lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 30 Jan 2013 11:06:10 +0200 From: Luciano Coelho <coelho@...com> To: Santosh Shilimkar <santosh.shilimkar@...com> CC: "Kumar, Anil" <anilkumar.v@...com>, "Poddar, Sourav" <sourav.poddar@...com>, "Cousson, Benoit" <b-cousson@...com>, "tony@...mide.com" <tony@...mide.com>, "devicetree-discuss@...ts.ozlabs.org" <devicetree-discuss@...ts.ozlabs.org>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, "Balbi, Felipe" <balbi@...com>, "linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>, "linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>, "Vishwanathrao Badarkhe, Manish" <manishv.b@...com> Subject: Re: [PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data On Wed, 2013-01-30 at 14:18 +0530, Santosh Shilimkar wrote: > On Wednesday 30 January 2013 02:13 PM, Kumar, Anil wrote: > > Hi Sourav, > > > > On Wed, Jan 30, 2013 at 12:10:18, Poddar, Sourav wrote: > >> Hi Luciano, > >> On Wednesday 30 January 2013 11:55 AM, Luciano Coelho wrote: > >>> Hi Sourav, > >>> > >>> On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote: > >>>> Booting 3.8-rc4 om omap 4430sdp results in the following error > >>>> > >>>> omap_i2c 48070000.i2c: did not get pins for i2c error: -19 > >>>> [ 1.024261] omap_i2c 48070000.i2c: bus 0 rev0.12 at 100 kHz > >>>> [ 1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 > >>>> [ 1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz > >>>> [ 1.043762] omap_i2c 48060000.i2c: did not get pins for i2c error: -19 > >>>> [ 1.050964] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz > >>>> [ 1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19 > >>>> [ 1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz > >>>> > >>>> This happens because omap4 dts file is not adapted to use i2c through pinctrl > >>>> framework. Populating i2c pinctrl data to get rid of the error. > >>>> > >>>> Tested on omap4430 sdp with 3.8-rc4 kernel. > >>>> > >>>> Signed-off-by: Sourav Poddar <sourav.poddar@...com> > >>>> Reported-by: Santosh Shilimkar <santosh.shilimkar@...com> > >>>> --- > >>> Could you do the same thing for panda? I'm getting the same kind of > >>> errors with it: > > > > omap4 uses pinctrl-single driver for pinmux with DT. Currently > > pinctrl-single driver is getting up after I2C driver. So I2c cannot > > use pinctrl. The below patch solve this issue > > > > http://www.gossamer-threads.com/lists/linux/kernel/1669067 > > > > Can you try with this ? it may solve it. > > > OMAP i2c driver already takes care of -EPROBE_DEFER. The issue > as you see from the log is not probe failure but missing the > pin information in DT blob. And thats what patch does. Yes, Santosh is right. I tried this patch, but it didn't fix the warnings. -- Luca. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists