| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1359978868-28736-8-git-send-email-lee.jones@linaro.org>
Date: Mon, 4 Feb 2013 11:53:22 +0000
From: Lee Jones <lee.jones@...aro.org>
To: linux-kernel@...r.kernel.org, broonie@...nsource.wolfsonmicro.com
Cc: Bengt Jonsson <bengt.g.jonsson@...ricsson.com>,
Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 07/73] regulator: ab8500: Fix for regulator_set_mode functionality
From: Bengt Jonsson <bengt.g.jonsson@...ricsson.com>
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@...ricsson.com>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
Reviewed-by: Mattias WALLIN <mattias.wallin@...ricsson.com>
Reviewed-by: Emeric VIGIER <emeric.vigier@...ricsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@...ricsson.com>
---
drivers/regulator/ab8500.c | 78 ++++++++++++++++++++++++--------------------
1 file changed, 42 insertions(+), 36 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 1854ec3..791e821 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -30,12 +30,13 @@
* @dev: device pointer
* @desc: regulator description
* @regulator_dev: regulator device
+ * @is_enabled: status of regulator (on/off)
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
- * @update_mask: mask to enable/disable regulator
+ * @update_mask: mask to enable/disable and set mode of regulator
* @update_val: bits holding the regulator current mode
* @update_val_idle: bits to enable the regulator in idle (low power) mode
- * @update_val_enable: bits to enable the regulator in normal (high power) mode
+ * @update_val_normal: bits to enable the regulator in normal (high power) mode
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
@@ -46,12 +47,13 @@ struct ab8500_regulator_info {
struct device *dev;
struct regulator_desc desc;
struct regulator_dev *regulator;
+ bool is_enabled;
u8 update_bank;
u8 update_reg;
u8 update_mask;
u8 update_val;
u8 update_val_idle;
- u8 update_val_enable;
+ u8 update_val_normal;
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
@@ -112,15 +114,17 @@ static int ab8500_regulator_enable(struct regulator_dev *rdev)
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
- info->update_mask, info->update_val_enable);
+ info->update_mask, info->update_val);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"couldn't set enable bits for regulator\n");
+ info->is_enabled = true;
+
dev_vdbg(rdev_get_dev(rdev),
"%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
- info->update_mask, info->update_val_enable);
+ info->update_mask, info->update_val);
return ret;
}
@@ -142,6 +146,8 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev)
dev_err(rdev_get_dev(rdev),
"couldn't set disable bits for regulator\n");
+ info->is_enabled = false;
+
dev_vdbg(rdev_get_dev(rdev),
"%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
@@ -150,8 +156,11 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev)
return ret;
}
-static int ab8500_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode)
+static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
{
+ int ret = 0;
+
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
@@ -159,13 +168,9 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev, unsigned int mo
return -EINVAL;
}
- /*
- * update_val_enable is protected by mutex
- * into regulator/core.c layout
- */
switch (mode) {
case REGULATOR_MODE_NORMAL:
- info->update_val = info->update_val_enable;
+ info->update_val = info->update_val_normal;
break;
case REGULATOR_MODE_IDLE:
info->update_val = info->update_val_idle;
@@ -174,32 +179,31 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev, unsigned int mo
return -EINVAL;
}
- return ab8500_regulator_enable(rdev);
+ if (info->is_enabled) {
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->update_bank, info->update_reg,
+ info->update_mask, info->update_val);
+ if (ret < 0)
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set regulator mode\n");
+ }
+
+ return ret;
}
static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
- u8 regval;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
- ret = abx500_get_register_interruptible(info->dev,
- info->update_bank, info->update_reg, ®val);
- if (ret < 0) {
- dev_err(rdev_get_dev(rdev),
- "couldn't read 0x%x register\n", info->update_reg);
- return ret;
- }
-
- regval &=info->update_mask;
- if (regval == info->update_val_enable)
+ if (info->update_val == info->update_val_normal)
ret = REGULATOR_MODE_NORMAL;
- else if (regval == info->update_val_idle)
+ else if (info->update_val == info->update_val_idle)
ret = REGULATOR_MODE_IDLE;
else
ret = -EINVAL;
@@ -233,9 +237,11 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
info->update_mask, regval);
if (regval & info->update_mask)
- return true;
+ info->is_enabled = true;
else
- return false;
+ info->is_enabled = false;
+
+ return info->is_enabled;
}
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
@@ -349,7 +355,7 @@ static struct ab8500_regulator_info
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
- .update_val_enable = 0x01,
+ .update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
@@ -369,7 +375,7 @@ static struct ab8500_regulator_info
.update_mask = 0x0c,
.update_val = 0x04,
.update_val_idle = 0x0c,
- .update_val_enable = 0x04,
+ .update_val_normal = 0x04,
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
@@ -389,7 +395,7 @@ static struct ab8500_regulator_info
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
- .update_val_enable = 0x01,
+ .update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
@@ -409,7 +415,7 @@ static struct ab8500_regulator_info
.update_mask = 0x44,
.update_val = 0x04,
.update_val_idle = 0x44,
- .update_val_enable = 0x04,
+ .update_val_normal = 0x04,
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
@@ -436,7 +442,7 @@ static struct ab8500_regulator_info
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
- .update_val_enable = 0x02,
+ .update_val = 0x02,
},
[AB8500_LDO_USB] = {
.desc = {
@@ -466,7 +472,7 @@ static struct ab8500_regulator_info
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
- .update_val_enable = 0x02,
+ .update_val = 0x02,
},
[AB8500_LDO_ANAMIC1] = {
.desc = {
@@ -481,7 +487,7 @@ static struct ab8500_regulator_info
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
- .update_val_enable = 0x08,
+ .update_val = 0x08,
},
[AB8500_LDO_ANAMIC2] = {
.desc = {
@@ -496,7 +502,7 @@ static struct ab8500_regulator_info
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
- .update_val_enable = 0x10,
+ .update_val = 0x10,
},
[AB8500_LDO_DMIC] = {
.desc = {
@@ -511,7 +517,7 @@ static struct ab8500_regulator_info
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
- .update_val_enable = 0x04,
+ .update_val = 0x04,
},
[AB8500_LDO_ANA] = {
.desc = {
@@ -526,7 +532,7 @@ static struct ab8500_regulator_info
.update_bank = 0x04,
.update_reg = 0x06,
.update_mask = 0x0c,
- .update_val_enable = 0x04,
+ .update_val = 0x04,
},
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists