| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 1 Feb 2013 13:22:48 -0500
From: Matt Porter <mporter@...com>
To: Tony Lindgren <tony@...mide.com>, Sekhar Nori <nsekhar@...com>,
Grant Likely <grant.likely@...retlab.ca>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Benoit Cousson <b-cousson@...com>,
Russell King <linux@....linux.org.uk>,
Vinod Koul <vinod.koul@...el.com>,
Rob Landley <rob@...dley.net>, Chris Ball <cjb@...top.org>
Cc: Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Linux DaVinci Kernel List
<davinci-linux-open-source@...ux.davincidsp.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Documentation List <linux-doc@...r.kernel.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Linux SPI Devel List
<spi-devel-general@...ts.sourceforge.net>,
Arnd Bergmann <arnd@...db.de>, Dan Williams <djbw@...com>,
Rob Herring <rob.herring@...xeda.com>
Subject: [PATCH v7 03/10] ARM: edma: add AM33XX support to the private EDMA API
Adds support for parsing the TI EDMA DT data into the
required EDMA private API platform data. Enables runtime
PM support to initialize the EDMA hwmod. Adds AM33XX EDMA
crossbar event mux support. Enables build on OMAP.
Signed-off-by: Matt Porter <mporter@...com>
Acked-by: Sekhar Nori <nsekhar@...com>
---
arch/arm/common/edma.c | 96 ++++++++++++++++++++++++++++++++----
arch/arm/plat-omap/Kconfig | 1 +
include/linux/platform_data/edma.h | 1 +
3 files changed, 89 insertions(+), 9 deletions(-)
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 3440d16..bd2416a 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -24,6 +24,13 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/edma.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/of_irq.h>
+#include <linux/pm_runtime.h>
#include <linux/platform_data/edma.h>
@@ -723,6 +730,9 @@ EXPORT_SYMBOL(edma_free_channel);
*/
int edma_alloc_slot(unsigned ctlr, int slot)
{
+ if (!edma_cc[ctlr])
+ return -EINVAL;
+
if (slot >= 0)
slot = EDMA_CHAN_SLOT(slot);
@@ -1575,27 +1585,69 @@ static struct of_dma_filter_info edma_filter_info = {
static int edma_probe(struct platform_device *pdev)
{
struct edma_soc_info **info = pdev->dev.platform_data;
+ struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL, NULL};
+ struct edma_soc_info tmpinfo;
const s8 (*queue_priority_mapping)[2];
const s8 (*queue_tc_mapping)[2];
int i, j, off, ln, found = 0;
int status = -1;
const s16 (*rsv_chans)[2];
const s16 (*rsv_slots)[2];
+ const s16 (*xbar_chans)[2];
int irq[EDMA_MAX_CC] = {0, 0};
int err_irq[EDMA_MAX_CC] = {0, 0};
- struct resource *r[EDMA_MAX_CC] = {NULL};
+ struct resource *r[EDMA_MAX_CC] = {NULL, NULL};
+ struct resource res[EDMA_MAX_CC];
resource_size_t len[EDMA_MAX_CC];
char res_name[10];
char irq_name[10];
+ struct device_node *node = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ if (node) {
+ /* Check if this is a second instance registered */
+ if (arch_num_cc) {
+ dev_err(dev, "only one EDMA instance is supported via DT\n");
+ return -ENODEV;
+ }
+ info = ninfo;
+ edma_of_parse_dt(dev, node, &tmpinfo);
+ info[0] = &tmpinfo;
+
+ dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
+ of_dma_controller_register(dev->of_node,
+ of_dma_simple_xlate,
+ &edma_filter_info);
+ }
if (!info)
return -ENODEV;
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "pm_runtime_get_sync() failed\n");
+ return ret;
+ }
+
for (j = 0; j < EDMA_MAX_CC; j++) {
- sprintf(res_name, "edma_cc%d", j);
- r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ if (!info[j]) {
+ if (!found)
+ return -ENODEV;
+ break;
+ }
+ if (node) {
+ ret = of_address_to_resource(node, j, &res[j]);
+ if (!IS_ERR_VALUE(ret))
+ r[j] = &res[j];
+ } else {
+ sprintf(res_name, "edma_cc%d", j);
+ r[j] = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM,
res_name);
- if (!r[j] || !info[j]) {
+ }
+ if (!r[j]) {
if (found)
break;
else
@@ -1670,8 +1722,22 @@ static int edma_probe(struct platform_device *pdev)
}
}
- sprintf(irq_name, "edma%d", j);
- irq[j] = platform_get_irq_byname(pdev, irq_name);
+ /* Clear the xbar mapped channels in unused list */
+ xbar_chans = info[j]->xbar_chans;
+ if (xbar_chans) {
+ for (i = 0; xbar_chans[i][1] != -1; i++) {
+ off = xbar_chans[i][1];
+ clear_bits(off, 1,
+ edma_cc[j]->edma_unused);
+ }
+ }
+
+ if (node)
+ irq[j] = irq_of_parse_and_map(node, 0);
+ else {
+ sprintf(irq_name, "edma%d", j);
+ irq[j] = platform_get_irq_byname(pdev, irq_name);
+ }
edma_cc[j]->irq_res_start = irq[j];
status = request_irq(irq[j], dma_irq_handler, 0, "edma",
&pdev->dev);
@@ -1681,8 +1747,12 @@ static int edma_probe(struct platform_device *pdev)
goto fail;
}
- sprintf(irq_name, "edma%d_err", j);
- err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+ if (node)
+ err_irq[j] = irq_of_parse_and_map(node, 2);
+ else {
+ sprintf(irq_name, "edma%d_err", j);
+ err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+ }
edma_cc[j]->irq_res_end = err_irq[j];
status = request_irq(err_irq[j], dma_ccerr_handler, 0,
"edma_error", &pdev->dev);
@@ -1743,9 +1813,17 @@ fail1:
return status;
}
+static const struct of_device_id edma_of_ids[] = {
+ { .compatible = "ti,edma3", },
+ {}
+};
static struct platform_driver edma_driver = {
- .driver.name = "edma",
+ .driver = {
+ .name = "edma",
+ .of_match_table = edma_of_ids,
+ },
+ .probe = edma_probe,
};
static int __init edma_init(void)
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 665870d..0b81d6c 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -29,6 +29,7 @@ config ARCH_OMAP2PLUS
select PINCTRL
select PROC_DEVICETREE if PROC_FS
select SPARSE_IRQ
+ select TI_PRIV_EDMA
select USE_OF
help
"Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index 2344ea2..ffc1fb2 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -177,6 +177,7 @@ struct edma_soc_info {
const s8 (*queue_tc_mapping)[2];
const s8 (*queue_priority_mapping)[2];
+ const s16 (*xbar_chans)[2];
};
#endif
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists