/get_mode
regulator: ab8500-ext: Add VextSupply1 regulator
regulator: ab8500-ext: Add VextSupply2 regulator
regulator: ab8500: Remove USB regulator
regulator: ab8500: Set current debug state as default
regulator: ab8500: Remove Vsafe voltage settings
regulator: ab8500: Remove Vsafe settings
regulator: ab8500: Clean out SoC registers
regulator: ab8500-debug: Remove TVOUTCTRL
regulator: ab8500-ext: Add support for AB8505/AB9540
Carl-Johan Irekvist (1):
regulator: ab8500-debug: Change boot-info address
Daniel WILLERUD (1):
regulator: ab8500: Add AB8505 register initialization
David Paris (1):
regulator: ab8500: Update VAna supply management for the AB9540
Emeric Vigier (1):
regulator: ab8500: Add set_mode/get_mode support
Gabriel Fernandez (3):
regulator: ab8500-ext: Adapt regulator registration for newly
changed API
regulator: ab8500: Use a struct to select the good regulator
configuration
regulator: of: Add regulator Device Tree properties
Jonas Aaberg (4):
regulator: ab8500: Correct TVOUT regulator start-up delay
regulator: ab8500-debug: Add read regulator status
regulator: dbx500-prcmu: debug: Fast path usage info
regulator: ab8500: Remove surplus include of id.h
Jorgen Jonsson (1):
regulator: ab8500-debug: Remove not needed registers for AB8505
Lee Jones (21):
regulator: Possibility to force extsupplies down in suspend
regulator: Show consumers that hold a regulator in Sysfs
ARM: ux500: Update displays in vaux1 consumer list
regulator: ab8500: Init debug from regulator driver
ARM: ux500: Add supply for the L3G4200D Gyroscope
ARM: ux500: Add supply for the Proximity and Hal sensor
ARM: ux500: Add supply for the Ambient light sensor device
ARM: ux500: Add supply for the Pressure sensor
ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen
ARM: ux500: Add supply for the MMIO Camera
regulator: ab8500: Add support for the AB9540
ARM: ux500: regulator: Use device IDs instead of device names
regulator: ab8500-debug: Reorder update and save regulator
registers
regulator: ab8500-debug: Tiny cosmetic change
regulator: ab8500-debug: Reorder the AB8500_REGU_VREF_DDR
regulator: ab8500-debug: Add an update entry for
AB8500_OTHER_TVOUT_CTRL
regulator: dbx500: Place file in correct order
regulator: ab8500: Use regulator_list_voltage_table()
regulator: ab8500-debug: Fix suspend-force
regulator: ab8500: Provide DT support for additional platforms
regulator: ab8500-debug: Remove use of TVoutCtrl register
Loic Pallardy (1):
regulator: dbx500-prcmu: Update debugfs services
Marcus Cooper (5):
regulator: ab8500: Vaux5/6 cannot be disabled on the AB8540
regulator: ab8500-debug: Add debugFS info for aux5/6
regulator: ab8500: Correct regulator id values
regulator: ab8500-debug: Move ab9540 specific settings to its
own struct
regulator: ab8500: Regulator vaux8 not declared using correct
name
Marcus Danielsson (1):
regulator: ab8500-debug: Fix coverity issue
Martin Persson (6):
regulator: ab8500-debug: Update debugfs' ext regulator settings
regulator: ab8500-debug: Added forced regulator registers in
suspend
regulator: ab8500-debug: Restore regulator registers in reverse
order
regulator: ab8500-debug: Remove vana and vpll from suspend force
regulator: ab8500: Remove VBB from suspend force
regulator: Add init values for vsmps1/2
Mattias Wallin (6):
regulator: ab8500-debug: AB8505 debug settings not initialized
regulator: ab8500: add support for ab8505
regulator: ab8500: Provide ExtSupply register init values for
AB8505
regulator: ab8500: Change mode fix for LDO USB
ARM: ux500: regulators: Add LDO USB consumer
regulator: ab8500: Default value on LDO USB to HP
Mian Yousaf Kaukab (3):
regulator: ab8500-debug: Update the VextSupplies fix
regulator: ab8500-debug: Update suspend force value for
ExtSupplyRegu
regulator: dbx500-prcmu: Show status of atomic regulators
Michel JAOUEN (2):
regulator: ab8500-ext: Add support for AB9540 regulators
regulator: ab8500: Update AB9540 init masks
Mustapha Ben Zoubeir (1):
regulator: ab8500: Delete useless fixed_uV field
Philippe Langlais (3):
regulator: ab8500: dbx500: Add module.h for when building as a
module
ARM: ux500: Partially revert changes surrounding audio
regulators
regulator: dbx500-prcmu: Provide atomic regulators
Rabin Vincent (5):
regulator: ab8500: Remove bogus error messages
ARM ux500: Remove external regulators from AB8505 init data
regulator: ab8500: Don't register external regulators on AB8505
regulator: ab8500: Add voltage selection for AUDIO and ANA on
AB8505
regulator: ab8500-debug: Remove incorrect error messages
Rickard Andersson (1):
regulator: ab8500: Add mode operation for v-amic
Zhenhua HUANG (6):
regulator: ab8500: Add VSDIO definition for the AB8540
regulator: ab8500: Fix vsdio parameters for AB8540 based
platforms
regulator: ab8500: Remove vusb from AB8540 regulator framework
regulator: ab8500: Update vdmic, vamic[1|2] parameters for
AB8540
regulator: ab8500: Introduce aux5, aux6 regulators for AB8540
regulator: dbx500-prcmu: Add write access to reg_state and
reg_name
carriere etienne (2):
regulator: dbx500-prcmu: Support DB8540 new ePODs
regulator: db8500-prcmu: Fix esram23 name when relating to
DB8540
xiaomei.zhang (2):
regulator: ab8500: Also check for AB8505 based platforms
regulator: ab8500: Add new operations for Vaux3
.../devicetree/bindings/regulator/regulator.txt | 5 +
arch/arm/mach-ux500/board-mop500-regulators.c | 749 ++++-
arch/arm/mach-ux500/board-mop500-regulators.h | 7 +-
drivers/mfd/ab8500-core.c | 3 +
drivers/regulator/Kconfig | 16 +
drivers/regulator/Makefile | 2 +
drivers/regulator/ab8500-debug.c | 2154
+++++++++++++++
drivers/regulator/ab8500-debug.h | 83 +
drivers/regulator/ab8500-ext.c | 475 ++++
drivers/regulator/ab8500.c | 2850
++++++++++++++++++--
drivers/regulator/core.c | 37 +
drivers/regulator/db8500-prcmu.c | 70 +-
drivers/regulator/dbx500-prcmu.c | 322 ++-
drivers/regulator/dbx500-prcmu.h | 3 +-
drivers/regulator/of_regulator.c | 18 +
include/linux/regulator/ab8500-debug.h | 16 +
include/linux/regulator/ab8500.h | 216 +-
include/linux/regulator/db8500-prcmu.h | 7 +-
include/linux/regulator/dbx500-prcmu.h | 92 +
19 files changed, 6858 insertions(+), 267 deletions(-)
create mode 100644 drivers/regulator/ab8500-debug.c
create mode 100644 drivers/regulator/ab8500-debug.h
create mode 100644 drivers/regulator/ab8500-ext.c
create mode 100644 include/linux/regulator/ab8500-debug.h
create mode 100644 include/linux/regulator/dbx500-prcmu.h
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists