| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1360708860-23466-11-git-send-email-linus.walleij@linaro.org>
Date: Tue, 12 Feb 2013 23:41:00 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: Jens Axboe <axboe@...nel.dk>
Cc: linux-kernel@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 9/9] block: xd: replace all printks with pr_*
This replaces all the printk() statements with pr_* messages
tagged with the apropriate log level. Errors are printed as
pr_err() etc.
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
drivers/block/xd.c | 97 ++++++++++++++++++++++++++++++++++--------------------
1 file changed, 62 insertions(+), 35 deletions(-)
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index 7ecebd4..8ee500f 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -331,7 +331,7 @@ static inline u_int xd_wait_for_IRQ(void)
release_dma_lock(flags);
if (xd_error) {
- printk("xd: missed IRQ - command aborted\n");
+ pr_err("xd: missed IRQ - command aborted\n");
xd_error = 0;
return (1);
}
@@ -397,7 +397,7 @@ static u_int xd_command(u_char *command, u_char mode, u_char *indata,
if (csb & CSB_ERROR) { /* read sense data if error */
xd_build(cmdblk,CMD_SENSE,(csb & CSB_LUN) >> 5,0,0,0,0,0);
if (xd_command(cmdblk,0,sense,NULL,NULL,XD_TIMEOUT))
- printk("xd: warning! sense command failed!\n");
+ pr_warning("xd: warning! sense command failed!\n");
}
pr_debug("%s: completed with csb = 0x%X\n", __func__, csb);
@@ -426,7 +426,8 @@ static void __init xd_setparam (u_char command, u_char drive, u_char heads,
/* Some controllers require geometry info as data, not command */
if (xd_command(cmdblk,PIO_MODE,NULL,&cmdblk[6],NULL,XD_TIMEOUT * 2))
- printk("xd: error setting characteristics for xd%c\n", 'a'+drive);
+ pr_err("xd: error setting characteristics for xd%c\n",
+ 'a' + drive);
}
/**
@@ -439,7 +440,8 @@ static void xd_recalibrate(u_char drive)
xd_build(cmdblk,CMD_RECALIBRATE,drive,0,0,0,0,0);
if (xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT * 8))
- printk("xd%c: warning! error recalibrating, controller may be unstable\n", 'a'+drive);
+ pr_warning("xd%c: warning! error recalibrating, controller may be unstable\n",
+ 'a' + drive);
}
/**
@@ -488,29 +490,40 @@ static int xd_readwrite(u_char operation, struct xd_info *p, char *buffer,
switch (xd_command(cmdblk,mode,(u_char *)(*real_buffer),(u_char *)(*real_buffer),sense,XD_TIMEOUT)) {
case 1:
- printk("xd%c: %s timeout, recalibrating drive\n",'a'+drive,(operation == READ ? "read" : "write"));
+ pr_err("xd%c: %s timeout, recalibrating drive\n",
+ 'a' + drive,
+ (operation == READ ? "read" : "write"));
xd_recalibrate(drive);
spin_lock_irq(&xd_lock);
return -EIO;
case 2:
if (sense[0] & 0x30) {
- printk("xd%c: %s - ",'a'+drive,(operation == READ ? "reading" : "writing"));
+ pr_err("xd%c: %s - ", 'a' + drive,
+ (operation == READ ? "reading" : "writing"));
switch ((sense[0] & 0x30) >> 4) {
- case 0: printk("drive error, code = 0x%X",sense[0] & 0x0F);
+ case 0:
+ pr_cont("drive error, code = 0x%X",
+ sense[0] & 0x0F);
break;
- case 1: printk("controller error, code = 0x%X",sense[0] & 0x0F);
+ case 1:
+ pr_cont("controller error, code = 0x%X",
+ sense[0] & 0x0F);
break;
- case 2: printk("command error, code = 0x%X",sense[0] & 0x0F);
+ case 2:
+ pr_cont("command error, code = 0x%X",
+ sense[0] & 0x0F);
break;
- case 3: printk("miscellaneous error, code = 0x%X",sense[0] & 0x0F);
+ case 3:
+ pr_cont("miscellaneous error, code = 0x%X",
+ sense[0] & 0x0F);
break;
}
}
if (sense[0] & 0x80)
- printk(" - CHS = %d/%d/%d\n",((sense[2] & 0xC0) << 2) | sense[3],sense[1] & 0x1F,sense[2] & 0x3F);
+ pr_cont(" - CHS = %d/%d/%d\n",((sense[2] & 0xC0) << 2) | sense[3],sense[1] & 0x1F,sense[2] & 0x3F);
/* reported drive number = (sense[1] & 0xE0) >> 5 */
else
- printk(" - no valid disk address\n");
+ pr_cont(" - no valid disk address\n");
spin_lock_irq(&xd_lock);
return -EIO;
}
@@ -664,7 +677,7 @@ static irqreturn_t xd_interrupt_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
else
- printk("xd: unexpected interrupt\n");
+ pr_err("xd: unexpected interrupt\n");
return IRQ_NONE;
}
@@ -707,8 +720,10 @@ static void __init xd_dtc_init_controller(unsigned int address)
case 0xCA000: xd_iobase = 0x324;
case 0xD0000: /*5150CX*/
case 0xD8000: break; /*5150CX & 5150XL*/
- default: printk("xd_dtc_init_controller: unsupported BIOS address %06x\n",address);
- break;
+ default:
+ pr_err("%s: unsupported BIOS address %06x\n",
+ __func__, address);
+ break;
}
xd_maxsectors = 0x01; /* my card seems to have trouble doing multi-block transfers? */
@@ -756,7 +771,8 @@ static void __init xd_dtc5150cx_init_drive(u_char drive)
#endif /* 0 */
}
else {
- printk("xd%c: undetermined drive geometry\n",'a'+drive);
+ pr_err("xd%c: undetermined drive geometry\n",
+ 'a' + drive);
return;
}
xd_info[drive].control = 5; /* control byte */
@@ -785,10 +801,12 @@ static void __init xd_dtc_init_drive(u_char drive)
xd_setparam(CMD_DTCSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,((u_short *) (buf + 1))[0x05],((u_short *) (buf + 1))[0x06],buf[0x0F]);
xd_build(cmdblk,CMD_DTCSETSTEP,drive,0,0,0,0,7);
if (xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT * 2))
- printk("xd_dtc_init_drive: error setting step rate for xd%c\n", 'a'+drive);
+ pr_err("%s: error setting step rate for xd%c\n",
+ __func__, 'a'+drive);
}
else
- printk("xd_dtc_init_drive: error reading geometry for xd%c\n", 'a'+drive);
+ pr_err("%s: error reading geometry for xd%c\n",
+ __func__, 'a'+drive);
}
static void __init xd_wd_init_controller(unsigned int address)
@@ -801,7 +819,9 @@ static void __init xd_wd_init_controller(unsigned int address)
case 0xCE000: xd_iobase = 0x32C; break;
case 0xD0000: xd_iobase = 0x328; break; /* ? */
case 0xD8000: xd_iobase = 0x32C; break; /* ? */
- default: printk("xd_wd_init_controller: unsupported BIOS address %06x\n",address);
+ default:
+ pr_err("%s: unsupported BIOS address %06x\n",
+ __func__, address);
break;
}
/* this one doesn't wrap properly either... */
@@ -880,7 +900,8 @@ static void __init xd_wd_init_drive(u_char drive)
}
}
else
- printk("xd_wd_init_drive: error reading geometry for xd%c\n",'a'+drive);
+ pr_err("%s: error reading geometry for xd%c\n",
+ __func__, 'a' + drive);
}
static void __init xd_seagate_init_controller (unsigned int address)
@@ -891,8 +912,10 @@ static void __init xd_seagate_init_controller (unsigned int address)
case 0xD0000: xd_iobase = 0x324; break;
case 0xD8000: xd_iobase = 0x328; break;
case 0xE0000: xd_iobase = 0x32C; break;
- default: printk("xd_seagate_init_controller: unsupported BIOS address %06x\n",address);
- break;
+ default:
+ pr_err("%s: unsupported BIOS address %06x\n",
+ __func__, address);
+ break;
}
xd_maxsectors = 0x40;
@@ -912,7 +935,8 @@ static void __init xd_seagate_init_drive(u_char drive)
xd_info[drive].control = 0;
}
else
- printk("xd_seagate_init_drive: error reading geometry from xd%c\n", 'a'+drive);
+ pr_err("%s: error reading geometry from xd%c\n",
+ __func__, 'a' + drive);
}
/* Omti support courtesy Dirk Melchers */
@@ -932,7 +956,8 @@ static void __init xd_omti_init_controller(unsigned int address)
xd_iobase = 0x32C;
break;
default:
- printk("xd_omti_init_controller: unsupported BIOS address %06x\n",address);
+ pr_err("%s: unsupported BIOS address %06x\n",
+ __func__, address);
break;
}
@@ -976,7 +1001,8 @@ static void __init xd_xebec_init_controller(unsigned int address)
case 0xE0000:
break;
default:
- printk("xd_xebec_init_controller: unsupported BIOS address %06x\n",address);
+ pr_err("%s: unsupported BIOS address %06x\n",
+ __func__, address);
break;
}
@@ -1073,7 +1099,8 @@ static void __init do_xd_setup(int *integers)
if ((integers[1] >= 0) && (integers[1] < ARRAY_SIZE(xd_sigs)))
xd_type = integers[1];
case 0: break;
- default:printk("xd: too many parameters for xd\n");
+ default:
+ pr_err("xd: too many parameters for xd\n");
}
xd_maxsectors = 0x01;
}
@@ -1109,18 +1136,18 @@ static int __init xd_init(void)
if (xd_detect(&controller,&address)) {
- printk("Detected a%s controller (type %d) at address %06x\n",
+ pr_info("Detected a%s controller (type %d) at address %06x\n",
xd_sigs[controller].name,controller,address);
if (!request_region(xd_iobase,4,"xd")) {
- printk("xd: Ports at 0x%x are not available\n",
- xd_iobase);
+ pr_err("xd: Ports at 0x%x are not available\n",
+ xd_iobase);
goto out2;
}
if (controller)
xd_sigs[controller].init_controller(address);
xd_drives = xd_initdrives(xd_sigs[controller].init_drive);
- printk("Detected %d hard drive%s (using IRQ%d & DMA%d)\n",
+ pr_info("Detected %d hard drive%s (using IRQ%d & DMA%d)\n",
xd_drives,xd_drives == 1 ? "" : "s",xd_irq,xd_dma);
}
@@ -1132,7 +1159,7 @@ static int __init xd_init(void)
if (!xd_dma_buffer && xd_maxsectors) {
xd_dma_buffer = (char *)xd_dma_mem_alloc(xd_maxsectors * 0x200);
if (!xd_dma_buffer) {
- printk(KERN_ERR "xd: Out of memory.\n");
+ pr_err("xd: Out of memory.\n");
goto out3;
}
}
@@ -1154,19 +1181,19 @@ static int __init xd_init(void)
disk->private_data = p;
disk->queue = xd_queue;
set_capacity(disk, p->heads * p->cylinders * p->sectors);
- printk(" %s: CHS=%d/%d/%d\n", disk->disk_name,
+ pr_info(" %s: CHS=%d/%d/%d\n", disk->disk_name,
p->cylinders, p->heads, p->sectors);
xd_gendisk[i] = disk;
}
err = -EBUSY;
if (request_irq(xd_irq,xd_interrupt_handler, 0, "XT hard disk", NULL)) {
- printk("xd: unable to get IRQ%d\n",xd_irq);
+ pr_err("xd: unable to get IRQ%d\n", xd_irq);
goto out4;
}
if (request_dma(xd_dma,"xd")) {
- printk("xd: unable to get DMA%d\n",xd_dma);
+ pr_err("xd: unable to get DMA%d\n", xd_dma);
goto out5;
}
@@ -1249,7 +1276,7 @@ static int __init xd_manual_geo_init (char *str)
get_options (str, ARRAY_SIZE(integers), integers);
if (integers[0]%3 != 0) {
- printk("xd: incorrect number of parameters for xd_geo\n");
+ pr_err("xd: incorrect number of parameters for xd_geo\n");
return 1;
}
for (i = 0; (i < integers[0]) && (i < 3*XD_MAXDRIVES); i++)
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists