| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHfPSqCwqD2gzB9eiTi1hSQvRgwbsjp9NfEb3RKpy+_+DbdhzQ@mail.gmail.com>
Date: Wed, 13 Feb 2013 08:18:58 +0530
From: Naveen Krishna Ch <naveenkrishna.ch@...il.com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Naveen Krishna Chatradhi <ch.naveen@...sung.com>,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>, dianders@...omium.org,
gregkh@...uxfoundation.org, lars@...afoo.de
Subject: Re: iio: adc: add exynos5 adc driver under iio framwork
On 13 February 2013 02:37, Guenter Roeck <linux@...ck-us.net> wrote:
> On Wed, Jan 23, 2013 at 04:58:06AM -0000, Naveen Krishna Chatradhi wrote:
>> This patch add an ADC IP found on EXYNOS5 series socs from Samsung.
>> Also adds the Documentation for device tree bindings.
>>
>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
>>
>> ---
>> Changes since v1:
>>
>> 1. Fixed comments from Lars
>> 2. Added support for ADC on EXYNOS5410
>>
>> Changes since v2:
>>
>> 1. Changed the instance name for (struct iio_dev *) to indio_dev
>> 2. Changed devm_request_irq to request_irq
>>
>> Few doubts regarding the mappings and child device handling.
>> Kindly, suggest me better methods.
>>
>> .../bindings/arm/samsung/exynos5-adc.txt | 37 ++
>> drivers/iio/adc/Kconfig | 7 +
>> drivers/iio/adc/Makefile | 1 +
>> drivers/iio/adc/exynos5_adc.c | 464 ++++++++++++++++++++
>> 4 files changed, 509 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>> create mode 100644 drivers/iio/adc/exynos5_adc.c
>>
>> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>> new file mode 100644
>> index 0000000..9a5b515
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>> @@ -0,0 +1,37 @@
>> +Samsung Exynos5 Analog to Digital Converter bindings
>> +
>> +Required properties:
>> +- compatible: Must be "samsung,exynos5250-adc" for exynos5250 controllers.
>> +- reg: Contains ADC register address range (base address and
>> + length).
>> +- interrupts: Contains the interrupt information for the timer. The
>> + format is being dependent on which interrupt controller
>> + the Samsung device uses.
>> +
>> +Note: child nodes can be added for auto probing from device tree.
>> +
>> +Example: adding device info in dtsi file
>> +
>> +adc@...10000 {
>> + compatible = "samsung,exynos5250-adc";
>> + reg = <0x12D10000 0x100>;
>> + interrupts = <0 106 0>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +};
>> +
>> +
>> +Example: Adding child nodes in dts file
>> +
>> +adc@...10000 {
>> +
>> + /* NTC thermistor is a hwmon device */
>> + ncp15wb473@0 {
>> + compatible = "ntc,ncp15wb473";
>> + reg = <0x0>;
>> + pullup-uV = <1800000>;
>> + pullup-ohm = <47000>;
>> + pulldown-ohm = <0>;
>> + };
>> +};
>
> How about:
>
> adc: adc@...10000 {
> compatible = "samsung,exynos5250-adc";
> reg = <0x12D10000 0x100>;
> interrupts = <0 106 0>;
> #io-channel-cells = <1>;
> };
>
> ...
>
> ncp15wb473@0 {
> compatible = "ntc,ncp15wb473";
> reg = <0x0>; /* is this needed ? */
> io-channels = <&adc 0>;
> io-channel-names = "adc";
> pullup-uV = <1800000>; /* uV or uv ? */
> pullup-ohm = <47000>;
> pulldown-ohm = <0>;
> };
>
> The ncp15wb473 driver would then use either iio_channel_get_all() to get the iio
> channel list or, if it only supports one adc channel per instance, iio_channel_get().
>
> In that context, it would probably make sense to rework the ntc_thermistor
> driver to support both DT as well as direct instantiation using access functions
> and platform data (as it does today).
>
> Also see https://patchwork.kernel.org/patch/2112171/.
>
> Thanks,
> Guenter
Yes Guenter, I will rebase and submit the ADC driver based on your patch set.
>
>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>> index fe822a1..33ceabf 100644
>> --- a/drivers/iio/adc/Kconfig
>> +++ b/drivers/iio/adc/Kconfig
>> @@ -91,6 +91,13 @@ config AT91_ADC
>> help
>> Say yes here to build support for Atmel AT91 ADC.
>>
>> +config EXYNOS5_ADC
>> + bool "Exynos5 ADC driver support"
>> + help
>> + Core support for the ADC block found in the Samsung EXYNOS5 series
>> + of SoCs for drivers such as the touchscreen and hwmon to use to share
>> + this resource.
>> +
>> config LP8788_ADC
>> bool "LP8788 ADC driver"
>> depends on MFD_LP8788
>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>> index 2d5f100..5b4a4f6 100644
>> --- a/drivers/iio/adc/Makefile
>> +++ b/drivers/iio/adc/Makefile
>> @@ -10,6 +10,7 @@ obj-$(CONFIG_AD7791) += ad7791.o
>> obj-$(CONFIG_AD7793) += ad7793.o
>> obj-$(CONFIG_AD7887) += ad7887.o
>> obj-$(CONFIG_AT91_ADC) += at91_adc.o
>> +obj-$(CONFIG_EXYNOS5_ADC) += exynos5_adc.o
>> obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
>> obj-$(CONFIG_MAX1363) += max1363.o
>> obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
>> diff --git a/drivers/iio/adc/exynos5_adc.c b/drivers/iio/adc/exynos5_adc.c
>> new file mode 100644
>> index 0000000..8982675
>> --- /dev/null
>> +++ b/drivers/iio/adc/exynos5_adc.c
>> @@ -0,0 +1,464 @@
>> +/*
>> + * exynos5_adc.c - Support for ADC in EXYNOS5 SoCs
>> + *
>> + * 8 ~ 10 channel, 10/12-bit ADC
>> + *
>> + * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/delay.h>
>> +#include <linux/kernel.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/clk.h>
>> +#include <linux/completion.h>
>> +#include <linux/of.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/of_platform.h>
>> +
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/machine.h>
>> +#include <linux/iio/driver.h>
>> +
>> +enum adc_version {
>> + ADC_V1,
>> + ADC_V2
>> +};
>> +
>> +/* EXYNOS5250 ADC_V1 registers definitions */
>> +#define ADC_V1_CON(x) ((x) + 0x00)
>> +#define ADC_V1_DLY(x) ((x) + 0x08)
>> +#define ADC_V1_DATX(x) ((x) + 0x0C)
>> +#define ADC_V1_INTCLR(x) ((x) + 0x18)
>> +#define ADC_V1_MUX(x) ((x) + 0x1c)
>> +
>> +/* EXYNOS5410 ADC_V2 registers definitions */
>> +#define ADC_V2_CON1(x) ((x) + 0x00)
>> +#define ADC_V2_CON2(x) ((x) + 0x04)
>> +#define ADC_V2_STAT(x) ((x) + 0x08)
>> +#define ADC_V2_INT_EN(x) ((x) + 0x10)
>> +#define ADC_V2_INT_ST(x) ((x) + 0x14)
>> +#define ADC_V2_VER(x) ((x) + 0x20)
>> +
>> +/* Bit definitions for ADC_V1 */
>> +#define ADC_V1_CON_RES (1u << 16)
>> +#define ADC_V1_CON_PRSCEN (1u << 14)
>> +#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6)
>> +#define ADC_V1_CON_STANDBY (1u << 2)
>> +
>> +/* Bit definitions for ADC_V2 */
>> +#define ADC_V2_CON1_SOFT_RESET (1u << 2)
>> +
>> +#define ADC_V2_CON2_OSEL (1u << 10)
>> +#define ADC_V2_CON2_ESEL (1u << 9)
>> +#define ADC_V2_CON2_HIGHF (1u << 8)
>> +#define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4)
>> +#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0)
>> +#define ADC_V2_CON2_ACH_MASK 0xF
>> +
>> +/* Bit definitions common for ADC_V1 and ADC_V2 */
>> +#define ADC_V1_CON_EN_START (1u << 0)
>> +#define ADC_V1_DATX_MASK 0xFFF
>> +
>> +struct exynos5_adc {
>> + void __iomem *regs;
>> + struct clk *clk;
>> + unsigned int irq;
>> + struct regulator *vdd;
>> +
>> + struct completion completion;
>> +
>> + struct iio_map *map;
>> + u32 value;
>> + unsigned int version;
>> +};
>> +
>> +static const struct of_device_id exynos5_adc_match[] = {
>> + { .compatible = "samsung,exynos5250-adc", .data = (void *)ADC_V1 },
>> + { .compatible = "samsung,exynos5410-adc", .data = (void *)ADC_V2 },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, exynos5_adc_match);
>> +
>> +static inline unsigned int exynos5_adc_get_version(struct platform_device *pdev)
>> +{
>> + const struct of_device_id *match;
>> +
>> + match = of_match_node(exynos5_adc_match, pdev->dev.of_node);
>> + return (unsigned int)match->data;
>> +}
>> +
>> +/* default maps used by iio consumer (ex: ntc-thermistor driver) */
>> +static struct iio_map exynos5_adc_iio_maps[] = {
>> + {
>> + .consumer_dev_name = "0.ncp15wb473",
>> + .consumer_channel = "adc3",
>> + .adc_channel_label = "adc3",
>> + },
>> + {
>> + .consumer_dev_name = "1.ncp15wb473",
>> + .consumer_channel = "adc4",
>> + .adc_channel_label = "adc4",
>> + },
>> + {
>> + .consumer_dev_name = "2.ncp15wb473",
>> + .consumer_channel = "adc5",
>> + .adc_channel_label = "adc5",
>> + },
>> + {
>> + .consumer_dev_name = "3.ncp15wb473",
>> + .consumer_channel = "adc6",
>> + .adc_channel_label = "adc6",
>> + },
>> + {},
>> +};
>> +
>> +static int exynos5_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan,
>> + int *val,
>> + int *val2,
>> + long mask)
>> +{
>> + struct exynos5_adc *info = iio_priv(indio_dev);
>> + u32 con1, con2;
>> +
>> + if (mask == IIO_CHAN_INFO_RAW) {
>> + mutex_lock(&indio_dev->mlock);
>> +
>> + /* Select the channel to be used and Trigger conversion */
>> + if (info->version == ADC_V2) {
>> + con2 = readl(ADC_V2_CON2(info->regs));
>> + con2 &= ~ADC_V2_CON2_ACH_MASK;
>> + con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
>> + writel(con2, ADC_V2_CON2(info->regs));
>> +
>> + con1 = readl(ADC_V2_CON1(info->regs));
>> + writel(con1 | ADC_V1_CON_EN_START,
>> + ADC_V2_CON1(info->regs));
>> + } else {
>> + writel(chan->address, ADC_V1_MUX(info->regs));
>> +
>> + con1 = readl(ADC_V1_CON(info->regs));
>> + writel(con1 | ADC_V1_CON_EN_START,
>> + ADC_V1_CON(info->regs));
>> + }
>> +
>> + wait_for_completion(&info->completion);
>> + *val = info->value;
>> +
>> + mutex_unlock(&indio_dev->mlock);
>> +
>> + return IIO_VAL_INT;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static irqreturn_t exynos5_adc_isr(int irq, void *dev_id)
>> +{
>> + struct exynos5_adc *info = (struct exynos5_adc *)dev_id;
>> +
>> + /* Read value */
>> + info->value = readl(ADC_V1_DATX(info->regs)) &
>> + ADC_V1_DATX_MASK;
>> + /* clear irq */
>> + if (info->version == ADC_V2)
>> + writel(1, ADC_V2_INT_ST(info->regs));
>> + else
>> + writel(1, ADC_V1_INTCLR(info->regs));
>> +
>> + complete(&info->completion);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int exynos5_adc_reg_access(struct iio_dev *indio_dev,
>> + unsigned reg, unsigned writeval,
>> + unsigned *readval)
>> +{
>> + struct exynos5_adc *info = iio_priv(indio_dev);
>> + u32 ret;
>> +
>> + mutex_lock(&indio_dev->mlock);
>> +
>> + if (readval != NULL) {
>> + ret = readl(info->regs + reg);
>> + *readval = ret;
>> + } else
>> + ret = -EINVAL;
>> +
>> + mutex_unlock(&indio_dev->mlock);
>> +
>> + return ret;
>> +}
>> +
>> +static const struct iio_info exynos5_adc_iio_info = {
>> + .read_raw = &exynos5_read_raw,
>> + .debugfs_reg_access = &exynos5_adc_reg_access,
>> + .driver_module = THIS_MODULE,
>> +};
>> +
>> +#define ADC_V1_CHANNEL(_index, _id) { \
>> + .type = IIO_VOLTAGE, \
>> + .indexed = 1, \
>> + .channel = _index, \
>> + .address = _index, \
>> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
>> + .datasheet_name = _id, \
>> +}
>> +
>> +/** ADC core in EXYNOS5410 has 10 channels,
>> + * ADC core in EXYNOS5250 has 8 channels
>> +*/
>> +static const struct iio_chan_spec exynos5_adc_iio_channels[] = {
>> + ADC_V1_CHANNEL(0, "adc0"),
>> + ADC_V1_CHANNEL(1, "adc1"),
>> + ADC_V1_CHANNEL(2, "adc2"),
>> + ADC_V1_CHANNEL(3, "adc3"),
>> + ADC_V1_CHANNEL(4, "adc4"),
>> + ADC_V1_CHANNEL(5, "adc5"),
>> + ADC_V1_CHANNEL(6, "adc6"),
>> + ADC_V1_CHANNEL(7, "adc7"),
>> + ADC_V1_CHANNEL(8, "adc8"),
>> + ADC_V1_CHANNEL(9, "adc9"),
>> +};
>> +
>> +static int exynos5_adc_remove_devices(struct device *dev, void *c)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> +
>> + platform_device_unregister(pdev);
>> +
>> + return 0;
>> +}
>> +
>> +static void exynos5_adc_hw_init(struct exynos5_adc *info)
>> +{
>> + u32 con1, con2;
>> +
>> + if (info->version == ADC_V2) {
>> + con1 = ADC_V2_CON1_SOFT_RESET;
>> + writel(con1, ADC_V2_CON1(info->regs));
>> +
>> + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
>> + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
>> + writel(con2, ADC_V2_CON2(info->regs));
>> +
>> + /* Enable interrupts */
>> + writel(1, ADC_V2_INT_EN(info->regs));
>> + } else {
>> + /* set default prescaler values and Enable prescaler */
>> + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
>> +
>> + /* Enable 12-bit ADC resolution */
>> + con1 |= ADC_V1_CON_RES;
>> + writel(con1, ADC_V1_CON(info->regs));
>> + }
>> +}
>> +
>> +static int exynos5_adc_probe(struct platform_device *pdev)
>> +{
>> + struct exynos5_adc *info = NULL;
>> + struct device_node *np = pdev->dev.of_node;
>> + struct iio_dev *indio_dev = NULL;
>> + struct resource *mem;
>> + int ret = -ENODEV;
>> + int irq;
>> +
>> + if (!np)
>> + return ret;
>> +
>> + indio_dev = iio_device_alloc(sizeof(struct exynos5_adc));
>> + if (!indio_dev) {
>> + dev_err(&pdev->dev, "failed allocating iio device\n");
>> + return -ENOMEM;
>> + }
>> +
>> + info = iio_priv(indio_dev);
>> +
>> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +
>> + info->regs = devm_request_and_ioremap(&pdev->dev, mem);
>> +
>> + irq = platform_get_irq(pdev, 0);
>> + if (irq < 0) {
>> + dev_err(&pdev->dev, "no irq resource?\n");
>> + ret = irq;
>> + goto err_iio;
>> + }
>> +
>> + info->irq = irq;
>> +
>> + ret = request_irq(info->irq, exynos5_adc_isr,
>> + 0, dev_name(&pdev->dev), info);
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
>> + info->irq);
>> + goto err_iio;
>> + }
>> +
>> + info->clk = devm_clk_get(&pdev->dev, "adc");
>> + if (IS_ERR(info->clk)) {
>> + dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
>> + PTR_ERR(info->clk));
>> + ret = PTR_ERR(info->clk);
>> + goto err_irq;
>> + }
>> +
>> + info->vdd = devm_regulator_get(&pdev->dev, "vdd");
>> + if (IS_ERR(info->vdd)) {
>> + dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
>> + PTR_ERR(info->vdd));
>> + ret = PTR_ERR(info->vdd);
>> + goto err_irq;
>> + }
>> +
>> + info->version = exynos5_adc_get_version(pdev);
>> +
>> + platform_set_drvdata(pdev, indio_dev);
>> +
>> + init_completion(&info->completion);
>> +
>> + indio_dev->name = dev_name(&pdev->dev);
>> + indio_dev->dev.parent = &pdev->dev;
>> + indio_dev->dev.of_node = pdev->dev.of_node;
>> + indio_dev->info = &exynos5_adc_iio_info;
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> + indio_dev->channels = exynos5_adc_iio_channels;
>> + indio_dev->num_channels = ARRAY_SIZE(exynos5_adc_iio_channels);
>> +
>> + info->map = exynos5_adc_iio_maps;
>> +
>> + ret = iio_map_array_register(indio_dev, info->map);
>> + if (ret) {
>> + dev_err(&indio_dev->dev, "failed mapping iio, err: %d\n", ret);
>> + goto err_irq;
>> + }
>> +
>> + ret = iio_device_register(indio_dev);
>> + if (ret)
>> + goto err_map;
>> +
>> + ret = regulator_enable(info->vdd);
>> + if (ret)
>> + goto err_iio_dev;
>> +
>> + clk_prepare_enable(info->clk);
>> +
>> + exynos5_adc_hw_init(info);
>> +
>> + ret = of_platform_populate(np, exynos5_adc_match, NULL, &pdev->dev);
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "failed adding child nodes\n");
>> + goto err_of_populate;
>> + }
>> +
>> + return 0;
>> +
>> +err_of_populate:
>> + device_for_each_child(&pdev->dev, NULL, exynos5_adc_remove_devices);
>> +err_iio_dev:
>> + iio_device_unregister(indio_dev);
>> +err_map:
>> + iio_map_array_unregister(indio_dev, info->map);
>> +err_irq:
>> + free_irq(info->irq, info);
>> +err_iio:
>> + iio_device_free(indio_dev);
>> + return ret;
>> +}
>> +
>> +static int exynos5_adc_remove(struct platform_device *pdev)
>> +{
>> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>> + struct exynos5_adc *info = iio_priv(indio_dev);
>> +
>> + iio_device_unregister(indio_dev);
>> + iio_map_array_unregister(indio_dev, info->map);
>> + free_irq(info->irq, info);
>> + iio_device_free(indio_dev);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int exynos5_adc_suspend(struct device *dev)
>> +{
>> + struct exynos5_adc *info = dev_get_data(dev);
>> + u32 con;
>> +
>> + if (info->version == ADC_V2) {
>> + con = readl(ADC_V2_CON1(info->regs));
>> + con &= ~ADC_V1_CON_EN_START;
>> + writel(con, ADC_V2_CON1(info->regs));
>> + } else {
>> + con = readl(ADC_V1_CON(info->regs));
>> + con |= ADC_V1_CON_STANDBY;
>> + writel(con, ADC_V1_CON(info->regs));
>> + }
>> +
>> + clk_unprepare_disable(info->clk);
>> + regulator_disable(info->vdd);
>> +
>> + return 0;
>> +}
>> +
>> +static int exynos5_adc_resume(struct device *dev)
>> +{
>> + struct exynos5_adc *info = dev_get_data(dev);
>> + int ret;
>> +
>> + ret = regulator_enable(info->vdd);
>> + if (ret)
>> + return ret;
>> +
>> + clk_prepare_enable(info->clk);
>> +
>> + exynos5_adc_hw_init(info);
>> +
>> + return 0;
>> +}
>> +
>> +#else
>> +#define exynos5_adc_suspend NULL
>> +#define exynos5_adc_resume NULL
>> +#endif
>> +
>> +static SIMPLE_DEV_PM_OPS(exynos5_adc_pm_ops,
>> + exynos5_adc_suspend,
>> + exynos5_adc_resume);
>> +
>> +static struct platform_driver exynos5_adc_driver = {
>> + .probe = exynos5_adc_probe,
>> + .remove = exynos5_adc_remove,
>> + .driver = {
>> + .name = "exynos5-adc",
>> + .owner = THIS_MODULE,
>> + .of_match_table = of_match_ptr(exynos5_adc_match),
>> + .pm = &exynos5_adc_pm_ops,
>> + },
>> +};
>> +
>> +module_platform_driver(exynos5_adc_driver);
>> +
>> +MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@...sung.com>");
>> +MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
>> +MODULE_LICENSE("GPL");
--
Shine bright,
(: Nav :)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists