linux-kernel - [PATCH 30/73] regulator: ab8500: Remove Vsafe voltage settings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1359978868-28736-31-git-send-email-lee.jones@linaro.org>
Date:	Mon,  4 Feb 2013 11:53:45 +0000
From:	Lee Jones <lee.jones@...aro.org>
To:	linux-kernel@...r.kernel.org, broonie@...nsource.wolfsonmicro.com
Cc:	Bengt Jonsson <bengt.g.jonsson@...ricsson.com>,
	Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 30/73] regulator: ab8500: Remove Vsafe voltage settings

From: Bengt Jonsson <bengt.g.jonsson@...ricsson.com>

The Vsafe regulator should not be handled by the kernel, it
should be setup before the kernel starts. This patch removes
the voltage settings.

Current consumption will increase slightly (rough estimate 25
uA) when the platform is in the low power state because SoC
sets a voltage of 0.95 V where the kernel set a voltage of
0.925 V.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@...ricsson.com>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
 arch/arm/mach-ux500/board-mop500-regulators.c |   10 ----------
 drivers/regulator/ab8500.c                    |   10 ----------
 include/linux/regulator/ab8500.h              |    2 --
 3 files changed, 22 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 8473ee1..f9f3fc3 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -265,22 +265,12 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU,             0x0f, 0x06),
 	/*
-	 * Vsmps3Sel2               = 1.2125 V
-	 * NOTE! PRCMU register
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL2,             0x7f, 0x29),
-	/*
 	 * Vsmps3Regu               = HW control
 	 * Vsmps3SelCtrl            = Vsmps3 voltage defined by Vsmps3Sel2
 	 * NOTE! PRCMU register
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VSMPS3REGU,             0x0f, 0x06),
 	/*
-	 * Vsmps3Sel1               = 0.9 V
-	 * NOTE! PRCMU register
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL1,             0x7f, 0x10),
-	/*
 	 * VPll                     = Hw controlled
 	 * VanaRegu                 = force off
 	 */
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 406c561..3f5db96 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -802,16 +802,6 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
 	 */
 	REG_INIT(AB8500_VSMPS2SEL3,		0x04, 0x19, 0x3f),
 	/*
-	 * 0x7f, Vsmps3Sel1
-	 * NOTE! PRCMU register
-	 */
-	REG_INIT(AB8500_VSMPS3SEL1,             0x04, 0x1b, 0x7f),
-	/*
-	 * 0x7f, Vsmps3Sel2
-	 * NOTE! PRCMU register
-	 */
-	REG_INIT(AB8500_VSMPS3SEL2,             0x04, 0x1c, 0x7f),
-	/*
 	 * 0x0f, Vaux1Sel
 	 */
 	REG_INIT(AB8500_VAUX1SEL,		0x04, 0x1f, 0x0f),
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 094d24c..74955db 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -93,8 +93,6 @@ enum ab8500_regulator_reg {
 	AB8500_VSMPS2SEL1,
 	AB8500_VSMPS2SEL2,
 	AB8500_VSMPS2SEL3,
-	AB8500_VSMPS3SEL1, /* NOTE! PRCMU register */
-	AB8500_VSMPS3SEL2, /* NOTE! PRCMU register */
 	AB8500_VAUX1SEL,
 	AB8500_VAUX2SEL,
 	AB8500_VRF1VAUX3SEL,
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/