| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 14 Feb 2013 08:50:31 -0700
From: Shuah Khan <shuah.khan@...com>
To: scameron@...rdog.cce.hp.com
Cc: JBottomley@...allels.com, iss_storagedev@...com,
linux-scsi@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
shuahkhan@...il.com
Subject: Re: [PATCH] scsi/hpsa: fix to check dma mapping error
On Thu, 2013-02-14 at 10:39 -0600, scameron@...rdog.cce.hp.com wrote:
> On Wed, Feb 13, 2013 at 03:55:55PM -0700, Shuah Khan wrote:
> > Add missing dma mapping error check to fix the following warning from
> > dma-debug.
> >
> > [ 16.614739] hpsa 0000:03:00.0: DMA-API: device driver failed to check map error[device address=0x00000000001c2ec0] [size=64 bytes] [mapped as single]
> > [ 16.614833] Modules linked in: pata_atiixp tg3(+) ptp pps_core hpsa(+)
> > [ 16.615381] Pid: 324, comm: modprobe Not tainted 3.8.0-rc7+ #6
> > [ 16.615466] Call Trace:
> > [ 16.615552] [<ffffffff810581ef>] warn_slowpath_common+0x7f/0xc0
> > [ 16.615639] [<ffffffff810582e6>] warn_slowpath_fmt+0x46/0x50
> > [ 16.615747] [<ffffffff8134c129>] check_unmap+0x459/0x8a0
> > [ 16.615832] [<ffffffff81698aad>] ? schedule_timeout+0x1ed/0x250
> > [ 16.615918] [<ffffffff8134c70c>] debug_dma_unmap_page+0x5c/0x60
> > [ 16.616008] [<ffffffffa0002776>] hpsa_pci_unmap+0x86/0xd0 [hpsa]
> > [ 16.616094] [<ffffffffa00028c0>] hpsa_scsi_do_simple_cmd_with_retry+0x100/0x2a0 [hpsa]
> > [ 16.616195] [<ffffffffa0004863>] hpsa_scsi_do_inquiry+0x83/0x100 [hpsa]
> > [ 16.616282] [<ffffffffa0006ce9>] hpsa_init_one+0x1839/0x1ce0 [hpsa]
> > [ 16.616369] [<ffffffff811fc2d8>] ? sysfs_new_dirent+0x58/0x140
> > [ 16.616456] [<ffffffff8135db9b>] local_pci_probe+0x4b/0x80
> > [ 16.616542] [<ffffffff8135f471>] pci_device_probe+0x101/0x120
> > [ 16.616629] [<ffffffff814328db>] driver_probe_device+0x7b/0x240
> > [ 16.616715] [<ffffffff81432b4b>] __driver_attach+0xab/0xb0
> > [ 16.616801] [<ffffffff81432aa0>] ? driver_probe_device+0x240/0x240
> > [ 16.616888] [<ffffffff81430cf6>] bus_for_each_dev+0x56/0x90
> > [ 16.617001] [<ffffffff8143240e>] driver_attach+0x1e/0x20
> > [ 16.617087] [<ffffffff81431f80>] bus_add_driver+0x190/0x290
> > [ 16.617173] [<ffffffffa0011000>] ? 0xffffffffa0010fff
> > [ 16.617259] [<ffffffff814330aa>] driver_register+0x7a/0x160
> > [ 16.617345] [<ffffffffa0011000>] ? 0xffffffffa0010fff
> > [ 16.617431] [<ffffffff8135e42c>] __pci_register_driver+0x4c/0x50
> > [ 16.617519] [<ffffffffa001101e>] hpsa_init+0x1e/0x1000 [hpsa]
> > [ 16.617605] [<ffffffff8100206f>] do_one_initcall+0x3f/0x170
> > [ 16.617692] [<ffffffff810bef7e>] load_module+0x16ae/0x1c40
> > [ 16.617777] [<ffffffff810bbb70>] ? show_initstate+0x50/0x50
> > [ 16.617863] [<ffffffff8169f71e>] ? do_page_fault+0xe/0x10
> > [ 16.617949] [<ffffffff810bf5de>] sys_init_module+0xce/0x100
> > [ 16.618035] [<ffffffff816a3d99>] system_call_fastpath+0x16/0x1b
> > [ 16.618157] ---[ end trace 260311c4be71d0dc ]---
> > [ 16.618228] Mapped at:
> > [ 16.618311] [<ffffffff8134b189>] debug_dma_map_page+0xb9/0x160
> > [ 16.618451] [<ffffffffa0004132>] fill_cmd.isra.31+0x252/0x400 [hpsa]
> > [ 16.618613] [<ffffffffa0004853>] hpsa_scsi_do_inquiry+0x73/0x100 [hpsa]
> > [ 16.618766] [<ffffffffa0006ce9>] hpsa_init_one+0x1839/0x1ce0 [hpsa]
> > [ 16.618919] [<ffffffff8135db9b>] local_pci_probe+0x4b/0x80
> > [ 16.619286] scsi3 : hpsa
> >
> >
> > Signed-off-by: Shuah Khan <shuah.khan@...com>
> > CC: stable@...r.kernel.org
> > ---
> > drivers/scsi/hpsa.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
> > index 4f33806..3b4d195 100644
> > --- a/drivers/scsi/hpsa.c
> > +++ b/drivers/scsi/hpsa.c
> > @@ -1405,6 +1405,11 @@ static void hpsa_map_one(struct pci_dev *pdev,
> > }
> >
> > addr64 = (u64) pci_map_single(pdev, buf, buflen, data_direction);
> > + if (dma_mapping_error(&pdev->dev, addr64)) {
> > + cp->Header.SGList = 0;
> > + cp->Header.SGTotal = 0;
> > + return;
> > + }
> > cp->SG[0].Addr.lower =
> > (u32) (addr64 & (u64) 0x00000000FFFFFFFF);
> > cp->SG[0].Addr.upper =
>
> Probably should bubble that error up through hpsa_map_one return value
> (currently void, but I guess that needs to change) and that's called from
> one place, fill_cmd(), also currently returning void (needs to change).
> I think all the places that call fill_cmd() have failure paths that
> can be used.
>
> There are a couple other places in hpsa that we call pci_map_single and do
> not subsequently call dma_mapping_error().
>
> I don't thinking just setting SGList = 0 and SGTotal = 0 is going to
> do something good (I expect it will end up causing the cnotroller to
> reject the command as invalid -- and pretty much all the commands that
> go through this path are driver generated commands, so, if the driver
> is generating invalid commands, that would be a bug.
>
> So, I don't think this patch is quite correct as is.
>
I wasn't very sure if this patch is the right way to address the
error :)
> But, thanks for bringing this failure to call dma_mapping_error to my
> attention.
>
> So what cmdline options or config options did you enable to get this check?
>
> was it something like:
>
> dma_debug=1 dma_debug_entries=???
Build Linux 3.8 (any rc will do, I tested with Linux 3.8-rc7) with
CONFIG_DMA_API_DEBUG enabled.
CONFIG_DMA_API_DEBUG=y
btw once I had this patch in, I saw another error
[ 18.795456] ------------[ cut here ]------------
[ 18.795582] WARNING: at lib/dma-debug.c:933 check_unmap+0x459/0x8a0()
[ 18.795661] Hardware name: ProLiant DL385p Gen8
[ 18.795723] hpsa 0000:03:00.0: DMA-API: device driver failed to check
map error[device address=0x0000000000733000] [size=32 bytes] [mapped as
single]
[ 18.795798] Modules linked in: pata_atiixp tg3 ptp pps_core hpsa
[ 18.796167] Pid: 0, comm: swapper/3 Not tainted 3.8.0-rc7+ #8
[ 18.796230] Call Trace:
[ 18.796288] <IRQ> [<ffffffff810581ef>] warn_slowpath_common
+0x7f/0xc0
[ 18.796466] [<ffffffff810582e6>] warn_slowpath_fmt+0x46/0x50
[ 18.796531] [<ffffffff8134c129>] check_unmap+0x459/0x8a0
[ 18.796596] [<ffffffff8156fc46>] ? dma_ops_free_addresses+0x46/0x50
[ 18.796661] [<ffffffff8134c70c>] debug_dma_unmap_page+0x5c/0x60
[ 18.796727] [<ffffffffa00017f0>] complete_scsi_command+0xe0/0x500
[hpsa]
[ 18.796793] [<ffffffffa0003a8e>] do_hpsa_intr_msi+0x12e/0x270 [hpsa]
[ 18.796860] [<ffffffff810e9695>] handle_irq_event_percpu+0x55/0x210
[ 18.796925] [<ffffffff810e989e>] handle_irq_event+0x4e/0x80
[ 18.796989] [<ffffffff810ec2f4>] handle_edge_irq+0x84/0x130
[ 18.797053] [<ffffffff81016202>] handle_irq+0x22/0x40
[ 18.797117] [<ffffffff816a592a>] do_IRQ+0x5a/0xe0
[ 18.797180] [<ffffffff8169b92d>] common_interrupt+0x6d/0x6d
[ 18.797243] <EOI> [<ffffffff8101b959>] ? sched_clock+0x9/0x10
[ 18.797393] [<ffffffff81556b20>] ? cpuidle_wrap_enter+0x50/0xa0
[ 18.797458] [<ffffffff81556b19>] ? cpuidle_wrap_enter+0x49/0xa0
[ 18.797523] [<ffffffff81556b80>] cpuidle_enter_tk+0x10/0x20
[ 18.797613] [<ffffffff8155673f>] cpuidle_idle_call+0xaf/0x2b0
[ 18.797677] [<ffffffff8101d4df>] cpu_idle+0xcf/0x120
[ 18.797740] [<ffffffff81686e42>] start_secondary+0x1fa/0x201
[ 18.797804] ---[ end trace 56a89d480f09df70 ]---
[ 18.797865] Mapped at:
[ 18.797923] [<ffffffff8134b189>] debug_dma_map_page+0xb9/0x160
[ 18.798028] [<ffffffffa00025fe>] hpsa_scsi_queue_command+0x45e/0x4b0
[hpsa]
[ 18.799127] [<ffffffff81467ac6>] scsi_dispatch_cmd+0x136/0x2f0
[ 18.799233] [<ffffffff8146ecd2>] scsi_request_fn+0x382/0x550
[ 18.799339] [<ffffffff81306d07>] __blk_run_queue+0x37/0x50
I can help with testing fixes to these problems.
-- Shuah
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists