| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 4 Feb 2013 11:54:00 +0000
From: Lee Jones <lee.jones@...aro.org>
To: linux-kernel@...r.kernel.org, broonie@...nsource.wolfsonmicro.com
Cc: Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 45/73] regulator: ab8500: Update voltage handling for fixed voltage regulators
There are a few over-lapping methods for voltage selection operating
in the AB8500 regulator driver currently. This patch removes unused,
unnecessary variables from the regulator_info structures and provides
voltage tables for those regulators which have fixed voltages.
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
drivers/regulator/ab8500.c | 89 ++++++++++++++++++++------------------------
1 file changed, 41 insertions(+), 48 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index c204380..ae2d755 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -143,6 +143,26 @@ static const int ldo_sdio_voltages[] = {
3050000,
};
+static const int fixed_1200000_voltage[] = {
+ 1200000,
+};
+
+static const int fixed_1800000_voltage[] = {
+ 1800000,
+};
+
+static const int fixed_2000000_voltage[] = {
+ 2000000,
+};
+
+static const int fixed_2050000_voltage[] = {
+ 2050000,
+};
+
+static const int fixed_3300000_voltage[] = {
+ 3300000,
+};
+
static int ab8500_regulator_enable(struct regulator_dev *rdev)
{
int ret;
@@ -401,7 +421,6 @@ static struct regulator_ops ab8500_regulator_mode_ops = {
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
.set_mode = ab8500_regulator_set_mode,
.get_mode = ab8500_regulator_get_mode,
- .get_voltage_sel = ab8500_regulator_get_voltage_sel,
.list_voltage = regulator_list_voltage_table,
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
@@ -410,7 +429,6 @@ static struct regulator_ops ab8500_regulator_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
- .get_voltage_sel = ab8500_regulator_get_voltage_sel,
.list_voltage = regulator_list_voltage_table,
};
@@ -522,7 +540,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
- .min_uV = 2000000,
+ .volt_table = fixed_2000000_voltage,
.enable_time = 500,
},
.delay = 500,
@@ -542,7 +560,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
- .min_uV = 2000000,
+ .volt_table = fixed_2000000_voltage,
},
.update_bank = 0x03,
.update_reg = 0x83,
@@ -557,7 +575,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
- .min_uV = 2050000,
+ .volt_table = fixed_2050000_voltage,
},
.update_bank = 0x03,
.update_reg = 0x83,
@@ -572,7 +590,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
- .min_uV = 2050000,
+ .volt_table = fixed_2050000_voltage,
},
.update_bank = 0x03,
.update_reg = 0x83,
@@ -587,7 +605,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
- .min_uV = 1800000,
+ .volt_table = fixed_1800000_voltage,
},
.update_bank = 0x03,
.update_reg = 0x83,
@@ -606,7 +624,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
- .min_uV = 1200000,
+ .volt_table = fixed_1200000_voltage,
},
.load_lp_uA = 1000,
.update_bank = 0x04,
@@ -636,8 +654,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
@@ -660,8 +676,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
@@ -684,8 +698,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x0a,
@@ -708,8 +720,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
/* values for Vaux4Regu register */
.update_bank = 0x04,
@@ -734,8 +744,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
},
- .min_uV = 1050000,
- .max_uV = 2790000,
.load_lp_uA = 2000,
/* values for CtrlVaux5 register */
.update_bank = 0x01,
@@ -759,8 +767,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
},
- .min_uV = 1050000,
- .max_uV = 2790000,
.load_lp_uA = 2000,
/* values for CtrlVaux6 register */
.update_bank = 0x01,
@@ -784,8 +790,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -813,9 +817,9 @@ static struct ab8500_regulator_info
.id = AB8505_LDO_ADC,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_2000000_voltage,
},
.delay = 10000,
- .fixed_uV = 2000000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -832,8 +836,8 @@ static struct ab8500_regulator_info
.id = AB9540_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_3300000_voltage,
},
- .fixed_uV = 3300000,
.update_bank = 0x03,
.update_reg = 0x82,
.update_mask = 0x03,
@@ -849,8 +853,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_2000000_voltage,
},
- .fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
@@ -864,8 +868,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_2050000_voltage,
},
- .fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
@@ -879,8 +883,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_2050000_voltage,
},
- .fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
@@ -894,8 +898,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_1800000_voltage,
},
- .fixed_uV = 1800000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
@@ -912,8 +916,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_1200000_voltage,
},
- .fixed_uV = 1200000,
.load_lp_uA = 1000,
.update_bank = 0x04,
.update_reg = 0x06,
@@ -942,8 +946,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
@@ -966,8 +968,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
@@ -990,8 +990,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x0a,
@@ -1014,8 +1012,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
/* values for Vaux4Regu register */
.update_bank = 0x04,
@@ -1040,8 +1036,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
},
- .min_uV = 1100000,
- .max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -1069,9 +1063,9 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_2000000_voltage,
},
.delay = 10000,
- .fixed_uV = 2000000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -1088,8 +1082,8 @@ static struct ab8500_regulator_info
.id = AB9540_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_3300000_voltage,
},
- .fixed_uV = 3300000,
.update_bank = 0x03,
.update_reg = 0x82,
.update_mask = 0x03,
@@ -1105,8 +1099,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_2000000_voltage,
},
- .fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
@@ -1120,8 +1114,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_2050000_voltage,
},
- .fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
@@ -1135,8 +1129,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_2050000_voltage,
},
- .fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
@@ -1150,8 +1144,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_1800000_voltage,
},
- .fixed_uV = 1800000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
@@ -1169,8 +1163,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .volt_table = fixed_1200000_voltage,
},
- .fixed_uV = 1200000,
.load_lp_uA = 1000,
.update_bank = 0x04,
.update_reg = 0x06,
@@ -1198,6 +1192,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ .volt_table = ldo_vauxn_voltages,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
@@ -1429,8 +1424,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_sdio_voltages),
},
- .min_uV = 1050000,
- .max_uV = 3050000,
.load_lp_uA = 5000,
.update_bank = 0x03,
.update_reg = 0x88,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists