| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1360811091.23152.25.camel@gandalf.local.home>
Date: Wed, 13 Feb 2013 22:04:51 -0500
From: Steven Rostedt <rostedt@...dmis.org>
To: LKML <linux-kernel@...r.kernel.org>,
RT <linux-rt-users@...r.kernel.org>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Carsten Emde <C.Emde@...dl.org>, John Kacur <jkacur@...hat.com>
Subject: [ANNOUNCE] 3.4.29-rt42
Dear RT Folks,
I'm pleased to announce the 3.4.29-rt42 stable release.
You can get this release via the git tree at:
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git
Head SHA1: eab759b5f284bd3c29aaa12f41623ef2cb2ac60d
Or to build 3.4.29-rt42 directly, the following patches should be applied:
http://www.kernel.org/pub/linux/kernel/v3.x/linux-3.4.tar.xz
http://www.kernel.org/pub/linux/kernel/v3.x/patch-3.4.29.xz
http://www.kernel.org/pub/linux/kernel/projects/rt/3.4/patch-3.4.29-rt42.patch.xz
You can also build from 3.4.29-rt41 by applying the incremental patch:
http://www.kernel.org/pub/linux/kernel/projects/rt/3.4/incr/patch-3.4.29-rt41-rt42.patch.xz
Enjoy,
-- Steve
Changes from 3.4.29-rt41:
---
Steven Rostedt (1):
Linux 3.4.29-rt42
Thomas Gleixner (5):
drivers-tty-pl011-irq-disable-madness.patch
mmci: Remove bogus local_irq_save()
sched: Init idle->on_rq in init_idle()
sched: Check for idle task in might_sleep()
mm: swap: Initialize local locks early
----
drivers/mmc/host/mmci.c | 5 -----
drivers/tty/serial/amba-pl011.c | 15 ++++++++++-----
kernel/sched/core.c | 4 +++-
localversion-rt | 2 +-
mm/swap.c | 12 +++++++++---
5 files changed, 23 insertions(+), 15 deletions(-)
---------------------------
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 032b847..6f8a1a7 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -910,15 +910,12 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
struct sg_mapping_iter *sg_miter = &host->sg_miter;
struct variant_data *variant = host->variant;
void __iomem *base = host->base;
- unsigned long flags;
u32 status;
status = readl(base + MMCISTATUS);
dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
- local_irq_save(flags);
-
do {
unsigned int remain, len;
char *buffer;
@@ -958,8 +955,6 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
sg_miter_stop(sg_miter);
- local_irq_restore(flags);
-
/*
* If we have less than the fifo 'half-full' threshold to transfer,
* trigger a PIO interrupt as soon as any data is available.
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index b69356c..7b29c92 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1788,13 +1788,19 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
clk_enable(uap->clk);
- local_irq_save(flags);
+ /*
+ * local_irq_save(flags);
+ *
+ * This local_irq_save() is nonsense. If we come in via sysrq
+ * handling then interrupts are already disabled. Aside of
+ * that the port.sysrq check is racy on SMP regardless.
+ */
if (uap->port.sysrq)
locked = 0;
else if (oops_in_progress)
- locked = spin_trylock(&uap->port.lock);
+ locked = spin_trylock_irqsave(&uap->port.lock, flags);
else
- spin_lock(&uap->port.lock);
+ spin_lock_irqsave(&uap->port.lock, flags);
/*
* First save the CR then disable the interrupts
@@ -1816,8 +1822,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
writew(old_cr, uap->port.membase + UART011_CR);
if (locked)
- spin_unlock(&uap->port.lock);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
clk_disable(uap->clk);
}
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index fec5603..751ec60 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5264,6 +5264,7 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu)
rcu_read_unlock();
rq->curr = rq->idle = idle;
+ idle->on_rq = 1;
#if defined(CONFIG_SMP)
idle->on_cpu = 1;
#endif
@@ -7535,7 +7536,8 @@ void __might_sleep(const char *file, int line, int preempt_offset)
static unsigned long prev_jiffy; /* ratelimiting */
rcu_sleep_check(); /* WARN_ON_ONCE() by default, no rate limit reqd. */
- if ((preempt_count_equals(preempt_offset) && !irqs_disabled()) ||
+ if ((preempt_count_equals(preempt_offset) && !irqs_disabled() &&
+ !is_idle_task(current)) ||
system_state != SYSTEM_RUNNING || oops_in_progress)
return;
if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
diff --git a/localversion-rt b/localversion-rt
index 629e0b4..8bdfb9a 100644
--- a/localversion-rt
+++ b/localversion-rt
@@ -1 +1 @@
--rt41
+-rt42
diff --git a/mm/swap.c b/mm/swap.c
index 2051da9..62dc70c 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -767,6 +767,15 @@ unsigned pagevec_lookup_tag(struct pagevec *pvec, struct address_space *mapping,
}
EXPORT_SYMBOL(pagevec_lookup_tag);
+/* Early setup for the local locks */
+static int __init swap_init_locks(void)
+{
+ local_irq_lock_init(rotate_lock);
+ local_irq_lock_init(swap_lock);
+ return 1;
+}
+early_initcall(swap_init_locks);
+
/*
* Perform any setup for the swap system
*/
@@ -774,9 +783,6 @@ void __init swap_setup(void)
{
unsigned long megs = totalram_pages >> (20 - PAGE_SHIFT);
- local_irq_lock_init(rotate_lock);
- local_irq_lock_init(swap_lock);
-
#ifdef CONFIG_SWAP
bdi_init(swapper_space.backing_dev_info);
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists