lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1359978868-28736-10-git-send-email-lee.jones@linaro.org>
Date:	Mon,  4 Feb 2013 11:53:24 +0000
From:	Lee Jones <lee.jones@...aro.org>
To:	linux-kernel@...r.kernel.org, broonie@...nsource.wolfsonmicro.com
Cc:	Bengt Jonsson <bengt.g.jonsson@...ricsson.com>,
	Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 09/73] ARM: ux500: regulators: Add mask for configuration

From: Bengt Jonsson <bengt.g.jonsson@...ricsson.com>

There is already before a register mask in the regulator driver
to allow some bits of a register to be initialized. The register
value is defined in the board configuration. This patch puts a
mask in the board configuration to specify which bits should
actually be altered. The purpose with this patch is to avoid
future mistakes when updating the allowed bits in the regulator
driver.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@...ricsson.com>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@...ricsson.com>
Tested-by: Jonas ABERG <jonas.aberg@...ricsson.com>
---
 arch/arm/mach-ux500/board-mop500-regulators.c |   72 ++++++++++++-------------
 drivers/regulator/ab8500.c                    |   36 +++++--------
 include/linux/regulator/ab8500.h              |   10 ++--
 3 files changed, 56 insertions(+), 62 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 556eba5..ac512bc 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -129,19 +129,19 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * VpllRequestCtrl          = HP/LP depending on VxRequest
 	 * VextSupply1RequestCtrl   = HP/LP depending on VxRequest
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2,       0xfc, 0x00),
 	/*
 	 * VextSupply2RequestCtrl   = HP/LP depending on VxRequest
 	 * VextSupply3RequestCtrl   = HP/LP depending on VxRequest
 	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
 	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3,       0xff, 0x00),
 	/*
 	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
 	 * SwHPReq                  = Control through SWValid disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4,       0x07, 0x00),
 	/*
 	 * Vsmps1SysClkReq1HPValid  = enabled
 	 * Vsmps2SysClkReq1HPValid  = enabled
@@ -152,44 +152,44 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * Vaux2SysClkReq1HPValid   = disabled
 	 * Vaux3SysClkReq1HPValid   = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x17),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xff, 0x17),
 	/*
 	 * VextSupply1SysClkReq1HPValid = disabled
 	 * VextSupply2SysClkReq1HPValid = disabled
 	 * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
 	/*
 	 * VanaHwHPReq1Valid        = disabled
 	 * Vaux1HwHPreq1Valid       = disabled
 	 * Vaux2HwHPReq1Valid       = disabled
 	 * Vaux3HwHPReqValid        = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1,     0xe8, 0x00),
 	/*
 	 * VextSupply1HwHPReq1Valid = disabled
 	 * VextSupply2HwHPReq1Valid = disabled
 	 * VextSupply3HwHPReq1Valid = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2,     0x07, 0x00),
 	/*
 	 * VanaHwHPReq2Valid        = disabled
 	 * Vaux1HwHPReq2Valid       = disabled
 	 * Vaux2HwHPReq2Valid       = disabled
 	 * Vaux3HwHPReq2Valid       = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1,     0xe8, 0x00),
 	/*
 	 * VextSupply1HwHPReq2Valid = disabled
 	 * VextSupply2HwHPReq2Valid = disabled
 	 * VextSupply3HwHPReq2Valid = HWReq2 controlled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2,     0x07, 0x04),
 	/*
 	 * VanaSwHPReqValid         = disabled
 	 * Vaux1SwHPReqValid        = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1,      0xa0, 0x00),
 	/*
 	 * Vaux2SwHPReqValid        = disabled
 	 * Vaux3SwHPReqValid        = disabled
@@ -197,7 +197,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * VextSupply2SwHPReqValid  = disabled
 	 * VextSupply3SwHPReqValid  = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2,      0x1f, 0x00),
 	/*
 	 * SysClkReq2Valid1         = SysClkReq2 controlled
 	 * SysClkReq3Valid1         = disabled
@@ -207,7 +207,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * SysClkReq7Valid1         = disabled
 	 * SysClkReq8Valid1         = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1,    0xfe, 0x2a),
 	/*
 	 * SysClkReq2Valid2         = disabled
 	 * SysClkReq3Valid2         = disabled
@@ -217,7 +217,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * SysClkReq7Valid2         = disabled
 	 * SysClkReq8Valid2         = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2,    0xfe, 0x20),
 	/*
 	 * VTVoutEna                = disabled
 	 * Vintcore12Ena            = disabled
@@ -225,73 +225,73 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * Vintcore12LP             = inactive (HP)
 	 * VTVoutLP                 = inactive (HP)
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10),
+	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1,              0xfe, 0x10),
 	/*
 	 * VaudioEna                = disabled
 	 * VdmicEna                 = disabled
 	 * Vamic1Ena                = disabled
 	 * Vamic2Ena                = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY,           0x1e, 0x00),
 	/*
 	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
 	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC,         0x03, 0x00),
 	/*
 	 * VBBN                     = force OFF
 	 * VBBP                     = force OFF
 	 * NOTE! PRCMU register
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_ARMREGU2,               0x00),
+	INIT_REGULATOR_REGISTER(AB8500_ARMREGU2,               0x0f, 0x00),
 	/*
 	 * VBBNSel1                 = VBBP = VBBPFB
 	 * VBBPSel1                 = 0 V
 	 * NOTE! PRCMU register
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VBBSEL1,                0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VBBSEL1,                0x0f, 0x00),
 	/*
 	 * VBBNSel2                 = VBBP = VBBPFB
 	 * VBBPSel2                 = 0 V
 	 * NOTE! PRCMU register
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VBBSEL2,                0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VBBSEL2,                0x0f, 0x00),
 	/*
 	 * Vsmps1Regu               = HW control
 	 * Vsmps1SelCtrl            = Vsmps1 voltage defined by Vsmsp1Sel2
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS1REGU,             0x06),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS1REGU,             0x0f, 0x06),
 	/*
 	 * Vsmps2Regu               = HW control
 	 * Vsmps2SelCtrl            = Vsmps2 voltage defined by Vsmsp2Sel2
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU,             0x06),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU,             0x0f, 0x06),
 	/*
 	 * Vsmps3Sel2               = 1.2125 V
 	 * NOTE! PRCMU register
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL2,             0x29),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL2,             0x7f, 0x29),
 	/*
 	 * Vsmps3Regu               = HW control
 	 * Vsmps3SelCtrl            = Vsmps3 voltage defined by Vsmps3Sel2
 	 * NOTE! PRCMU register
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS3REGU,             0x06),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS3REGU,             0x0f, 0x06),
 	/*
 	 * Vsmps3Sel1               = 0.9 V
 	 * NOTE! PRCMU register
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL1,             0x10),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL1,             0x7f, 0x10),
 	/*
 	 * VPll                     = Hw controlled
 	 * VanaRegu                 = force off
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02),
+	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU,           0x0f, 0x02),
 	/*
 	 * VrefDDREna               = disabled
 	 * VrefDDRSleepMode         = inactive (no pulldown)
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VREFDDR,                0x03, 0x00),
 	/*
 	 * VextSupply1Regu          = HW control
 	 * VextSupply2Regu          = HW control
@@ -299,37 +299,37 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
 	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a),
+	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU,          0xff, 0x1a),
 	/*
 	 * Vaux1Regu                = force HP
 	 * Vaux2Regu                = force off
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01),
+	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU,             0x0f, 0x01),
 	/*
 	 * Vrf1Regu                 = HW control
 	 * Vaux3Regu                = force off
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x08),
+	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU,          0x0f, 0x08),
 	/*
 	 * Vsmps1                   = 1.15V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1,             0x3f, 0x24),
 	/*
 	 * Vaux1Sel                 = 2.5 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08),
+	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL,               0x0f, 0x08),
 	/*
 	 * Vaux2Sel                 = 2.9 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d),
+	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL,               0x0f, 0x0d),
 	/*
 	 * Vaux3Sel                 = 2.91 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07),
+	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL,           0x07, 0x07),
 	/*
 	 * VextSupply12LP           = disabled (no LP)
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE,         0x01, 0x00),
 	/*
 	 * Vaux1Disch               = short discharge time
 	 * Vaux2Disch               = short discharge time
@@ -338,13 +338,13 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * VTVoutDisch              = short discharge time
 	 * VaudioDisch              = short discharge time
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH,          0xfc, 0x00),
 	/*
 	 * VanaDisch                = short discharge time
 	 * VdmicPullDownEna         = pulldown disabled when Vdmic is disabled
 	 * VdmicDisch               = short discharge time
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2,         0x16, 0x00),
 };
 
 /* AB8500 regulators */
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index d0ce436..7b7dd20 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -826,23 +826,20 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
 	REG_INIT(AB8500_REGUCTRLDISCH2,		0x04, 0x44, 0x16),
 };
 
-static int
-ab8500_regulator_init_registers(struct platform_device *pdev, int id, int value)
+static int ab8500_regulator_init_registers(struct platform_device *pdev,
+					   int id, int mask, int value)
 {
 	int err;
 
-	if (value & ~ab8500_reg_init[id].mask) {
-		dev_err(&pdev->dev,
-			"Configuration error: value outside mask.\n");
-		return -EINVAL;
-	}
+	BUG_ON(value & ~mask);
+	BUG_ON(mask & ~ab8500_reg_init[id].mask);
 
+	/* initialize register */
 	err = abx500_mask_and_set_register_interruptible(
 		&pdev->dev,
 		ab8500_reg_init[id].bank,
 		ab8500_reg_init[id].addr,
-		ab8500_reg_init[id].mask,
-		value);
+		mask, value);
 	if (err < 0) {
 		dev_err(&pdev->dev,
 			"Failed to initialize 0x%02x, 0x%02x.\n",
@@ -850,13 +847,11 @@ ab8500_regulator_init_registers(struct platform_device *pdev, int id, int value)
 			ab8500_reg_init[id].addr);
 		return err;
 	}
-
 	dev_vdbg(&pdev->dev,
-		"init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
-		ab8500_reg_init[id].bank,
-		ab8500_reg_init[id].addr,
-		ab8500_reg_init[id].mask,
-		value);
+		 "  init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+		 ab8500_reg_init[id].bank,
+		 ab8500_reg_init[id].addr,
+		 mask, value);
 
 	return 0;
 }
@@ -975,19 +970,16 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 
 	/* initialize registers */
 	for (i = 0; i < pdata->num_regulator_reg_init; i++) {
-		int id, value;
+		int id, mask, value;
 
 		id = pdata->regulator_reg_init[i].id;
+		mask = pdata->regulator_reg_init[i].mask;
 		value = pdata->regulator_reg_init[i].value;
 
 		/* check for configuration errors */
-		if (id >= AB8500_NUM_REGULATOR_REGISTERS) {
-			dev_err(&pdev->dev,
-				"Configuration error: id outside range.\n");
-			return -EINVAL;
-		}
+		BUG_ON(id >= AB8500_NUM_REGULATOR_REGISTERS);
 
-		err = ab8500_regulator_init_registers(pdev, id, value);
+		err = ab8500_regulator_init_registers(pdev, id, mask, value);
 		if (err < 0)
 			return err;
 	}
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 2c6c962..a1d245f 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -48,13 +48,15 @@ enum ab9540_regulator_id {
 /* AB8500 and AB9540 register initialization */
 struct ab8500_regulator_reg_init {
 	int id;
+	u8 mask;
 	u8 value;
 };
 
-#define INIT_REGULATOR_REGISTER(_id, _value)	\
-	{					\
-		.id = _id,			\
-		.value = _value,		\
+#define INIT_REGULATOR_REGISTER(_id, _mask, _value)	\
+	{						\
+		.id = _id,				\
+		.mask = _mask,				\
+		.value = _value,			\
 	}
 
 /* AB8500 registers */
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ