| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 6 Feb 2013 17:23:51 +0100
From: Heiko Carstens <heiko.carstens@...ibm.com>
To: arnd@...db.de, axboe@...nel.dk, cbou@...l.ru, davem@...emloft.net,
dtor@...l.ru, dwmw2@...radead.org, grant.likely@...retlab.ca,
gregkh@...uxfoundation.org, jkosina@...e.cz, jslaby@...e.cz,
khali@...ux-fr.org, mchehab@...hat.com, perex@...ex.cz,
sameo@...ux.intel.com, tiwai@...e.de, w.sang@...gutronix.de
Cc: linux-kernel@...r.kernel.org, sebott@...ux.vnet.ibm.com,
gerald.schaefer@...ibm.com, schwidefsky@...ibm.com,
Heiko Carstens <heiko.carstens@...ibm.com>
Subject: [PATCH 03/15] drivers/mfd: add missing GENERIC_HARDIRQS dependecies
A lot of mfd drivers select MFD_CORE which however depends on
GENERIC_HARDIRQS support.
So add the missing dependency to all drivers to get rid of
this link error:
ERROR: "irq_create_mapping" [drivers/mfd/mfd-core.ko] undefined!
Cc: Samuel Ortiz <sameo@...ux.intel.com>
Signed-off-by: Heiko Carstens <heiko.carstens@...ibm.com>
---
drivers/mfd/Kconfig | 72 +++++++++++++++++++++++++++------------------------
1 file changed, 38 insertions(+), 34 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ff553ba..671f5b1 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -65,7 +65,7 @@ config MFD_SM501_GPIO
config MFD_RTSX_PCI
tristate "Support for Realtek PCI-E card reader"
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
select MFD_CORE
help
This supports for Realtek PCI-Express card reader including rts5209,
@@ -95,7 +95,7 @@ config MFD_DM355EVM_MSP
config MFD_TI_SSP
tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X
+ depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
select MFD_CORE
---help---
Say Y here if you want support for the Sequencer Serial Port
@@ -109,6 +109,7 @@ config MFD_TI_AM335X_TSCADC
select MFD_CORE
select REGMAP
select REGMAP_MMIO
+ depends on GENERIC_HARDIRQS
help
If you say yes here you get support for Texas Instruments series
of Touch Screen /ADC chips.
@@ -126,6 +127,7 @@ config HTC_EGPIO
config HTC_PASIC3
tristate "HTC PASIC3 LED/DS1WM chip support"
select MFD_CORE
+ depends on GENERIC_HARDIRQS
help
This core driver provides register access for the LED/DS1WM
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
@@ -157,6 +159,7 @@ config MFD_LM3533
depends on I2C
select MFD_CORE
select REGMAP_I2C
+ depends on GENERIC_HARDIRQS
help
Say yes here to enable support for National Semiconductor / TI
LM3533 Lighting Power chips.
@@ -171,6 +174,7 @@ config TPS6105X
select REGULATOR
select MFD_CORE
select REGULATOR_FIXED_VOLTAGE
+ depends on GENERIC_HARDIRQS
help
This option enables a driver for the TP61050/TPS61052
high-power "white LED driver". This boost converter is
@@ -193,7 +197,7 @@ config TPS65010
config TPS6507X
tristate "TPS6507x Power Management / Touch Screen chips"
select MFD_CORE
- depends on I2C
+ depends on I2C && GENERIC_HARDIRQS
help
If you say yes here you get support for the TPS6507x series of
Power Management / Touch Screen chips. These include voltage
@@ -204,7 +208,7 @@ config TPS6507X
config MFD_TPS65217
tristate "TPS65217 Power Management / White LED chips"
- depends on I2C
+ depends on I2C && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
help
@@ -234,7 +238,7 @@ config MFD_TPS6586X
config MFD_TPS65910
bool "TPS65910 Power Management chip"
- depends on I2C=y && GPIOLIB
+ depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -251,7 +255,7 @@ config MFD_TPS65912_I2C
bool "TPS65912 Power Management chip with I2C"
select MFD_CORE
select MFD_TPS65912
- depends on I2C=y && GPIOLIB
+ depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
help
If you say yes here you get support for the TPS65912 series of
PM chips with I2C interface.
@@ -260,7 +264,7 @@ config MFD_TPS65912_SPI
bool "TPS65912 Power Management chip with SPI"
select MFD_CORE
select MFD_TPS65912
- depends on SPI_MASTER && GPIOLIB
+ depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
help
If you say yes here you get support for the TPS65912 series of
PM chips with SPI interface.
@@ -330,13 +334,13 @@ config TWL4030_POWER
config MFD_TWL4030_AUDIO
bool
- depends on TWL4030_CORE
+ depends on TWL4030_CORE && GENERIC_HARDIRQS
select MFD_CORE
default n
config TWL6040_CORE
bool "Support for TWL6040 audio codec"
- depends on I2C=y
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -405,7 +409,7 @@ config MFD_TMIO
config MFD_T7L66XB
bool "Support Toshiba T7L66XB"
- depends on ARM && HAVE_CLK
+ depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
select MFD_CORE
select MFD_TMIO
help
@@ -413,7 +417,7 @@ config MFD_T7L66XB
config MFD_SMSC
bool "Support for the SMSC ECE1099 series chips"
- depends on I2C=y
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
help
@@ -460,7 +464,7 @@ config MFD_DA9052_SPI
select REGMAP_SPI
select REGMAP_IRQ
select PMIC_DA9052
- depends on SPI_MASTER=y
+ depends on SPI_MASTER=y && GENERIC_HARDIRQS
help
Support for the Dialog Semiconductor DA9052 PMIC
when controlled using SPI. This driver provides common support
@@ -472,7 +476,7 @@ config MFD_DA9052_I2C
select REGMAP_I2C
select REGMAP_IRQ
select PMIC_DA9052
- depends on I2C=y
+ depends on I2C=y && GENERIC_HARDIRQS
help
Support for the Dialog Semiconductor DA9052 PMIC
when controlled using I2C. This driver provides common support
@@ -485,7 +489,7 @@ config MFD_DA9055
select REGMAP_IRQ
select PMIC_DA9055
select MFD_CORE
- depends on I2C=y
+ depends on I2C=y && GENERIC_HARDIRQS
help
Say yes here for support of Dialog Semiconductor DA9055. This is
a Power Management IC. This driver provides common support for
@@ -508,7 +512,7 @@ config PMIC_ADP5520
config MFD_LP8788
bool "Texas Instruments LP8788 Power Management Unit Driver"
- depends on I2C=y
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN
@@ -611,7 +615,7 @@ config MFD_ARIZONA_I2C
select MFD_ARIZONA
select MFD_CORE
select REGMAP_I2C
- depends on I2C
+ depends on I2C && GENERIC_HARDIRQS
help
Support for the Wolfson Microelectronics Arizona platform audio SoC
core functionality controlled via I2C.
@@ -621,7 +625,7 @@ config MFD_ARIZONA_SPI
select MFD_ARIZONA
select MFD_CORE
select REGMAP_SPI
- depends on SPI_MASTER
+ depends on SPI_MASTER && GENERIC_HARDIRQS
help
Support for the Wolfson Microelectronics Arizona platform audio SoC
core functionality controlled via I2C.
@@ -641,7 +645,7 @@ config MFD_WM5110
config MFD_WM8400
bool "Support Wolfson Microelectronics WM8400"
select MFD_CORE
- depends on I2C=y
+ depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -785,7 +789,7 @@ config MFD_MC13783
config MFD_MC13XXX
tristate
- depends on SPI_MASTER || I2C
+ depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
select MFD_CORE
select MFD_MC13783
help
@@ -796,7 +800,7 @@ config MFD_MC13XXX
config MFD_MC13XXX_SPI
tristate "Freescale MC13783 and MC13892 SPI interface"
- depends on SPI_MASTER
+ depends on SPI_MASTER && GENERIC_HARDIRQS
select REGMAP_SPI
select MFD_MC13XXX
help
@@ -804,7 +808,7 @@ config MFD_MC13XXX_SPI
config MFD_MC13XXX_I2C
tristate "Freescale MC13892 I2C interface"
- depends on I2C
+ depends on I2C && GENERIC_HARDIRQS
select REGMAP_I2C
select MFD_MC13XXX
help
@@ -822,7 +826,7 @@ config ABX500_CORE
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
- depends on I2C=y && ABX500_CORE
+ depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
select MFD_CORE
default y if ARCH_U300
help
@@ -909,7 +913,7 @@ config MFD_TIMBERDALE
config LPC_SCH
tristate "Intel SCH LPC"
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
select MFD_CORE
help
LPC bridge function of the Intel SCH provides support for
@@ -917,7 +921,7 @@ config LPC_SCH
config LPC_ICH
tristate "Intel ICH LPC"
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
select MFD_CORE
help
The LPC bridge function of the Intel ICH provides support for
@@ -928,7 +932,7 @@ config LPC_ICH
config MFD_RDC321X
tristate "Support for RDC-R321x southbridge"
select MFD_CORE
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
help
Say yes here if you want to have support for the RDC R-321x SoC
southbridge which provides access to GPIOs and Watchdog using the
@@ -937,7 +941,7 @@ config MFD_RDC321X
config MFD_JANZ_CMODIO
tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
select MFD_CORE
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
help
This is the core driver for the Janz CMOD-IO PCI MODULbus
carrier board. This device is a PCI to MODULbus bridge which may
@@ -955,7 +959,7 @@ config MFD_JZ4740_ADC
config MFD_VX855
tristate "Support for VIA VX855/VX875 integrated south bridge"
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
select MFD_CORE
help
Say yes here to enable support for various functions of the
@@ -964,7 +968,7 @@ config MFD_VX855
config MFD_WL1273_CORE
tristate "Support for TI WL1273 FM radio."
- depends on I2C
+ depends on I2C && GENERIC_HARDIRQS
select MFD_CORE
default n
help
@@ -1028,7 +1032,7 @@ config MFD_TPS65090
config MFD_AAT2870_CORE
bool "Support for the AnalogicTech AAT2870"
select MFD_CORE
- depends on I2C=y && GPIOLIB
+ depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
help
If you say yes here you get support for the AAT2870.
This driver provides common support for accessing the device,
@@ -1060,7 +1064,7 @@ config MFD_RC5T583
config MFD_STA2X11
bool "STA2X11 multi function device support"
- depends on STA2X11
+ depends on STA2X11 && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_MMIO
@@ -1077,7 +1081,7 @@ config MFD_PALMAS
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y
+ depends on I2C=y && GENERIC_HARDIRQS
help
If you say yes here you get support for the Palmas
series of PMIC chips from Texas Instruments.
@@ -1085,7 +1089,7 @@ config MFD_PALMAS
config MFD_VIPERBOARD
tristate "Support for Nano River Technologies Viperboard"
select MFD_CORE
- depends on USB
+ depends on USB && GENERIC_HARDIRQS
default n
help
Say yes here if you want support for Nano River Technologies
@@ -1099,7 +1103,7 @@ config MFD_VIPERBOARD
config MFD_RETU
tristate "Support for Retu multi-function device"
select MFD_CORE
- depends on I2C
+ depends on I2C && GENERIC_HARDIRQS
select REGMAP_IRQ
help
Retu is a multi-function device found on Nokia Internet Tablets
@@ -1110,7 +1114,7 @@ config MFD_AS3711
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y
+ depends on I2C=y && GENERIC_HARDIRQS
help
Support for the AS3711 PMIC from AMS
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists