| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1359514939-15653-2-git-send-email-acourbot@nvidia.com>
Date: Wed, 30 Jan 2013 12:02:16 +0900
From: Alexandre Courbot <acourbot@...dia.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Thierry Reding <thierry.reding@...onic-design.de>,
Stephen Warren <swarren@...dotorg.org>,
Mark Zhang <markz@...dia.com>
CC: <linux-kernel@...r.kernel.org>, <linux-fbdev@...r.kernel.org>,
<linux-tegra@...r.kernel.org>, <gnurou@...il.com>,
Alexandre Courbot <acourbot@...dia.com>
Subject: [RFC 1/4] video: panel: add CLAA101WA01A panel support
Add support for the Chunghwa CLAA101WA01A display panel.
Signed-off-by: Alexandre Courbot <acourbot@...dia.com>
---
.../video/display/chunghwa,claa101wa01a.txt | 8 +
drivers/video/display/Kconfig | 8 +
drivers/video/display/Makefile | 1 +
drivers/video/display/panel-claa101wa01a.c | 209 +++++++++++++++++++++
4 files changed, 226 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/display/chunghwa,claa101wa01a.txt
create mode 100644 drivers/video/display/panel-claa101wa01a.c
diff --git a/Documentation/devicetree/bindings/video/display/chunghwa,claa101wa01a.txt b/Documentation/devicetree/bindings/video/display/chunghwa,claa101wa01a.txt
new file mode 100644
index 0000000..cfdc7fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/display/chunghwa,claa101wa01a.txt
@@ -0,0 +1,8 @@
+Chunghwa CLAA101WA01A Display Panel
+
+Required properties:
+- compatible: "chunghwa,claa101wa01a"
+- pnl-supply: regulator controlling power supply to the panel
+- bl-supply: regulator controlling power supply to the backlight
+- pnl-enable-gpios: GPIO that enables the panel
+- bl-enable-gpios: GPIO that enables the backlight
diff --git a/drivers/video/display/Kconfig b/drivers/video/display/Kconfig
index 9ca2e60..6902abb 100644
--- a/drivers/video/display/Kconfig
+++ b/drivers/video/display/Kconfig
@@ -32,4 +32,12 @@ config DISPLAY_PANEL_R61517
If you are in doubt, say N.
+config DISPLAY_PANEL_CLAA101WA01A
+ tristate "Chunghwa CLAA101WA01A Display Panel"
+ select BACKLIGHT_PWM
+ ---help---
+ Support for the Chunghwa CLAA101WA01A Display Panel.
+
+ If you are in doubt, say N.
+
endif # DISPLAY_CORE
diff --git a/drivers/video/display/Makefile b/drivers/video/display/Makefile
index ec557a1..19084a2 100644
--- a/drivers/video/display/Makefile
+++ b/drivers/video/display/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_DISPLAY_CORE) += display-core.o
obj-$(CONFIG_DISPLAY_PANEL_DPI) += panel-dpi.o
obj-$(CONFIG_DISPLAY_PANEL_R61505) += panel-r61505.o
obj-$(CONFIG_DISPLAY_PANEL_R61517) += panel-r61517.o
+obj-$(CONFIG_DISPLAY_PANEL_CLAA101WA01A) += panel-claa101wa01a.o
diff --git a/drivers/video/display/panel-claa101wa01a.c b/drivers/video/display/panel-claa101wa01a.c
new file mode 100644
index 0000000..93ae86b
--- /dev/null
+++ b/drivers/video/display/panel-claa101wa01a.c
@@ -0,0 +1,209 @@
+/*
+ * CLAA101WA01A Display Panel
+ *
+ * Copyright (C) 2013 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+#include <video/display.h>
+
+#define CLAA101WA01A_WIDTH 223
+#define CLAA101WA01A_HEIGHT 125
+
+struct panel_claa101 {
+ struct display_entity entity;
+ struct regulator *vdd_pnl;
+ struct regulator *vdd_bl;
+ /* Enable GPIOs */
+ int pnl_enable;
+ int bl_enable;
+};
+
+#define to_panel_claa101(p) container_of(p, struct panel_claa101, entity)
+
+static int panel_claa101_set_state(struct display_entity *entity,
+ enum display_entity_state state)
+{
+ struct panel_claa101 *panel = to_panel_claa101(entity);
+
+ /* OFF and STANDBY are equivalent to us */
+ if (state == DISPLAY_ENTITY_STATE_STANDBY)
+ state = DISPLAY_ENTITY_STATE_OFF;
+
+ switch (state) {
+ case DISPLAY_ENTITY_STATE_OFF:
+ case DISPLAY_ENTITY_STATE_STANDBY:
+ if (entity->source)
+ display_entity_set_stream(entity->source,
+ DISPLAY_ENTITY_STREAM_STOPPED);
+
+ /* TODO error checking? */
+ gpio_set_value_cansleep(panel->bl_enable, 0);
+ usleep_range(10000, 10000);
+ regulator_disable(panel->vdd_bl);
+ usleep_range(200000, 200000);
+ gpio_set_value_cansleep(panel->pnl_enable, 0);
+ regulator_disable(panel->vdd_pnl);
+ break;
+
+ case DISPLAY_ENTITY_STATE_ON:
+ regulator_enable(panel->vdd_pnl);
+ gpio_set_value_cansleep(panel->pnl_enable, 1);
+ usleep_range(200000, 200000);
+ regulator_enable(panel->vdd_bl);
+ usleep_range(10000, 10000);
+ gpio_set_value_cansleep(panel->bl_enable, 1);
+
+ if (entity->source)
+ display_entity_set_stream(entity->source,
+ DISPLAY_ENTITY_STREAM_CONTINUOUS);
+ break;
+ }
+
+ return 0;
+}
+
+static int panel_claa101_get_modes(struct display_entity *entity,
+ const struct videomode **modes)
+{
+ /* TODO get modes from EDID? */
+ return 0;
+}
+
+static int panel_claa101_get_size(struct display_entity *entity,
+ unsigned int *width, unsigned int *height)
+{
+ *width = CLAA101WA01A_WIDTH;
+ *height = CLAA101WA01A_HEIGHT;
+
+ return 0;
+}
+
+static int panel_claa101_get_params(struct display_entity *entity,
+ struct display_entity_interface_params *params)
+{
+ return 0;
+}
+
+static const struct display_entity_control_ops panel_claa101_control_ops = {
+ .set_state = panel_claa101_set_state,
+ .get_modes = panel_claa101_get_modes,
+ .get_size = panel_claa101_get_size,
+ .get_params = panel_claa101_get_params,
+};
+
+static int __init panel_claa101_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct panel_claa101 *panel;
+ int err;
+
+ panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
+ if (!panel)
+ return -ENOMEM;
+
+ panel->vdd_pnl = devm_regulator_get(dev, "pnl");
+ if (IS_ERR(panel->vdd_pnl)) {
+ dev_err(dev, "cannot get vdd regulator\n");
+ return PTR_ERR(panel->vdd_pnl);
+ }
+
+ panel->vdd_bl = devm_regulator_get(dev, "bl");
+ if (IS_ERR(panel->vdd_bl)) {
+ dev_err(dev, "cannot get bl regulator\n");
+ return PTR_ERR(panel->vdd_bl);
+ }
+
+ err = of_get_named_gpio(dev->of_node, "pnl-enable-gpios", 0);
+ if (err < 0) {
+ dev_err(dev, "cannot find panel enable GPIO!\n");
+ return err;
+ }
+ panel->pnl_enable = err;
+ err = devm_gpio_request_one(dev, panel->pnl_enable,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "panel");
+ if (err < 0) {
+ dev_err(dev, "cannot acquire panel enable GPIO!\n");
+ return err;
+ }
+
+ err = of_get_named_gpio(dev->of_node, "bl-enable-gpios", 0);
+ if (err < 0) {
+ dev_err(dev, "cannot find backlight enable GPIO!\n");
+ return err;
+ }
+ panel->bl_enable = err;
+ err = devm_gpio_request_one(dev, panel->bl_enable,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "backlight");
+ if (err < 0) {
+ dev_err(dev, "cannot acquire backlight enable GPIO!\n");
+ return err;
+ }
+
+ panel->entity.dev = dev;
+ panel->entity.ops.ctrl = &panel_claa101_control_ops;
+ err = display_entity_register(&panel->entity);
+ if (err < 0)
+ return err;
+
+ platform_set_drvdata(pdev, panel);
+
+ dev_info(dev, "%s successful\n", __func__);
+
+ return 0;
+}
+
+static int __exit panel_claa101_remove(struct platform_device *pdev)
+{
+ struct panel_claa101 *panel = platform_get_drvdata(pdev);
+
+ display_entity_unregister(&panel->entity);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id panel_claa101_of_match[] = {
+ { .compatible = "chunghwa,claa101wa01a", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, pwm_backlight_of_match);
+#else
+#endif
+
+static const struct dev_pm_ops panel_claa101_dev_pm_ops = {
+};
+
+static struct platform_driver panel_claa101_driver = {
+ .probe = panel_claa101_probe,
+ .remove = panel_claa101_remove,
+ .driver = {
+ .name = "panel_claa101wa01a",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &panel_claa101_dev_pm_ops,
+#endif
+#ifdef CONFIG_OF
+ .of_match_table = of_match_ptr(panel_claa101_of_match),
+#endif
+ },
+};
+
+module_platform_driver(panel_claa101_driver);
+
+MODULE_AUTHOR("Alexandre Courbot <acourbot@...dia.com>");
+MODULE_DESCRIPTION("Chunghwa CLAA101WA01A Display Panel");
+MODULE_LICENSE("GPL");
--
1.8.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists