| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1359551685.17639.92.camel@gandalf.local.home> Date: Wed, 30 Jan 2013 08:14:45 -0500 From: Steven Rostedt <rostedt@...dmis.org> To: Lee Jones <lee.jones@...aro.org> Cc: Linus Walleij <linus.walleij@...aro.org>, LKML <linux-kernel@...r.kernel.org>, linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>, Ulf Hansson <ulf.hansson@...aro.org>, Mike Turquette <mturquette@...aro.org> Subject: Re: [BUG] snowball board locks up on boot On Wed, 2013-01-30 at 09:01 +0000, Lee Jones wrote: > Can you provide your bootlog please Steven? > Here's the bootlog after I reverted the patch and successfully booted: Card did not respond to voltage select! smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 46:36:d8:d6:64:4c BOOTP broadcast 1 BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 2 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.23.75 Using smc911x-0 device TFTP from server 192.168.23.10; our IP address is 192.168.23.75 Filename 'snowball/image'. Load address: 0x100000 Loading: *.################################################################# ################################################################# ################################################################# ################################################################# ################################## done Bytes transferred = 4315824 (41dab0 hex) ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux-3.8.0-rc4-test+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4315760 Bytes = 4.1 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x300 [ 0.000000] Linux version 3.8.0-rc4-test+ (rostedt@...iath) (gcc version 4.5.2 (GCC) ) #278 SMP PREEMPT Thu Jan 24 11:54:10 EST 2013 [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Calao Systems Snowball platform [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] DB8500 v2.1 [0x008500b1] [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1162000 s13376 r8192 d15296 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 206848 [ 0.000000] Kernel command line: console=ttyAMA2,115200n8 vmalloc=256M root=/dev/mmcblk0p3 rootwait mem=128M@0 mali.mali_mem=32M@...M hwmem=168M@...M mem=48M@...M mem_issw=1M@...M mem=640M@...M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Memory: 128MB 48MB 640MB = 816MB total [ 0.000000] Memory: 818568k/818568k available, 17016k reserved, 278528K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xef800000 - 0xff000000 ( 248 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef000000 ( 752 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0822024 (8297 kB) [ 0.000000] .init : 0xc0823000 - 0xc0871440 ( 314 kB) [ 0.000000] .data : 0xc0872000 - 0xc08cc5d0 ( 362 kB) [ 0.000000] .bss : 0xc08cc5d0 - 0xc095a880 ( 569 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] PRCMU firmware: U8500, version 3.4.9 [ 0.000000] MTU0 clock rate: 133330000 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000488] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816) [ 0.090179] pid_max: default: 32768 minimum: 301 [ 0.090393] Security Framework initialized [ 0.090484] AppArmor: AppArmor initialized [ 0.090606] Mount-cache hash table entries: 512 [ 0.091705] Initializing cgroup subsys cpuacct [ 0.091796] CPU: Testing write buffer coherency: ok [ 0.091888] ftrace: allocating 20559 entries in 61 pages [ 0.137756] CPU0: thread -1, cpu 0, socket 3, mpidr 80000300 [ 0.137878] Setting up static identity map for 0x5b6450 - 0x5b64a8 [ 0.137939] L310 cache controller enabled [ 0.137969] l2x0: 8 ways, CACHE_ID 0x000000c0, AUX_CTRL 0x7ec60800, Cache size: 524288 B [ 0.238708] CPU1: Booted secondary processor [ 0.313140] CPU1: thread -1, cpu 1, socket 3, mpidr 80000301 [ 0.313201] Brought up 2 CPUs [ 0.313201] SMP: Total of 2 processors activated (3588.09 BogoMIPS). [ 0.313934] devtmpfs: initialized [ 0.318908] pinctrl core: initialized pinctrl subsystem [ 0.320159] regulator-dummy: no parameters [ 0.321075] NET: Registered protocol family 16 [ 0.321960] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.325164] gpio gpio.0: at address f812e000 [ 0.326019] gpio gpio.1: at address f812e080 [ 0.326812] gpio gpio.2: at address f800e000 [ 0.327667] gpio gpio.3: at address f800e080 [ 0.328460] gpio gpio.4: at address f800e100 [ 0.329315] gpio gpio.5: at address f800e180 [ 0.330200] gpio gpio.6: at address f811e000 [ 0.331054] gpio gpio.7: at address f811e080 [ 0.331939] gpio gpio.8: at address fa3fe000 [ 0.333099] pinctrl-nomadik pinctrl-db8500: initialized Nomadik pin control driver [ 0.334991] ab8500-core ab8500-core.0: detected chip, AB8500 rev. 3.0 [ 0.335052] ab8500-core ab8500-core.0: switch off cause(s) (0x20): [ 0.335052] "Battery level lower than power on reset threshold" [ 0.341369] DB8500 PRCMU initialized [ 0.344024] mop500_audio_init: Register platform-device 'snd-soc-mop500'. [ 0.344238] Initialize MSP I2S-devices. [ 0.344268] Register platform-device 'ux500-msp-i2s', id 0, irq 63 [ 0.344451] Register platform-device 'ux500-msp-i2s', id 1, irq 94 [ 0.344665] Register platform-device 'ux500-msp-i2s', id 2, irq 130 [ 0.344848] Register platform-device 'ux500-msp-i2s', id 3, irq 94 [ 0.345764] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.345794] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.346343] db8500-vape: no parameters [ 0.346679] db8500-varm: no parameters [ 0.346984] db8500-vmodem: no parameters [ 0.347259] db8500-vpll: no parameters [ 0.347534] db8500-vsmps1: no parameters [ 0.347808] db8500-vsmps2: no parameters [ 0.348114] db8500-vsmps3: no parameters [ 0.348388] db8500-vrf1: no parameters [ 0.348724] db8500-sva-mmdsp: no parameters [ 0.348999] db8500-sva-mmdsp-ret: no parameters [ 0.349273] db8500-sva-pipe: no parameters [ 0.349578] db8500-sia-mmdsp: no parameters [ 0.349853] db8500-sia-mmdsp-ret: no parameters [ 0.350128] db8500-sia-pipe: no parameters [ 0.350433] db8500-sga: no parameters [ 0.350463] db8500-sga: supplied by db8500-vape [ 0.351135] db8500-b2r2-mcde: no parameters [ 0.351165] db8500-b2r2-mcde: supplied by db8500-vape [ 0.351531] db8500-esram12: no parameters [ 0.351837] db8500-esram12-ret: no parameters [ 0.352111] db8500-esram34: no parameters [ 0.352386] db8500-esram34-ret: no parameters [ 0.352691] Serial: AMBA PL011 UART driver [ 0.352874] uart0: ttyAMA0 at MMIO 0x80120000 (irq = 43) is a PL011 rev3 [ 0.353424] uart1: ttyAMA1 at MMIO 0x80121000 (irq = 51) is a PL011 rev3 [ 0.353912] uart2: ttyAMA2 at MMIO 0x80007000 (irq = 58) is a PL011 rev3 [ 0.901672] console [ttyAMA2] enabled [ 0.926879] bio: create slab <bio-0> at 0 [ 0.931762] dma40 dma40.0: hardware revision: 3 @ 0x801c0000 [ 0.937469] dma40 dma40.0: 7 of 8 physical DMA channels available [ 0.943603] dma40 dma40.0: [d40_phy_res_init] INFO: channel 4 is misconfigured (0) [ 0.951171] dma40 dma40.0: [d40_phy_res_init] INFO: channel 5 is misconfigured (0) [ 0.958740] dma40 dma40.0: [d40_phy_res_init] INFO: channel 6 is misconfigured (0) [ 0.982788] dma40 dma40.0: initialized [ 0.987060] EN-3V3: Failed to request enable GPIO337: -517 [ 0.992767] reg-fixed-voltage reg-fixed-voltage.1: Failed to register regulator: -517 [ 1.000610] platform reg-fixed-voltage.1: Driver reg-fixed-voltage requests probe deferral [ 1.010345] V-DISPLAY: 2500 <--> 2900 mV at 2500 mV [ 1.015777] V-eMMC1: 1100 <--> 3300 mV at 2900 mV [ 1.020935] V-MMC-SD: 1200 <--> 2910 mV at 2910 mV [ 1.026184] V-INTCORE: at 1250 mV [ 1.030029] V-TVOUT: 2000 mV [ 1.033294] LDO-USB: 3300 mV [ 1.036529] V-AUD: 2000 mV [ 1.039672] V-AMIC1: 2050 mV [ 1.042907] V-AMIC2: 2050 mV [ 1.046173] V-DMIC: 1800 mV [ 1.049346] V-CSI/DSI: 1200 mV [ 1.052551] V-CSI/DSI: Failed to create debugfs directory [ 1.060028] SCSI subsystem initialized [ 1.063842] ssp-pl022 ssp0: ARM PL022 driver, device ID: 0x01080022 [ 1.070190] ssp-pl022 ssp0: could not get default pinstate [ 1.075714] pl022: mapped registers from 0x80002000 to ef860000 [ 1.081726] ssp-pl022 ssp0: setup for DMA on RX dma0chan0, TX dma0chan1 [ 1.089843] usbcore: registered new interface driver usbfs [ 1.095520] usbcore: registered new interface driver hub [ 1.101043] usbcore: registered new device driver usb [ 1.106353] ab8500-usb ab8500-usb.0: AB8500 usb driver initialized [ 1.113372] nmk-i2c nmk-i2c.0: initialize Nomadik I2C0 at [mem 0x80004000-0x80004fff] on virtual base ef862000 [ 1.123748] nmk-i2c nmk-i2c.1: initialize Nomadik I2C1 at [mem 0x80122000-0x80122fff] on virtual base ef864000 [ 1.134094] nmk-i2c nmk-i2c.2: initialize Nomadik I2C2 at [mem 0x80128000-0x80128fff] on virtual base ef866000 [ 1.144439] nmk-i2c nmk-i2c.3: initialize Nomadik I2C3 at [mem 0x80110000-0x80110fff] on virtual base ef868000 [ 1.155792] Advanced Linux Sound Architecture Driver Initialized. [ 1.162902] Bluetooth: Core ver 2.16 [ 1.166717] NET: Registered protocol family 31 [ 1.171142] Bluetooth: HCI device and connection manager initialized [ 1.177520] Bluetooth: HCI socket layer initialized [ 1.182403] Bluetooth: L2CAP socket layer initialized [ 1.187469] Bluetooth: SCO socket layer initialized [ 1.192901] cfg80211: Calling CRDA to update world regulatory domain [ 1.199432] NetLabel: Initializing [ 1.202880] NetLabel: domain hash size = 128 [ 1.207244] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.212249] NetLabel: unlabeled traffic allowed by default [ 1.219024] ab8500-charger ab8500-charger.0: falling back to legacy platform data [ 1.226623] ab8500-charger ab8500-charger.0: failed to get vddadc regulator [ 1.233673] platform ab8500-charger.0: Driver ab8500-charger requests probe deferral [ 1.241668] ab8500-btemp ab8500-btemp.0: falling back to legacy platform data [ 1.248992] ab8500-btemp ab8500-btemp.0: No fg found [ 1.253997] ab8500-btemp ab8500-btemp.0: ab8500_btemp_id get batctrl res failed [ 1.261291] ab8500-btemp ab8500-btemp.0: failed to identify the battery [ 1.277252] ab8500-fg ab8500-fg.0: falling back to legacy platform data [ 1.289733] Switching to clocksource dbx500-prcmu-timer [ 1.319610] AppArmor: AppArmor Filesystem Enabled [ 1.353912] NET: Registered protocol family 2 [ 1.359039] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 1.366210] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.372833] TCP: Hash tables configured (established 8192 bind 8192) [ 1.379425] TCP: reno registered [ 1.382659] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.388671] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.395355] NET: Registered protocol family 1 [ 1.400573] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.407196] CPU PMU: probing PMU on CPU 0 [ 1.411224] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 1.420837] audit: initializing netlink socket (disabled) [ 1.426269] type=2000 audit(1.130:1): initialized [ 1.445343] bounce pool size: 64 pages [ 1.449371] VFS: Disk quotas dquot_6.5.2 [ 1.453430] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.460632] 9p: Installing v9fs 9p2000 file system support [ 1.466156] msgmni has been set to 1054 [ 1.471069] io scheduler noop registered [ 1.474975] io scheduler deadline registered (default) [ 1.480285] io scheduler cfq registered [ 1.485229] uart-pl011 uart0: DMA channel TX dma0chan2 [ 1.490417] uart-pl011 uart0: DMA channel RX dma0chan3 [ 1.495544] uart-pl011 uart1: DMA channel TX dma0chan4 [ 1.500732] uart-pl011 uart1: DMA channel RX dma0chan5 [ 1.505889] uart-pl011 uart2: DMA channel TX dma0chan6 [ 1.511047] uart-pl011 uart2: DMA channel RX dma0chan7 [ 1.516540] [drm] Initialized drm 1.1.0 20060810 [ 1.532897] brd: module loaded [ 1.542419] loop: module loaded [ 1.546844] tun: Universal TUN/TAP device driver, 1.6 [ 1.551940] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com> [ 1.558898] smsc911x: Driver version 2008-10-21 [ 1.563537] smsc911x smsc911x.0: Failed to get supply 'vdd33a': -517 [ 1.570434] smsc911x smsc911x.0 (unregistered net_device): couldn't get regulators -517 [ 1.578552] platform smsc911x.0: Driver smsc911x requests probe deferral [ 1.585449] PPP generic driver version 2.4.2 [ 1.590209] PPP MPPE Compression module registered [ 1.595642] usbcore: registered new interface driver cdc_acm [ 1.601348] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.609405] Initializing USB Mass Storage driver... [ 1.614501] usbcore: registered new interface driver usb-storage [ 1.620574] USB Mass Storage support registered. [ 1.625183] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 1.633972] input: AB8500 POn(PowerOn) Key as /devices/soc0/db8500-prcmu.0/ab8500-core.0/ab8500-poweron-key.0/input/input0 [ 1.662811] ab8500-rtc ab8500-rtc.0: rtc core: registered ab8500-rtc as rtc0 [ 1.670257] i2c /dev entries driver [ 1.675018] ab8500-chargalg ab8500-chargalg.0: falling back to legacy platform data [ 1.683166] ab8500-chargalg ab8500-chargalg.0: probe success [ 1.689331] device-mapper: uevent: version 1.0.3 [ 1.694274] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@...hat.com [ 1.702789] Bluetooth: HCI UART driver ver 2.2 [ 1.707336] cpufreq for DB8500 started [ 1.711151] db8500-cpufreq : Failed to get armss clk [ 1.716125] db8500-cpufreq : Failed to get armss clk [ 1.721435] cpuidle: using governor ladder [ 1.725677] cpuidle: using governor menu [ 1.730682] mmci-pl18x sdi4: Provided ocr_mask/setpower will not be used (using regulator instead) [ 1.739746] mmci-pl18x sdi4: mmc0: PL180 manf 80 rev4 at 0x80114000 irq 131,0 (pio) [ 1.747497] mmci-pl18x sdi4: DMA channels RX dma0chan24, TX dma0chan25 [ 1.785675] mmci-pl18x sdi0: Provided ocr_mask/setpower will not be used (using regulator instead) [ 1.794799] mmci-pl18x sdi0: mmc1: PL180 manf 80 rev4 at 0x80126000 irq 92,0 (pio) [ 1.802520] mmci-pl18x sdi0: DMA channels RX dma0chan26, TX dma0chan27 [ 1.846679] usbcore: registered new interface driver usbhid [ 1.852325] usbhid: USB HID core driver [ 1.857025] usbcore: registered new interface driver snd-usb-audio [ 1.864257] Netfilter messages via NETLINK v0.30. [ 1.869110] nf_conntrack version 0.5.0 (12790 buckets, 51160 max) [ 1.875488] ctnetlink v0.93: registering with nfnetlink. [ 1.881256] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.886688] TCP: cubic registered [ 1.890197] NET: Registered protocol family 10 [ 1.895446] NET: Registered protocol family 17 [ 1.900085] NET: Registered protocol family 15 [ 1.904724] Bluetooth: RFCOMM TTY layer initialized [ 1.909729] Bluetooth: RFCOMM socket layer initialized [ 1.914886] Bluetooth: RFCOMM ver 1.11 [ 1.918731] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.924072] Bluetooth: BNEP filters: protocol multicast [ 1.929351] mmc0: new high speed MMC card at address 0001 [ 1.929382] Bluetooth: BNEP socket layer initialized [ 1.929382] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.929382] Bluetooth: HIDP socket layer initialized [ 1.929412] NET: Registered protocol family 35 [ 1.955078] 9pnet: Installing 9P2000 support [ 1.955749] mmcblk0: mmc0:0001 3.53 GiB [ 1.955963] mmcblk0boot0: mmc0:0001 partition 1 2.00 MiB [ 1.956176] mmcblk0boot1: mmc0:0001 partition 2 2.00 MiB [ 1.956390] mmcblk0rpmb: mmc0:0001 partition 3 128 KiB [ 1.979492] NET: Registered protocol family 37 [ 1.984069] Key type dns_resolver registered [ 1.984100] mmcblk0: p1 p2 p3 [ 1.991577] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 1.999481] Registering SWP/SWPB emulation handler [ 2.007751] LDO-USB: disabling [ 2.010925] db8500-esram34: disabling [ 2.014648] db8500-esram12: disabling [ 2.018890] EN-3V3: Failed to request enable GPIO337: -517 [ 2.024597] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.024658] reg-fixed-voltage reg-fixed-voltage.1: Failed to register regulator: -517 [ 2.024688] platform reg-fixed-voltage.1: Driver reg-fixed-voltage requests probe deferral [ 2.024780] ab8500-charger ab8500-charger.0: falling back to legacy platform data [ 2.024963] ab8500-charger ab8500-charger.0: failed to get vddadc regulator [ 2.024993] platform ab8500-charger.0: Driver ab8500-charger requests probe deferral [ 2.025054] smsc911x: Driver version 2008-10-21 [ 2.025146] smsc911x smsc911x.0: Failed to get supply 'vdd33a': -517 [ 2.025146] smsc911x smsc911x.0 (unregistered net_device): couldn't get regulators -517 [ 2.025177] platform smsc911x.0: Driver smsc911x requests probe deferral [ 2.095001] mmcblk0boot1: unknown partition table [ 2.100128] EN-3V3: Failed to request enable GPIO337: -517 [ 2.106201] reg-fixed-voltage reg-fixed-voltage.1: Failed to register regulator: -517 [ 2.114379] platform reg-fixed-voltage.1: Driver reg-fixed-voltage requests probe deferral [ 2.122802] ab8500-charger ab8500-charger.0: falling back to legacy platform data [ 2.122833] ab8500-rtc ab8500-rtc.0: setting system clock to 2013-01-24 17:10:21 UTC (1359047421) [ 2.122955] ALSA device list: [ 2.122955] No soundcards found. [ 2.145721] mmcblk0boot0: unknown partition table [ 2.150878] ab8500-charger ab8500-charger.0: failed to get vddadc regulator [ 2.158020] platform ab8500-charger.0: Driver ab8500-charger requests probe deferral [ 2.165832] smsc911x: Driver version 2008-10-21 [ 2.170532] smsc911x smsc911x.0: Failed to get supply 'vdd33a': -517 [ 2.176910] smsc911x smsc911x.0 (unregistered net_device): couldn't get regulators -517 [ 2.184967] platform smsc911x.0: Driver smsc911x requests probe deferral [ 2.185119] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 2.186431] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244) [ 2.210479] EN-3V3: Failed to request enable GPIO337: -517 [ 2.216278] reg-fixed-voltage reg-fixed-voltage.1: Failed to register regulator: -517 [ 2.224121] platform reg-fixed-voltage.1: Driver reg-fixed-voltage requests probe deferral [ 2.604156] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended [ 2.618927] EXT4-fs (mmcblk0p3): recovery complete [ 2.631408] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.639587] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.650085] devtmpfs: mounted [ 2.653350] Freeing init memory: 312K [ 3.095977] init: ureadahead main process (692) terminated with status 5 [ 3.983581] mmci-pl18x sdi4: error during DMA transfer! [ 3.988952] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.998840] mmcblk0rpmb: retrying using single block read [ 4.412017] mmci-pl18x sdi4: error during DMA transfer! [ 4.417358] mmcblk0rpmb: error -110 transferring data, sector 8, nr 8, cmd response 0x900, card status 0xb00 [ 4.427429] mmcblk0rpmb: retrying using single block read [ 4.842041] mmci-pl18x sdi4: error during DMA transfer! [ 4.847381] mmcblk0rpmb: error -110 transferring data, sector 24, nr 8, cmd response 0x900, card status 0xb00 [ 4.857360] mmcblk0rpmb: retrying using single block read [ 5.272949] mmci-pl18x sdi4: error during DMA transfer! [ 5.278289] mmcblk0rpmb: error -110 transferring data, sector 56, nr 8, cmd response 0x900, card status 0xb00 [ 5.288269] mmcblk0rpmb: retrying using single block read [ 5.703063] mmci-pl18x sdi4: error during DMA transfer! [ 5.708404] mmcblk0rpmb: error -110 transferring data, sector 120, nr 8, cmd response 0x900, card status 0xb00 [ 5.718475] mmcblk0rpmb: retrying using single block read [ 6.132965] mmci-pl18x sdi4: error during DMA transfer! [ 6.138336] mmcblk0rpmb: error -110 transferring data, sector 64, nr 8, cmd response 0x900, card status 0xb00 [ 6.148315] mmcblk0rpmb: retrying using single block read [ 6.563507] mmci-pl18x sdi4: error during DMA transfer! [ 6.568847] mmcblk0rpmb: error -110 transferring data, sector 16, nr 8, cmd response 0x900, card status 0xb00 [ 6.579071] mmcblk0rpmb: retrying using single block read [ 6.994110] mmci-pl18x sdi4: error during DMA transfer! [ 6.999450] mmcblk0rpmb: error -110 transferring data, sector 128, nr 8, cmd response 0x900, card status 0xb00 [ 7.009521] mmcblk0rpmb: retrying using single block read [ 7.424499] mmci-pl18x sdi4: error during DMA transfer! [ 7.429870] mmcblk0rpmb: error -110 transferring data, sector 32, nr 8, cmd response 0x900, card status 0xb00 [ 7.439819] mmcblk0rpmb: retrying using single block read [ 7.472686] mmcblk0boot0: r/w command failed, status = 0x80000900 [ 7.478851] end_request: I/O error, dev mmcblk0boot0, sector 3832 [ 7.484954] Buffer I/O error on device mmcblk0boot0, logical block 479 * Starting mDNS/DNS-SD daemon.[74G[ OK ] * Starting configure network device security.[74G[ OK ] [ 11.248016] mmci-pl18x sdi4: error during DMA transfer! [ 11.253417] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 11.792541] mmci-pl18x sdi4: error during DMA transfer! [ 11.797973] mmcblk0rpmb: error -110 transferring data, sector 24, nr 8, cmd response 0x900, card status 0xb00 [ 12.237579] mmci-pl18x sdi4: error during DMA transfer! [ 12.242980] mmcblk0rpmb: error -110 transferring data, sector 8, nr 8, cmd response 0x900, card status 0xb00 * Starting Mount network filesystems.[74G[ OK ] * Starting Upstart job to start rpcbind on boot only.[74G[ OK ] * Starting Failsafe Boot Delay.[74G[ OK ] * Stopping Upstart job to start rpcbind on boot only.[74G[ OK ] * Starting Bridge socket events into upstart.[74G[ OK ] [ 12.788513] mmci-pl18x sdi4: error during DMA transfer! [ 12.793945] mmcblk0rpmb: error -110 transferring data, sector 56, nr 8, cmd response 0x900, card status 0xb00 [ 12.823486] mmcblk0boot0: r/w command failed, status = 0x80000900 [ 12.836425] end_request: I/O error, dev mmcblk0boot0, sector 3832 [ 12.842529] Buffer I/O error on device mmcblk0boot0, logical block 479 * Stopping Mount network filesystems.[74G[ OK ] * Starting RPC portmapper replacement.[74G[ OK ] * Starting Start this job to wait until rpcbind is started or fails to start.[74G[ OK ] * Stopping Start this job to wait until rpcbind is started or fails to start.[74G[ OK ] * Stopping rpcsec_gss daemon.[74G[ OK ] [ 13.397216] mmci-pl18x sdi4: error during DMA transfer! [ 13.402618] mmcblk0rpmb: error -110 transferring data, sector 120, nr 8, cmd response 0x900, card status 0xb00 [ 14.008239] mmci-pl18x sdi4: error during DMA transfer! [ 14.013610] mmcblk0rpmb: error -110 transferring data, sector 64, nr 8, cmd response 0x900, card status 0xb00 [ 14.463684] mmci-pl18x sdi4: error during DMA transfer! [ 14.469177] mmcblk0rpmb: error -110 transferring data, sector 16, nr 8, cmd response 0x900, card status 0xb00 [ 14.911254] mmci-pl18x sdi4: error during DMA transfer! [ 14.916625] mmcblk0rpmb: error -110 transferring data, sector 128, nr 8, cmd response 0x900, card status 0xb00 [ 15.366241] mmci-pl18x sdi4: error during DMA transfer! [ 15.371612] mmcblk0rpmb: error -110 transferring data, sector 32, nr 8, cmd response 0x900, card status 0xb00 [ 15.831939] mmci-pl18x sdi4: error during DMA transfer! [ 15.837341] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 * Starting NSM status monitor.[74G[ OK ] * Stopping Failsafe Boot Delay.[74G[ OK ] * Starting System V initialisation compatibility.[74G[ OK ] * Starting configure network device.[74G[ OK ] * Stopping cold plug devices.[74G[ OK ] * Stopping log initial device creation.[74G[ OK ] [ 16.339935] gadget: no file given for LUN0 [ 16.417297] g_multi musb-hdrc.0.auto: failed to start g_multi: -22 Last login: Thu Jan 24 17:09:11 UTC 2013 on tty1 speech-dispatcher disabled; edit /etc/default/speech-dispatcher Checking for running unattended-upgrades: Welcome to Linaro 12.02 (GNU/Linux 3.8.0-rc4-test+ armv7l) * Documentation: https://wiki.linaro.org/ New release '12.04.1 LTS' available. Run 'do-release-upgrade' to upgrade to it. *** /dev/mmcblk0p3 will be checked for errors at next reboot *** * Starting bluetooth .[80G root@...aro-ubuntu-desktop:~# .[74G[ OK ] .[33m*.[39;49m PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned -- Steve -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists