[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1360060383-16880-3-git-send-email-andreas@gaisler.com>
Date: Tue, 5 Feb 2013 11:33:03 +0100
From: Andreas Larsson <andreas@...sler.com>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <rob.herring@...xeda.com>,
linux-kernel@...r.kernel.org, devicetree-discuss@...ts.ozlabs.org,
software@...sler.com
Subject: [PATCH 2/2] gpio: Add device driver for GRGPIO cores
This driver supports GRGPIO gpio cores available in the GRLIB VHDL IP core
library.
Signed-off-by: Andreas Larsson <andreas@...sler.com>
---
v2 of the eariler single GRGPIO patch
drivers/gpio/Kconfig | 8 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-grgpio.c | 244 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 253 insertions(+), 0 deletions(-)
create mode 100644 drivers/gpio/gpio-grgpio.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 682de75..8437ab7 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -298,6 +298,14 @@ config GPIO_GE_FPGA
and write pin state) for GPIO implemented in a number of GE single
board computers.
+config GPIO_GRGPIO
+ tristate "Aeroflex Gaisler GRGPIO support"
+ depends on OF
+ select GPIO_GENERIC
+ help
+ Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
+ VHDL IP core library.
+
comment "I2C GPIO expanders:"
config GPIO_ARIZONA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c5aebd0..ca5d7a3 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
+obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c
new file mode 100644
index 0000000..87eca73
--- /dev/null
+++ b/drivers/gpio/gpio-grgpio.c
@@ -0,0 +1,244 @@
+/*
+ * Driver for Aeroflex Gaisler GRGPIO General Purpose I/O cores.
+ *
+ * 2013 (c) Aeroflex Gaisler AB
+ *
+ * This driver supports the GRGPIO GPIO core available in the GRLIB VHDL IP core
+ * library.
+ *
+ * Full documentation of the GRGPIO core can be found here:
+ * http://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Contributors: Andreas Larsson <andreas@...sler.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/basic_mmio_gpio.h>
+
+#define DRV_NAME "grgpio"
+
+#define GRGPIO_MAX_NGPIO 32
+
+struct grgpio_regs {
+ u32 data; /* 0x00 */
+ u32 output; /* 0x04 */
+ u32 dir; /* 0x08 */
+ u32 imask; /* 0x0c */
+ u32 ipol; /* 0x10 */
+ u32 iedge; /* 0x14 */
+ u32 bypass; /* 0x18 */
+ u32 __reserved; /* 0x1c */
+ u32 imap[8]; /* 0x20-0x3c */
+};
+
+struct grgpio_priv {
+ struct bgpio_chip bgc;
+ struct grgpio_regs __iomem *regs;
+
+ u32 imask; /* irq mask shadow register */
+ s32 *irqmap; /* maps offset to irq or -1 if no irq */
+};
+
+static inline struct grgpio_priv *grgpio_gc_to_priv(struct gpio_chip *gc)
+{
+ struct bgpio_chip *bgc = to_bgpio_chip(gc);
+ return container_of(bgc, struct grgpio_priv, bgc);
+}
+
+static void grgpio_set_imask(struct grgpio_priv *priv, unsigned int offset,
+ int val)
+{
+ struct bgpio_chip *bgc = &priv->bgc;
+ unsigned long mask = bgc->pin2mask(bgc, offset);
+ unsigned long flags;
+
+ spin_lock_irqsave(&bgc->lock, flags);
+
+ if (val)
+ priv->imask |= mask;
+ else
+ priv->imask &= ~mask;
+ bgc->write_reg(&priv->regs->imask, priv->imask);
+
+ spin_unlock_irqrestore(&bgc->lock, flags);
+}
+
+static int grgpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+ struct grgpio_priv *priv = grgpio_gc_to_priv(gc);
+ int index, irq;
+
+ if (!priv->irqmap || offset > gc->ngpio)
+ return -ENXIO;
+
+ index = priv->irqmap[offset];
+ if (index < 0)
+ return -ENXIO;
+
+ irq = irq_of_parse_and_map(priv->bgc.gc.dev->of_node, index);
+ if (irq) {
+ /* Enable interrupt and return irq */
+ grgpio_set_imask(priv, offset, 1);
+ return irq;
+ } else {
+ return -ENXIO;
+ }
+}
+
+static void grgpio_free(struct gpio_chip *gc, unsigned offset)
+{
+ struct grgpio_priv *priv = grgpio_gc_to_priv(gc);
+ struct bgpio_chip *bgc = &priv->bgc;
+ unsigned long mask = bgc->pin2mask(bgc, offset);
+
+ if (unlikely(priv->imask & mask))
+ grgpio_set_imask(priv, offset, 0);
+}
+
+static int grgpio_probe(struct platform_device *ofdev)
+{
+ struct device_node *np = ofdev->dev.of_node;
+ struct grgpio_regs __iomem *regs;
+ struct gpio_chip *gc;
+ struct bgpio_chip *bgc;
+ struct grgpio_priv *priv;
+ struct resource *res;
+ int err, i, size;
+ u32 prop;
+ s32 *irqmap;
+ char *label;
+
+ priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&ofdev->dev, "Could not allocate priv\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
+ regs = devm_request_and_ioremap(&ofdev->dev, res);
+ if (!regs) {
+ dev_err(&ofdev->dev, "Couldn't map registers\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ bgc = &priv->bgc;
+ err = bgpio_init(bgc, &ofdev->dev, 4, ®s->data, ®s->output, NULL,
+ ®s->dir, NULL, BGPIOF_BIG_ENDIAN);
+ if (err) {
+ dev_err(&ofdev->dev, "bgpio_init() failed\n");
+ return err;
+ }
+
+ priv->regs = regs;
+ priv->imask = bgc->read_reg(®s->imask);
+
+ gc = &bgc->gc;
+ gc->of_node = np;
+ gc->owner = THIS_MODULE;
+ gc->to_irq = grgpio_to_irq;
+ gc->free = grgpio_free;
+
+ err = of_property_read_u32(np, "base", &prop);
+ if (err) {
+ dev_dbg(&ofdev->dev, "No base property: use dynamic base\n");
+ gc->base = -1;
+ } else {
+ gc->base = prop;
+ }
+
+ err = of_property_read_u32(np, "nbits", &prop);
+ if (err || prop <= 0 || prop > GRGPIO_MAX_NGPIO) {
+ gc->ngpio = GRGPIO_MAX_NGPIO;
+ dev_dbg(&ofdev->dev,
+ "No or invalid nbits property: assume %d\n", gc->ngpio);
+ } else {
+ gc->ngpio = prop;
+ }
+
+ irqmap = (s32 *)of_get_property(np, "irqmap", &size);
+ if (irqmap) {
+ if (size < gc->ngpio) {
+ dev_err(&ofdev->dev,
+ "irqmap shorter than ngpio (%d < %d)\n",
+ size, gc->ngpio);
+ return -EINVAL;
+ }
+
+ priv->irqmap = devm_kzalloc(&ofdev->dev,
+ gc->ngpio * sizeof(s32),
+ GFP_KERNEL);
+ if (!priv->irqmap) {
+ dev_err(&ofdev->dev,
+ "Could not allocate memory for irqmap\n");
+ return -ENOMEM;
+ }
+ for (i = 0; i < gc->ngpio; i++)
+ priv->irqmap[i] = irqmap[i];
+ } else {
+ dev_dbg(&ofdev->dev, "No irqmap\n");
+ }
+
+ label = kstrdup(np->full_name, GFP_KERNEL);
+ if (label)
+ gc->label = label;
+
+ platform_set_drvdata(ofdev, priv);
+
+ err = gpiochip_add(gc);
+ if (err) {
+ dev_err(&ofdev->dev, "Couldn't add gpiochip\n");
+ return err;
+ }
+
+ dev_info(&ofdev->dev, "regs=0x%p, base=%d, npgio=%d\n",
+ priv->regs, gc->base, gc->ngpio);
+
+ return 0;
+}
+
+static int grgpio_remove(struct platform_device *ofdev)
+{
+ dev_set_drvdata(&ofdev->dev, NULL);
+
+ return 0;
+}
+
+static struct of_device_id grgpio_match[] = {
+ {.name = "GAISLER_GPIO"},
+ {.name = "01_01a"},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, grgpio_match);
+
+static struct platform_driver grgpio_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = grgpio_match,
+ },
+ .probe = grgpio_probe,
+ .remove = grgpio_remove,
+};
+
+module_platform_driver(grgpio_driver);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB.");
+MODULE_DESCRIPTION("Driver for Aeroflex Gaisler GRGPIO");
+MODULE_LICENSE("GPL");
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists