| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1360811172.23152.27.camel@gandalf.local.home>
Date: Wed, 13 Feb 2013 22:06:12 -0500
From: Steven Rostedt <rostedt@...dmis.org>
To: LKML <linux-kernel@...r.kernel.org>,
RT <linux-rt-users@...r.kernel.org>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Carsten Emde <C.Emde@...dl.org>, John Kacur <jkacur@...hat.com>
Subject: [ANNOUNCE] 3.0.62-rt88
Dear RT Folks,
I'm pleased to announce the 3.0.62-rt88 stable release.
You can get this release via the git tree at:
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git
Head SHA1: 3568cae0aa56660cadd607e19096ad853822b28c
Or to build 3.0.62-rt88 directly, the following patches should be applied:
http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.tar.xz
http://www.kernel.org/pub/linux/kernel/v3.0/patch-3.0.62.xz
http://www.kernel.org/pub/linux/kernel/projects/rt/3.0/patch-3.0.62-rt88.patch.xz
You can also build from 3.0.62-rt87 by applying the incremental patch:
http://www.kernel.org/pub/linux/kernel/projects/rt/3.0/incr/patch-3.0.62-rt87-rt88.patch.xz
Enjoy,
-- Steve
Changes from 3.0.62-rt87:
---
Steven Rostedt (1):
Linux 3.0.62-rt88
Thomas Gleixner (4):
drivers-tty-pl011-irq-disable-madness.patch
mmci: Remove bogus local_irq_save()
sched: Init idle->on_rq in init_idle()
mm: swap: Initialize local locks early
----
drivers/mmc/host/mmci.c | 5 -----
drivers/tty/serial/amba-pl011.c | 15 ++++++++++-----
kernel/sched.c | 1 +
localversion-rt | 2 +-
mm/swap.c | 12 +++++++++---
5 files changed, 21 insertions(+), 14 deletions(-)
---------------------------
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 9394d0b..8d0bf36 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -741,15 +741,12 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
struct sg_mapping_iter *sg_miter = &host->sg_miter;
struct variant_data *variant = host->variant;
void __iomem *base = host->base;
- unsigned long flags;
u32 status;
status = readl(base + MMCISTATUS);
dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
- local_irq_save(flags);
-
do {
unsigned int remain, len;
char *buffer;
@@ -789,8 +786,6 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
sg_miter_stop(sg_miter);
- local_irq_restore(flags);
-
/*
* If we have less than the fifo 'half-full' threshold to transfer,
* trigger a PIO interrupt as soon as any data is available.
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 7cbb367..40356ae 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1754,13 +1754,19 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
clk_enable(uap->clk);
- local_irq_save(flags);
+ /*
+ * local_irq_save(flags);
+ *
+ * This local_irq_save() is nonsense. If we come in via sysrq
+ * handling then interrupts are already disabled. Aside of
+ * that the port.sysrq check is racy on SMP regardless.
+ */
if (uap->port.sysrq)
locked = 0;
else if (oops_in_progress)
- locked = spin_trylock(&uap->port.lock);
+ locked = spin_trylock_irqsave(&uap->port.lock, flags);
else
- spin_lock(&uap->port.lock);
+ spin_lock_irqsave(&uap->port.lock, flags);
/*
* First save the CR then disable the interrupts
@@ -1782,8 +1788,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
writew(old_cr, uap->port.membase + UART011_CR);
if (locked)
- spin_unlock(&uap->port.lock);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
clk_disable(uap->clk);
}
diff --git a/kernel/sched.c b/kernel/sched.c
index 858f5df..53b78f0 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6139,6 +6139,7 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu)
rcu_read_unlock();
rq->curr = rq->idle = idle;
+ idle->on_rq = 1;
#if defined(CONFIG_SMP)
idle->on_cpu = 1;
#endif
diff --git a/localversion-rt b/localversion-rt
index bd5aee3..666227d 100644
--- a/localversion-rt
+++ b/localversion-rt
@@ -1 +1 @@
--rt87
+-rt88
diff --git a/mm/swap.c b/mm/swap.c
index 069390f..662972f 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -772,6 +772,15 @@ unsigned pagevec_lookup(struct pagevec *pvec, struct address_space *mapping,
EXPORT_SYMBOL(pagevec_lookup);
+/* Early setup for the local locks */
+static int __init swap_init_locks(void)
+{
+ local_irq_lock_init(rotate_lock);
+ local_irq_lock_init(swap_lock);
+ return 1;
+}
+early_initcall(swap_init_locks);
+
unsigned pagevec_lookup_tag(struct pagevec *pvec, struct address_space *mapping,
pgoff_t *index, int tag, unsigned nr_pages)
{
@@ -789,9 +798,6 @@ void __init swap_setup(void)
{
unsigned long megs = totalram_pages >> (20 - PAGE_SHIFT);
- local_irq_lock_init(rotate_lock);
- local_irq_lock_init(swap_lock);
-
#ifdef CONFIG_SWAP
bdi_init(swapper_space.backing_dev_info);
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists