[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <201302061341.06964.poeschel@lemonage.de>
Date: Wed, 6 Feb 2013 13:41:06 +0100
From: Lars Poeschel <poeschel@...onage.de>
To: Matt Porter <mporter@...com>
Cc: Venkatraman S <svenkatr@...com>, Chris Ball <cjb@...top.org>,
Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <rob.herring@...xeda.com>,
Vinod Koul <vinod.koul@...el.com>,
Tony Lindgren <tony@...mide.com>,
Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Arnd Bergmann <arnd@...db.de>, Dan Williams <djbw@...com>,
Jon Hunter <jon-hunter@...com>,
Santosh Shilimkar <santosh.shilimkar@...com>
Subject: Re: [PATCH 0/3] omap_hsmmc DT DMA Client support
Hi Matt!
At first thanks for you efforts on DMA Engine on AM33XX.
On Friday 01 February 2013 at 22:01:17, Matt Porter wrote:
> This series adds DT DMA Engine Client support to the omap_hsmmc.
> It leverages the generic DMA OF helpers in -next and the
> dma_request_slave_channel_compat() wrapper introduced in the
> AM33XX DMA Engine series to support DMA in omap_hsmmc on platforms
> booting via DT. These platforms include omap2/3/4/5 and am33xx.
>
> These patches were split out from the v5 version of the AM33XX DMA
> series and split from the EDMA-specific omap_hsmmc changes.
>
> The series depends on the following patches:
>
> - dmaengine DT support and edma dmaengine driver fix from
> the git://git.infradead.org/users/vkoul/slave-dma.git next
> branch
> - dma_request_slave_channel_compat() support
> https://patchwork.kernel.org/patch/2081671/
>
> The series with all dependencies can be found at
> https://github.com/ohporter/linux/tree/omap-hsmmc-dt-dmaengine-v1
I cloned your github repository and did short testing with it. I get the
following error when the kernel mounts my sd-card:
Starting udev
[ 5.884738] udevd[72]: starting version 182
[ 8.879651] edma-dma-engine edma-dma-engine.0: Exceeded max SG segments 33
> 16
[ 8.887377] omap_hsmmc mmc.3: prep_slave_sg() failed
[ 8.892588] omap_hsmmc mmc.3: MMC start dma failure
[ 8.897725] mmcblk0: unknown error -1 sending read/write command, card
status 0x900
[ 8.905889] end_request: I/O error, dev mmcblk0, sector 17039
[ 8.911926] end_request: I/O error, dev mmcblk0, sector 17047
[ 8.917934] end_request: I/O error, dev mmcblk0, sector 17055
[ 8.923960] end_request: I/O error, dev mmcblk0, sector 17063
[ 8.929967] end_request: I/O error, dev mmcblk0, sector 17071
[ 8.935988] end_request: I/O error, dev mmcblk0, sector 17079
[ 8.942010] end_request: I/O error, dev mmcblk0, sector 17087
[ 8.948016] end_request: I/O error, dev mmcblk0, sector 17095
[ 8.954037] end_request: I/O error, dev mmcblk0, sector 17103
[ 8.960043] end_request: I/O error, dev mmcblk0, sector 17111
[ 9.020919] EXT4-fs error (device mmcblk0p2): __ext4_get_inode_loc:3764:
inode #8: block 239: comm mount: unable to read itable block
[ 9.033514] EXT4-fs (mmcblk0p2): no journal found
[ 9.043799] kjournald starting. Commit interval 5 seconds
[ 9.049589] EXT3-fs (mmcblk0p2): warning: mounting fs with errors, running
e2fsck is recommended
[ 9.060940] EXT3-fs (mmcblk0p2): using internal journal
[ 9.066437] EXT3-fs (mmcblk0p2): recovery complete
[ 9.071460] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
After that the filesystem on the sd-card has an error that I have to fix with
e2fsck. As rootfs I use a nfsroot.
In my quick tests, same setup, I don't get any error on edma-dmaengine-
am33xx-v5 branch of your repository.
If you need any further information, let me now.
Regards,
Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists